Funny Size R32 / R33 Gtr Tierod End Or Hub Cone

[nissan200sx.dk]

Hi all..

I have a little problem. Can anyone confirm that my front hub is from a R33 GTR.

The cone, were the tierod ends fits measures 29mm in lenght, top diamter is about 13.4mm i diameter, and bottom diamter is about 18mm.

I have recieved some new tierod ends that should be for a R32/R33 GTR, but when tightening it down it bottoms out so much that it locks the joint. When pressing the tierod end up in the cone on the hub it is very loose.

[Duncan]

Hi mate, I am not sure how to confirm it is a 33 gtr hub...but that tie rod end looks damn small in the cone. Do you have the old one to compare?

[craigy32]

looks to me like you have one for a gts knuckle?

[nissan200sx.dk]

I do not have the old one. Am building 4x4 on my s13. There is drive shaft in the hub so must be from a gtr. The tie rod end was bought new as i did not get one with the gtr parts i bought. It was ordered to fit a r33 gtr front hubs. Yes it looks very small. Crap. Was hoping to get the car on its wheels again this week.

[nissan200sx.dk]

What are the "correct" name for those tierod ends? I need to get some new ones.

[craigy32]

yep just tie rod ends...

[nissan200sx.dk]

Thank you.