Jump to content
SAU Community

Recommended Posts

The car ain't in Balcatta, it's in Adelaide :D

I'm sure if you call the number, you'll get some fabulous story about how the seller used to be vice president of Rauh Welt in Nigeria or something, and how you need to pay for the car upfront before he can show it to you :lol:

Edited by Babalouie
  • Like 1
  • 3 months later...
  • 4 weeks later...

for someone to be able to appreciate such cars, they are most likely to have done their homework.

but to pay so much for a clone/fake/replica....?!??! :down:

What they cost here, is a function of what they cost in Japan. They're like the oldschool GT Falcons of Japan...the clones are expensive, and the genuine ones are even more ridiculously expensive :)

Real 2000GT-R Hakos would start at about $90k landed, and that would be for a car that needed some work. Real mint ones would be about $150~200k landed. What drives the value in Japan is the rarity...they're only a few hundred 2000GT-R's left.

Edited by Babalouie

In terms of availability, you can't compare the older Skylines to the 32/33/34. IIRC, Nissan made 80,000 32/33/34 GT-Rs, and so they're relatively easy to find. But back in the day, there were only 2200 Hako/Kenmeri GT-Rs made, so they're much rarer.

Also...32s and 33s are starting to get rusty already, so imagine how hard it will be to find a clean one in 20yrs time. Hakos are four decades old now, so in terms of rarity, even a non-GTR Hako is more like trying to find a 32/33/34 GT-R in 25yrs time.

And as for the genuine Hako GT-Rs, there's only a few hundred left, so those are more like finding say 400R/Z-Tune...in 25yrs time :D Needless to say, Hakos are priced accordingly in Japan.

Edited by Babalouie

What they cost here, is a function of what they cost in Japan. They're like the oldschool GT Falcons of Japan...the clones are expensive, and the genuine ones are even more ridiculously expensive :)

Real 2000GT-R Hakos would start at about $90k landed, and that would be for a car that needed some work. Real mint ones would be about $150~200k landed. What drives the value in Japan is the rarity...they're only a few hundred 2000GT-R's left.

:w00t: luckily i'm not a big fan of those... omg...$200k?????

Well the mo

:w00t: luckily i'm not a big fan of those... omg...$200k?????

Well the most exxy one I ever saw on public sale was this car, which had a Y15mil sticker on it :

JapanTrip056.jpg

It was off the chain :)

JapanTrip173.jpg

Y15mil is $170,000, so call it just a tick under $200k landed.

JapanTrip057.jpg

It's possible that ex-race cars with the right provenance, or road cars with really rare Sport Corner (ie Nismo) options might go for even more, but those sort of cars tend to change hands behind the scenes.

Like I said, to put the values of classic GT-R's in context, you have to think of what a Z-Tune would be worth in 30yrs time :)

Edited by Babalouie

^^ That is clean as!

For rare / nostalgia / originality and if you got deep pockets then yeah, go for the KPGC10.

But for $200K, that's R35 GTR Money and over...

For Super Car Performance, I'd take the R35 GTR.

^^ That is clean as!

For rare / nostalgia / originality and if you got deep pockets then yeah, go for the KPGC10.

But for $200K, that's R35 GTR Money and over...

For Super Car Performance, I'd take the R35 GTR.

I spose it's no different from foreigners coming to Oz and saying that they can get this and that car for what an XY GT Falcon costs...it costs what it costs, value for money doesn't really come into it :)

Dropping that sort of coin on a classic GT-R might be a dangerous financial thing to do tho. They may be worth that sort of money in Japan, but outside of that it might be hard to get your money back if you wanted to sell. I giess it's the same as the XY GT Falc example again...what's one of those worth in the USA or UK?

Edited by Babalouie

it costs what it costs, value for money doesn't really come into it :)

Dropping that sort of coin on a classic GT-R might be a dangerous financial thing to do tho. They may be worth that sort of money in Japan, but outside of that it might be hard to get your money back if you wanted to sell.

yeah...one man's meat is another man's poison...

I spose it's no different from foreigners coming to Oz and saying that they can get this and that car for what an XY GT Falcon costs...it costs what it costs, value for money doesn't really come into it :)

Dropping that sort of coin on a classic GT-R might be a dangerous financial thing to do tho. They may be worth that sort of money in Japan, but outside of that it might be hard to get your money back if you wanted to sell. I giess it's the same as the XY GT Falc example again...what's one of those worth in the USA or UK?

Yeah no doubt about that :)

Well the mo

Well the most exxy one I ever saw on public sale was this car, which had a Y15mil sticker on it :

JapanTrip056.jpg

It was off the chain :)

JapanTrip173.jpg

Y15mil is $170,000, so call it just a tick under $200k landed.

JapanTrip057.jpg

It's possible that ex-race cars with the right provenance, or road cars with really rare Sport Corner (ie Nismo) options might go for even more, but those sort of cars tend to change hands behind the scenes.

Like I said, to put the values of classic GT-R's in context, you have to think of what a Z-Tune would be worth in 30yrs time :)

Wow that is immaculate. An amazing find there!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Thanks Duncan! Yeah it's street use for me only. Maybe occasional track day. Any difference in noise when running with the two pumps? I would expect the lift pump to be more quiet than the main pump so hopefully not? And yes, unfortunately quite a big price difference to the simple hanger setup. Though I'm usually willing to trade money for better reliability and future-proofing. Buy once, cry once and all that. I'd be very happy to never have to deal with fuel pump / wiring issues again  
    • The old manifold was quite under the GTR strut brace.  The new manifold is quite [unknown] the GTR strut brace. The GTR strut brace was needed to clear the bonnet vents. The Old strut brace will almost certainly clear the new manifold, but not the bonnet vents. The old strut brace will almost certainly clear the new manifold, and the new bonnet without vents. But I am hoping the GTR strut brace clears the new manifold :p
    • On the bright side, at least you knew that it happened and remedied before anything happened. A friend of mine just took his Fiat 124 to a shop for an oil change and they didn't tighten the oil filter housing properly. 4.5 quarts spewed out and even after refilling + tightening the cap the engine has a tick now.
    • So, more pain. The FAST manifold is a little larger than the stocker. This is problematic because there really wasn't much clearance to begin with, so going from 'barely enough' well into 'no' is sad based on the external dimensions of the thing, even though where it bolts to the head is the same. Result is the fuel rails sit a good 25mm higher, and this is a bit of an issue with the wiring that runs behind the motor, and the fuel lines, and everything else. When pushing the manifold on, it required a huge amount of force to crush wiring looms to fit it, sensors like the MAP sensor are about 1mm from the firewall, and the FPR just has to bend ABS lines to be forced into place. After some brainstorming and some sad drinking, the loom for some reason ran from the grommet behind the ABS sensor, then to the driver side head, then back to the passenger side head. So all of this was pulled back and stripped, a few wires cut and rejoined, so that the 'branch' was now on the passenger side's head as below: Before you basically couldn't see anything behind the driver head. This is much improved! The MAP sensor is now pointing up (instead of at the firewall) Brackets have been made up for the rail. The rails are for a LS1, the manifold is designed around a LS2 as it's base. Which of course has slightly different bracketry and water pump clearance, hence the mods people need to do. Should be hopefully mounted tonight. I spent money on a new FPR that is slightly more compact than my Turbosmart FPR1200. The gauge has also been moved to the rail. There's also apparently an ORB to AN Union instead of the adapter, because the ~25mm of the current adapter is going to make the difference. Provided this all goes together and arrives today, it'll be the totally not stressful attempt to start it.
×
×
  • Create New...