Jump to content
SAU Community

R32 Gtr Gtst Parts Stripping Car, Equips, Hks 2530's Etc


Recommended Posts

Hey guys I am located on the Gold Coast, willing to post items at cost or pick up and currently have the following for sale;

(Prices Negotiable)

R32 GTR Passenger seat Immaculate condition, with rail, all movements working perfectly $280

Also have a std R32 Gtst drivers seat laying around in good condition for $40,

post-44496-0-62648700-1354438851_thumb.jpgpost-44496-0-44898000-1354439489_thumb.jpg

polished dished Work Equips 18"x10+28 fronts, 18"x11.5+24 rears $2200 (tyres very poor)

post-44496-0-11981500-1354438815_thumb.jpgpost-44496-0-12466200-1354438830_thumb.jpgpost-44496-0-65374500-1354438835_thumb.jpgpost-44496-0-78718400-1354438841_thumb.jpg

HKS Super dragger 3.5" exhaust cat back to suit R32 chassis and twin front pipe to suit rb26dett will separate or $500ono the lot excellent condition polished cannon 5"

post-44496-0-22288700-1354438863_thumb.jpg

Momo steering wheel in perfect condition, also have an immaculate genuine horn button to fit. Steer wheel $130, Button $20 post-44496-0-95102800-1354439884_thumb.jpgpost-44496-0-94130200-1354439892_thumb.jpg

Pwr FC hand controller $300 late model pwr fc

post-44496-0-90431500-1354439852_thumb.jpg

R32 drivers door control switch board perfect condition $50

post-44496-0-85810700-1354438876_thumb.jpg

R32 GTR front left driveshaft perfect condition, good cond boots $100, also have transfer shaft from gearbox to front diff and tailshaft $100

post-44496-0-05227300-1354438291_thumb.jpg

Rb26 starter motor $60

post-44496-0-41713500-1354439327_thumb.jpg

HKS 2530's $2000 pair turbos only, done 2000kms also have oil drains, lines, std dump and manifolds etc enquire for price

post-44496-0-29139600-1354439251_thumb.jpgpost-44496-0-88160400-1354439268_thumb.jpgpost-44496-0-00615300-1354439288_thumb.jpgpost-44496-0-46621000-1354439293_thumb.jpgpost-44496-0-82637500-1354439300_thumb.jpg

Tein Coilovers to suit R32 GTR and GTS4 $750 very good condition no leaks, heavy spring rates of I think 12kg and 10 kg height adjustable go very low, and damper adjustable, have genuine spanners to suit

post-44496-0-87689600-1358738950_thumb.jpgpost-44496-0-95886400-1358739017_thumb.jpgpost-44496-0-64021400-1358739042_thumb.jpgpost-44496-0-88991600-1358739068_thumb.jpg

R32 Japanese Fibreglass front vented guards good condition $250 with mesh in vents (not cheap local made, these are durable jap guards)

post-44496-0-66397900-1354439708_thumb.jpg

SKYLINE door skirt trims great cond.$50pair

post-44496-0-01475000-1358737465_thumb.jpg

R32 skyline floor mats genuine original $60

post-44496-0-87367700-1358737514_thumb.jpg

RB26 Coil Pack loom excellent condition $100

post-44496-0-26286200-1358737486_thumb.jpg

D1 SPEC racing lightweight nuts in blue x 20 $30

post-44496-0-26328800-1358737537_thumb.jpg

Bolt on fenders 1 pair fronts and one pair rears are roughly 30mm guards with rubber trim and polished capped nuts $120

post-44496-0-18758900-1354439917_thumb.pngpost-44496-0-33412100-1358737703_thumb.jpg

R32 windscreen trim plastic piece great condition $30

post-44496-0-18085500-1358737853_thumb.jpg

R32 clutch master cylinder clean and perfect working condition $60

post-44496-0-41820000-1358737927_thumb.jpg

R32 handbrake complete, good cond. leather $60

post-44496-0-67781800-1358737972_thumb.jpg

R32 abs model master cylinder, clean great working condition $80

post-44496-0-27175100-1358738016_thumb.jpg

R32 GTR (also fit gts4) ABS module excellent condition no leaks $300

post-44496-0-83153900-1358738052_thumb.jpg

R32 'A' Pillar Trims, left and right side, excellent condition have all clips $30ea

post-44496-0-33873900-1358738137_thumb.jpg

R32 m spec fog lights (can make to suit anything) excellent condition $50

post-44496-0-00212300-1358738199_thumb.jpg

R32 Tail lights $100 pair

post-44496-0-32988000-1358738260_thumb.jpg

Bosch 023 fuel pump custom fitted to R32 fuel pump cradle and sender complete unit $140

post-44496-0-12611500-1358738291_thumb.jpg

R32 boot lid and genuine N1 lip, professionally painted and wing holes filled in $300

post-44496-0-59806100-1358738403_thumb.jpgpost-44496-0-73814400-1358741589_thumb.jpg

R32 gtst front brake rotors, pads and vented slotted discs, excellent condition pads and discs only used for 10000km $250 pair front left and right

post-44496-0-84369900-1358738428_thumb.jpg

R32 GTR front hubs and wishbone complete left and right side, $100ea

post-44496-0-35382600-1358738540_thumb.jpg

R32 gtr (will also fit gts4) gearbox crossmember $40

post-44496-0-46821700-1358738593_thumb.jpg

R32 horn and bonnet catch support $50

post-44496-0-76287700-1358738672_thumb.jpg

R32 gtr rear seatbelts pair, great cond. $60

post-44496-0-49299900-1358738691_thumb.jpg

R32 front strut brace has had part machined out to clear crossover pipe on rb20/25 $30

post-44496-0-29697200-1358738715_thumb.jpgpost-44496-0-64309700-1358738773_thumb.jpg

R32 GTR front transfer shaft, gearbox to front diff, great cond. $80

post-44496-0-37990100-1358738790_thumb.jpg

apexi turbo timer perfect working condition $20

post-44496-0-99591300-1358738880_thumb.jpg

R32 dash surround $30

post-44496-0-57797900-1358739177_thumb.jpg

Rb26 engine loom good condition from r32 late model $150

post-44496-0-29020300-1358739404_thumb.jpg

Names Johnny I would rather you call or txt, otherwise please PM, thanks

0414596256

Edited by slidinr32gtr
Link to comment
Share on other sites

  • 2 weeks later...
  • 4 weeks later...
  • 4 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Once the airbag is off, to remove the steering wheel.... Undo the 2 plugs into the clock spring, and the horn connector from it's clip. Hit the 19mm nut with a rattle gun (preferably) or if you don't' have one, you probably want an assistant to hold the wheel in place while you use a breaker bar to undo the nut Then, screw the nut back on 3 turns, and pull the wheel sharply towards you. If that doesn't work hit it medium force with a rubber mallet on either side, or possible behind if you can get there. If that all fails (it shouldn't!) you might need a steering wheel puller
    • So, to next task....the carbon fibre steering wheel was either an expensive factory option or a chinesium special. Either way, I don't like either the flat bottom or thick ring style, so it had to go So...to remove the steering wheel.... First, disconnect battery negative and stop on the brake pedal for a few seconds. Then, remove the small circular covers on each side of the wheel's rear surround to uncover the airbag clips. You need to push something like a flat bladed screw driver through, you need to push the steel clip inwards and pull the side of the airbag forward. Once you've done the easy side, same on the centre console side. You can see the tab you are shooting for circled in red Then, disconnect the horn spade connector and for the yellow airbag plug you need to get something small under the black locking tab to pop it out, then the connector releases......airbag is off  
    • @99RS4just wondering if you ever took photos of the footwell lighting / how you bypassed the controller, im keen to haver footwell lighting come on when I open the doors too   
    • Ultimately, if the tip is not far into the runner and the o-ring seals, then you are in business. Have you applied pressure to it as is? It is not really a problem for the injector to twist once it is bolted down, the oring seals it and you don't want it jambed into the oring too hard The plenum is intended to take multiple size lower injectors with different adapters, but the way you have it is fine if they seal.
    • Are these the Dmax ones you are in reference too? https://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35#description Not a bad idea to get the uni flange ones. I have sent just jap an email too. Will see what they say lmao. Only thing is the Dmax ones are on a big back order. Low key anything will be better then my OEM ones I got as they are sounding like popcorn when I go under load lmao 😂☠️🪦.
×
×
  • Create New...