Jump to content
SAU Community

R34 Gtt Shopping List - Wtb Bits And Pieces

darksky34

By darksky34,
in New South Wales

 Share

Recommended Posts

darksky34 Mentor

darksky34

Posted
Posted

hey all. I already have a thread for this in the WTB section but thought I'd put it in the NSW section too since that might make it easier if anyone here has pieces. Mods if this belongs ONLY in the WTB section then feel free to delete the thread.

Basically, got my car, have a few bits and pieces - mainly cosmetics that I want to fix up. Here's the list. Located in Sydney, NSW around Hornsby area so am willing to drive a bit to pick up (would have to be weekends) but otherwise am also willing to pay postage - depends how much it costs.

Have had some offers but still waiting on pics etc.

  • Armrest centre console lid - my hinge is half snapped

  • Need a new rear driver-side speaker mesh cover in the back, the ones that are on the parcel shelf at the back - Haven't checked if this is removable by itself, so if not, may need an entirely new parcel shelf
  • Driver side rain shield - the clear red colour piece of plastic that sits above the door so you can open some window when it's raining...?
  • If anybody has an aftermarket centre dash console - from the 3 gauges downwards to the stereo area then welcome to show me some pics and make me an offer, I don't quite like the material of the stock console.

  • If anybody has nismo indicators at all, let me know too.
  • if you have any headlights sets/bulbs that you want to sell off, also make me an offer.
  • Rear seat covers - make me an offer OR if you have a set of rear seats for sale also let me know.
  • Castor bushes - nolathane etc etc + rack ends. please contact me ASAP

Please PM me or post here if you have something! I always check.

Cheers guys.

34GeeTeeTee Grand Master

34GeeTeeTee

Posted
Posted

The speaker mesh are pretty hard to find! I gave up lol

The weather shield and dash bits can be had in the CF group buys on SAU pretty cheap and easy.

For the castor bushes and rack ends etc look up GKTECH.COM and similar and you will get a good deal, they are whole arms though.

darksky34 Mentor

darksky34

Posted
  • Author
Posted

haha Mat, found some guys with a parcel shelf - so may just swap out the entire thing. don't seem to be many group buys going on now...?

i know that my castor bushes and rack ends need replacing but i'm after a quote on how much it'd cost to replace all/most of the suspension system.

darksky34 Mentor

darksky34

Posted
  • Author
Posted

Bump + update(s)

  • Armrest centre console lid - my hinge is half snapped

  • Need a new rear driver-side speaker mesh cover in the back, the ones that are on the parcel shelf at the back - Haven't checked if this is removable by itself, so if not, may need an entirely new parcel shelf
  • Driver side rain shield - weather shield. will take offers for both passenger + driver. also do not mind if aftermarket.
  • If anybody has an aftermarket centre dash console - from the 3 gauges downwards to the stereo area then welcome to show me some pics and make me an offer, I don't quite like the material of the stock console.

  • If anybody has nismo SMOKED indicators at all, let me know too.
  • if you have PROJECTOR headlights sets/bulbs that you want to sell off, also make me an offer.
  • Rear seat covers - make me an offer OR if you have a set of rear seats for sale also let me know.
  • Castor bushes - nolathane etc etc + rack ends please contact me ASAP
  • Stock R34 GTT BOV needed

  • 4 weeks later...
darksky34 Mentor

darksky34

Posted
  • Author
Posted

Another update. Items still required.

Bump + update(s)

  • Armrest centre console lid - my hinge is half snapped

  • Need a new rear driver-side speaker mesh cover in the back, the ones that are on the parcel shelf at the back - Haven't checked if this is removable by itself, so if not, may need an entirely new parcel shelf
  • Driver side rain shield - weather shield. will take offers for both passenger + driver. also do not mind if aftermarket.
  • If anybody has an aftermarket centre dash console - from the 3 gauges downwards to the stereo area then welcome to show me some pics and make me an offer, I don't quite like the material of the stock console.

  • If anybody has nismo SMOKED Front bar indicators at all, let me know too.
  • Rear seat covers - make me an offer OR if you have a set of rear seats for sale also let me know.

  • Stock R34 GTT BOV needed

34GeeTeeTee Grand Master

34GeeTeeTee

Posted
Posted

Another update. Items still required.

Bump + update(s)

  • Armrest centre console lid - my hinge is half snapped

  • Need a new rear driver-side speaker mesh cover in the back, the ones that are on the parcel shelf at the back - Haven't checked if this is removable by itself, so if not, may need an entirely new parcel shelf
  • Driver side rain shield - weather shield. will take offers for both passenger + driver. also do not mind if aftermarket.
  • If anybody has an aftermarket centre dash console - from the 3 gauges downwards to the stereo area then welcome to show me some pics and make me an offer, I don't quite like the material of the stock console.

  • If anybody has nismo SMOKED Front bar indicators at all, let me know too.
  • Rear seat covers - make me an offer OR if you have a set of rear seats for sale also let me know.

  • Stock R34 GTT BOV needed

You can try my stock BOV if you want, but you have to come get it :P And bring me a 6 pack lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      Question about BoV on RB25DET NEO

      By Kapr · Posted

      Hi. Iam just curisou about this topic. I saw this video. It is about Greddy Type FV2. I know that BoVs are about that sound but how and when to use it? I read some topic here and from what i have understand on stock RB with MAF there will be some "problems" if you use this BoV? It vents the air in to the atmosphere and the MAF on stock car needs this air back in to the intake and not out? Or is it wrong? If so...i saw you can put some adaptor to circule air back...but does that not "loose" that sound? I saw another BoV from Turbosmart and it has two "exhaust" like ports? One is for the stock tubing for letting air back and one is for "sound" and let the air in the atmosphere? Can someone please explain? This is the Greddy one:  And this is the Turbosmart.     THANK YOU!!
    • Dose Pipe Sutututu
      Low oil pressure after WOT

      By Dose Pipe Sutututu · Posted

      That dirty voltage drop is the culprit I suspect 
    • pogman
      Low oil pressure after WOT

      By pogman · Posted

      i cant get them all in 1 screenshot unfortunately as i just dont know how to move things around tbh, but they are all from the same log and the line crosses at the same point for all of them
    • MBS206
      The Ls1 R33 Of Fury

      By MBS206 · Posted

      It's about time I start work on my sun tan. So I knocked up a few parts that will all combine together to become my new power steering reservoir. Now just to produce an abundance of UV and IR rays while melting a heap of bits of alu to become one... Well, that's after I put one more hole in it for the return line to plumb to. It likely won't be this weekend, as Sunday I'm meant to be in doing some last minute stuff to the AMG race car, and the weekend after will be filled with non my Skyline stuff, followed by Bathurst 6 hour. So I don't expect to get to melt metal for at least 3 weeks.   I also managed to stuff up and start cutting the hole for the res to pump pipe on the wrong side of the line... It means instead of the lines being nice and tight against the inner guard, they'll be out off the guard.    The size of it means I should end up with about 1.8L of power steering fluid, and still have space for another half a litre before it reaches the overflow/breather. This is wayyyyyyy more capacity than factory, which should help keep Powersteer oil temps lower, and the design hopefully allows it to prevent any aerated oil being able to makes its way down to the bottom as it'll have a couple of baffles and some hopeful trickery to force air bubbles away from the bottom.
    • MBS206
      Low oil pressure after WOT

      By MBS206 · Posted

      The log you did with ECU voltage, can you log the other things too like rpm and oil pressure? Need all that info together to compare easily
×
×
  • Create New...