Jump to content
SAU Community

Recommended Posts

For sale is the engine out of my R33, it was running 390rwkw with the below list of parts, add in a set of cams and you have yourself a 400kw capable package. I have receipts for most of the parts some have been lost over the years but i can supply a PDF of the ones i have upon request.

The engine is currently at an engine shop to be pulled down and checked out, if all is good it will have as minimum all bearings replaced when it is put back together, meaning you get effectively a brand new engine

The engine will be supplied complete with everything bolted on from throttle body to dump pipe, and sensors.

Parts list:

RB30 series 2 Block

R33 RB25DET head

Forged pistons (Arias 9.3:1 CR, oversize 86.5mm bore)

MLS 1.3mm Head gasket

Forged rods (Eagle with ARP bolts)

Grub screwed stock RB30 crank

Pro Engines extended oil pump drive

RB26 standard water pump

RB26 N1 Oil pump

Solid line External oil feed for VCT using T piece at the oil pressure sensor.

ARP main studs

ARP head studs

ETM steam pipe high mount exhaust manifold (ceramic coated)

Synchronic 50mm external waste gate (plumbed back into dump pipe)

ETM 4" Dump pipe reducing to 3.5” at exit

Garrett GT3582R 0.82 AR rear housing (rear housing has been ceramic coated)

Greddy Intake Plenum (genuine not a cheap ebay copy)

Q45 90mm Throttle body

Balanced pistons, rods, crank (to within 0.1 gram)

Stock cams with VCT retained

Aftermarket valve springs

Stock fuel rail

Nismo 740cc injectors

Stock fuel pressure regulator

exhaust side of head oil drain to sump

ASR 6.5L extended/baffled sump with additional -10 fittings (everything that returns oil to the sump has its own fitting, no T pieces or Y joins)

Yellow Jacket coil packs

4" intake pipe with pod filter

Ignitor, CAS other factory sensors/electronics

NISMO R33 engine mounts

Will not come with power steering pump, aircon compressor or harmonic balancer

Can be supplied with the alternator and spare stock coil packs if you wish

Asking $12,000.

Contact by PM or phone/sms 0419302418

Link to comment
https://www.sau.com.au/forums/topic/417312-forged-rb2530-complete-engine/
Share on other sites

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...