Jump to content
SAU Community

recommend me some gearbox oil

CerealKiller
 Share

Recommended Posts

pstanbis Enthusiast

pstanbis

Posted
Posted

Whatever you choose, choose well... I got given some... shall we say less than ideal.... advice on what oil to use, and after 3/4 hour pumping it in with a stupid little pump, the damn gearbox is WORSE than with the old oil in it ! i coulda thumped the guy who sold it to me if my arm wasn't so sore.... So anyway, went and saw someone else, who, rather than just saying -"Yeah this is good stuff, i use it" (silly me should've asked what in) Rang the guys who supply the oil, who actually had access to some books on this kinda thing. I guess one day ill learn not to be in a hurry. Oh Well.....

Back to the point though, i now have some Valvoline 75/85w Synthetic (i forget the fancy name) and ill let you know how it goes... bit cheaper than the redline stuff, at only $35/4litres, but I don't make huge horsepower or race or anything like that, so it should do the trick. Diff oil was just your average 90 Lim-slip stuff - no surprises there.

Also, just as an off-shoot to this question, to those of you who've used a couple of different oils, does the expensive stuff really make 70/80 bucks worth of difference? just wondering

Phil

(oh, and sorry if this is whoring, im blurry on the details of definition....) :Oops:

wannabe Proficient

wannabe

Posted
Posted

I used Castrol VMX80 also. Twas $34.95 for 4 litres.

It has made the gearbox slightly better but it is not as good as i had hoped. Still for 35 bucks and about 1 hour of work not a bad way to improve the driving feel of your car.

pstanbis Enthusiast

pstanbis

Posted
Posted

Well, after another 2 hours under the car last night, and a decent drive today, it seems the new oil (75/80 semi-synth) is MOST DEFINITELY better than the 80/90 i had earlier in the week. Still not perfect though... went back and got some Nulon Addative (PPTFe stuff) looked at the slick50, but at $45 for the treatment, and $40somthing for the oil, i may as well have got Redline, so the Nulon will do for now. Like most "miracle" cures, while it might not work, it shouldn't really do any harm. Well thats what im hoping

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      The old manifold was quite under the GTR strut brace.  The new manifold is quite [unknown] the GTR strut brace. The GTR strut brace was needed to clear the bonnet vents. The Old strut brace will almost certainly clear the new manifold, but not the bonnet vents. The old strut brace will almost certainly clear the new manifold, and the new bonnet without vents. But I am hoping the GTR strut brace clears the new manifold :p
    • The Bogan
      Mistakes were made, my R34 Story

      By The Bogan · Posted

      Bonnet clearance?
    • joshuaho96
      Magnetic Drain Plug Snapped in Half

      By joshuaho96 · Posted

      On the bright side, at least you knew that it happened and remedied before anything happened. A friend of mine just took his Fiat 124 to a shop for an oil change and they didn't tighten the oil filter housing properly. 4.5 quarts spewed out and even after refilling + tightening the cap the engine has a tick now.
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      So, more pain. The FAST manifold is a little larger than the stocker. This is problematic because there really wasn't much clearance to begin with, so going from 'barely enough' well into 'no' is sad based on the external dimensions of the thing, even though where it bolts to the head is the same. Result is the fuel rails sit a good 25mm higher, and this is a bit of an issue with the wiring that runs behind the motor, and the fuel lines, and everything else. When pushing the manifold on, it required a huge amount of force to crush wiring looms to fit it, sensors like the MAP sensor are about 1mm from the firewall, and the FPR just has to bend ABS lines to be forced into place. After some brainstorming and some sad drinking, the loom for some reason ran from the grommet behind the ABS sensor, then to the driver side head, then back to the passenger side head. So all of this was pulled back and stripped, a few wires cut and rejoined, so that the 'branch' was now on the passenger side's head as below: Before you basically couldn't see anything behind the driver head. This is much improved! The MAP sensor is now pointing up (instead of at the firewall) Brackets have been made up for the rail. The rails are for a LS1, the manifold is designed around a LS2 as it's base. Which of course has slightly different bracketry and water pump clearance, hence the mods people need to do. Should be hopefully mounted tonight. I spent money on a new FPR that is slightly more compact than my Turbosmart FPR1200. The gauge has also been moved to the rail. There's also apparently an ORB to AN Union instead of the adapter, because the ~25mm of the current adapter is going to make the difference. Provided this all goes together and arrives today, it'll be the totally not stressful attempt to start it.
    • GTSBoy
      Finding E-30 & E-85 in Sydney

      By GTSBoy · Posted

      This seems like a pointless exercise. There is no E30 availability. Ongoing availability of E85 should not be assumed. Flex-fuel is the only sensible approach, so you can use E85 when and where you can get it, 98 when that's al you can get, and anything in between as you fill it up and drain it down. And if that means replacing the pumps, fitting a flex capable sensor/ECU/whatever has to be done to these Renault shitboxen, then.....so be it?
×
×
  • Create New...