Jump to content
SAU Community

R34 Gtt Shopping List - Wtb Bits And Pieces

darksky34

By darksky34,
in New South Wales

 Share

Recommended Posts

darksky34 Mentor

darksky34

Posted
Posted

hey all. I already have a thread for this in the WTB section but thought I'd put it in the NSW section too since that might make it easier if anyone here has pieces. Mods if this belongs ONLY in the WTB section then feel free to delete the thread.

Basically, got my car, have a few bits and pieces - mainly cosmetics that I want to fix up. Here's the list. Located in Sydney, NSW around Hornsby area so am willing to drive a bit to pick up (would have to be weekends) but otherwise am also willing to pay postage - depends how much it costs.

Have had some offers but still waiting on pics etc.

  • Armrest centre console lid - my hinge is half snapped

  • Need a new rear driver-side speaker mesh cover in the back, the ones that are on the parcel shelf at the back - Haven't checked if this is removable by itself, so if not, may need an entirely new parcel shelf
  • Driver side rain shield - the clear red colour piece of plastic that sits above the door so you can open some window when it's raining...?
  • If anybody has an aftermarket centre dash console - from the 3 gauges downwards to the stereo area then welcome to show me some pics and make me an offer, I don't quite like the material of the stock console.

  • If anybody has nismo indicators at all, let me know too.
  • if you have any headlights sets/bulbs that you want to sell off, also make me an offer.
  • Rear seat covers - make me an offer OR if you have a set of rear seats for sale also let me know.
  • Castor bushes - nolathane etc etc + rack ends. please contact me ASAP

Please PM me or post here if you have something! I always check.

Cheers guys.

34GeeTeeTee Grand Master

34GeeTeeTee

Posted
Posted

The speaker mesh are pretty hard to find! I gave up lol

The weather shield and dash bits can be had in the CF group buys on SAU pretty cheap and easy.

For the castor bushes and rack ends etc look up GKTECH.COM and similar and you will get a good deal, they are whole arms though.

darksky34 Mentor

darksky34

Posted
  • Author
Posted

haha Mat, found some guys with a parcel shelf - so may just swap out the entire thing. don't seem to be many group buys going on now...?

i know that my castor bushes and rack ends need replacing but i'm after a quote on how much it'd cost to replace all/most of the suspension system.

darksky34 Mentor

darksky34

Posted
  • Author
Posted

Bump + update(s)

  • Armrest centre console lid - my hinge is half snapped

  • Need a new rear driver-side speaker mesh cover in the back, the ones that are on the parcel shelf at the back - Haven't checked if this is removable by itself, so if not, may need an entirely new parcel shelf
  • Driver side rain shield - weather shield. will take offers for both passenger + driver. also do not mind if aftermarket.
  • If anybody has an aftermarket centre dash console - from the 3 gauges downwards to the stereo area then welcome to show me some pics and make me an offer, I don't quite like the material of the stock console.

  • If anybody has nismo SMOKED indicators at all, let me know too.
  • if you have PROJECTOR headlights sets/bulbs that you want to sell off, also make me an offer.
  • Rear seat covers - make me an offer OR if you have a set of rear seats for sale also let me know.
  • Castor bushes - nolathane etc etc + rack ends please contact me ASAP
  • Stock R34 GTT BOV needed

  • 4 weeks later...
darksky34 Mentor

darksky34

Posted
  • Author
Posted

Another update. Items still required.

Bump + update(s)

  • Armrest centre console lid - my hinge is half snapped

  • Need a new rear driver-side speaker mesh cover in the back, the ones that are on the parcel shelf at the back - Haven't checked if this is removable by itself, so if not, may need an entirely new parcel shelf
  • Driver side rain shield - weather shield. will take offers for both passenger + driver. also do not mind if aftermarket.
  • If anybody has an aftermarket centre dash console - from the 3 gauges downwards to the stereo area then welcome to show me some pics and make me an offer, I don't quite like the material of the stock console.

  • If anybody has nismo SMOKED Front bar indicators at all, let me know too.
  • Rear seat covers - make me an offer OR if you have a set of rear seats for sale also let me know.

  • Stock R34 GTT BOV needed

34GeeTeeTee Grand Master

34GeeTeeTee

Posted
Posted

Another update. Items still required.

Bump + update(s)

  • Armrest centre console lid - my hinge is half snapped

  • Need a new rear driver-side speaker mesh cover in the back, the ones that are on the parcel shelf at the back - Haven't checked if this is removable by itself, so if not, may need an entirely new parcel shelf
  • Driver side rain shield - weather shield. will take offers for both passenger + driver. also do not mind if aftermarket.
  • If anybody has an aftermarket centre dash console - from the 3 gauges downwards to the stereo area then welcome to show me some pics and make me an offer, I don't quite like the material of the stock console.

  • If anybody has nismo SMOKED Front bar indicators at all, let me know too.
  • Rear seat covers - make me an offer OR if you have a set of rear seats for sale also let me know.

  • Stock R34 GTT BOV needed

You can try my stock BOV if you want, but you have to come get it :P And bring me a 6 pack lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • DraftySquash
      Help Understand GTT Boost Setup

      By DraftySquash · Posted

      It was roughly 3.5 hours.    car went in around 11:00 and I was done around 2:30 He did the initial runs, install the BC and then Nistune install and tune.  The best part was sitting in the lobby and hearing the skyline on full throttle at the dyno 😂😂
    • Milkmun
      Help Understand GTT Boost Setup

      By Milkmun · Posted

      Glad it all went smooth. How long did the tuning process take?
    • DraftySquash
      Help Understand GTT Boost Setup

      By DraftySquash · Posted

      Yeah that was kind of the same feedback my tuner gave me.  the boost tee is until I can sort out my plan for the electronic boost controller and what I’d get, where I’d mount the dash etc.  I’m happy with this until I can figure it out. Not a big fan of the A-pillar gauges. I’d like to get a clean install of the boost gauge - something digital like GFB.  Something like that might fit neatly where the ashtray is and look clean. I feel like replacing the OEM triple gauge is a bit extreme for a weekender like my skyline. And it’s not making crazy power to need all the additional sensors/gauges. 
    • B-Boi34
      UniClutch

      By B-Boi34 · Posted

      I'm about to swap my box to Tremec T56 Magnum F & initially thinking of re-using my DCS twin plate (can get it re centred for the bigger spline) but it's been called out the box will be noisy (rattle) as the clutch is unsprung.  So I'm doing as much research as possible. I'm not so worried about holding the power as I'll go the track version which on paper will hold the maybe 1000hp I make. It's the longevity I worry about. DCS told me they don't use a sprung centre as it's just something that can break. The uni clutch has a very complicated sprung centre. Any one had or heard about any issues with it failing? Thanks in advance.
    • Kinkstaah
      Help Understand GTT Boost Setup

      By Kinkstaah · Posted

      Auto is at least 10% (from my real, actual experience with different torque converters and manual on the same setup) ~185rwkw at 11.6psi (peak!) is entirely what one would expect without a FMIC or anything else on the intake, it does bleed off towards the higher RPM so it's what, 9psi there? Note: There is nothing that can be done about this with a manual boost tee. If you want to hold it steady and gain more top end, well - You will need electronic boost control.....
×
×
  • Create New...