Jump to content
SAU Community

Recommended Posts

Part:

RB26/30 long motor

Condition:

Built but never run :(

Description:

Typical story, got rid of project car due to purchase of house and the wife was pregnant with my first child...now the wife is pregnant with the second kid and I have a bathroom that desperately needs to be redone.

All up I remember spending around the $14,000 mark, so my loss is your gain.

More info:

- A8 block (bored, honed, decked)

- R32 GTR head

- HKS gaskets

- Head cleaned and serviced

- shot peened and linished conrods

- Crank/oil pump collar

- Crank balanced

- rotating assembly balanced, crank grub screwed and fitted with colar

- ACL forged pistons

- ACL bearings

- GTR Oil and water pumps

- HKS adjustable cam gears

- HKS cams, unknown model...didn't think to check before delivering to builder and he said he couldn't find a model number on them.

There are bits missing from the motor, including all the AAC gear, loom, valley and cam covers...This would be the perfect upgrade for someone that already has an RB26 that is looking for a bigger bottom end.

8.8:1 static compression (quite high for a 26/30) this was from my request during the build for better off boost driveability, I can't remember the exact combination that we used to get there, but it also included decking the block a little. Feel free to post questions, but remember it was a while ago now so my memory is a little vague

Location:

Blacktown, NSW

Contact Details:

Brad@griffonet.com

PM on this site

I'll include my mobile number to serious people

Asking Price:

Looking for offers above $6,000...feel like I'm low balling myself

Or, feel free to offer something of interest...you never know

Pick-up/Postage Arrangements:

I'm willing to transport it inside the Sydney area...but you'll owe me a beer when I get there

Link to comment
https://www.sau.com.au/forums/topic/417541-rb2630-long-motor/
Share on other sites

I'm not interested in separating, sorry.

No photos of the build, it was done by MRC Dyno Services (Castle Hill, NSW)

I've got 2 of the 3 receipts (lost the first one)

http://i225.photobuc...8may09page1.jpg

http://i225.photobuc...8may09page2.jpg

Images of the long motor

http://i225.photobuc...fsomecovers.jpg

http://i225.photobuc...ginebuilder.jpg

http://i225.photobuc...26inletside.jpg

It also comes with the throttle bodies, inlet plenum, half the loom (been hacked up, probably better thrown away)

EDIT: The harmonic balancer is from an R31 Skyline

Edited by NXGriffo

Anyone recovered from buyer's remorse after the Christmas Period? Maybe you'd like another round of spending...look no further, beef up that Skyline with a properly built 26/30, not just another slap together hybrid.

  • 4 weeks later...
  • 3 weeks later...
  • 3 weeks later...
  • 2 weeks later...
  • 2 weeks later...
  • 2 years later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nope, but they are definitely one of the default choices. Well established.
    • Has anyone used > https://performancecoating.com.au/  
    • Haha actually I did join back then under a different email address,  I couldn't re-activate my account so made a new one! I didn't post much anyway so not missing out on much. Amazing to see how the value of the cars and parts has changed over the years, also ACT section appears to be dead now. 
    • Thanks... It's in pretty good condition overall, probably due to not being drifted/tuned however being a daily driver has taken its toll. Had 100k on the clock when I got it, up to 180k now. Unfortunately it's not 100% dent free, it's got a small dent on FLH side and broken indicator from where I hit a small kangaroo at high speed. If you look at closely at pic #5 you might spot the dodgy trailer light repair my old man and I rigged up as temporary repair! - It's still there due to a combo of needing the car as daily driver and then too lazy/busy to fix properly. I've a couple of other minor accidents accidents as well but nothing major. One required a new front bar and unfortunately the smash repairer ordered the normal gtst one and not the aero bar. Needed the car back asap so just went with it, regretted ever since.
    • I can't believe that anyone is foolish enough to believe that the base maps are for any other purpose than to drive the car up onto the trailer/truck or gently creep it to the dyno. No matter how good they are, they can never be any better than the factory maps**, and only the foolish trust those on a significantly modified setup. **Yeah, yeah. I know there's also the difference between factory maps being fixed to certain injector sizes and MAP/AFM/VE relationships, and the likely aftermarket ECU base maps being better able to handle the sorts of changes that would render a stock ECU dangerous, like different sized injectors. But let's just ignore that for the moment, because the principle is still the same.  
×
×
  • Create New...