Jump to content
SAU Community

Recommended Posts

http://www.r31house.co.jp/season2/used_detail2.php?car_code=310058

gtp006a.JPG

~$6,600 AUD, add skirts and a rear bumper and that'd be killer!

If you had some serious ke$h I'd be after this GTS-R though...

http://www.r31house.co.jp/season2/used_detail2.php?car_code=310051

gtsr013a.jpg

(I'm assuming the RB26 equipped GTS-X available would be a hassle importing due to the engine)

  • 2 months later...

so,any updates mate? did you decide on what you are getting?

another option,rather than DR30, have you considered early HR30 coupe? L28 bored and stroked to 3.1, lumpy cam and big carbs, and with the early model coupes at barely 1100kg ish would be a sweet ride!

  • 2 weeks later...

Been having some engine trouble with my DC2R, which more or less threw cold water on getting a sweet older ride anytime soon. Right now just saving cash so I can get it looked at and hopefully fixed, but smoke billowing out from the exhaust is never a good sign :(

Rang up Seeker and they said $3000 for a head gasket, and about $7000 to reco the engine! Damn... Seriously hoping I can get it done cheaper than that!

Still clinging to the hope that I will have enough coin by the end of the year to pick up an older ride. I was keen to get an Evo 7/8, but after riding in my friends totally worked 8MR recently, I have to say I was left a bit wanting. It didn't feel fast at all. And if it did feel mildly quick, it was in a very techno/industrial/agricultural way as is the case with most Subies/Lancers...didn't feel sporting at all. Next option is an FD RX7 to bring back home, and can get an engine rebuild here for about $2500-3000. Was thinking of getting a good and clean but higher mileage one on the cheap and freshening up the engine before bringing it back. But now with the exchange rate plummeting and the head aches of compliancing and all the other jazz that will happen with any SEVS car, the easy way out is to just pick up a modified sick older ride. I'll probably be leaving Japan end of the year, and might not be bothered with the hassle of a SEVS import, so may just do the pre-89 rule car plus my Integra.

Still keen on a two-door FJ20 DR30, an AW11 MR2 4AGZE targa-top, or even a 3.0 litre manual old-school Soarer. An '88 CA18 S13 Silvia would be nice too, but S13's are probably cheaper in Australia than Japan now these days.

Good thing about the pre-89 cars, is that the rules on having new tyres/compliancing/must be totally standard and all the other jazz they expect of SEVS cars isn't anywhere near as strict. Could bring one over with mild mods and it wouldn't be an issue. I like that.

  • 2 weeks later...

Been having some engine trouble with my DC2R, which more or less threw cold water on getting a sweet older ride anytime soon. Right now just saving cash so I can get it looked at and hopefully fixed, but smoke billowing out from the exhaust is never a good sign :(

Rang up Seeker and they said $3000 for a head gasket, and about $7000 to reco the engine! Damn... Seriously hoping I can get it done cheaper than that!

Still clinging to the hope that I will have enough coin by the end of the year to pick up an older ride. I was keen to get an Evo 7/8, but after riding in my friends totally worked 8MR recently, I have to say I was left a bit wanting. It didn't feel fast at all. And if it did feel mildly quick, it was in a very techno/industrial/agricultural way as is the case with most Subies/Lancers...didn't feel sporting at all. Next option is an FD RX7 to bring back home, and can get an engine rebuild here for about $2500-3000. Was thinking of getting a good and clean but higher mileage one on the cheap and freshening up the engine before bringing it back. But now with the exchange rate plummeting and the head aches of compliancing and all the other jazz that will happen with any SEVS car, the easy way out is to just pick up a modified sick older ride. I'll probably be leaving Japan end of the year, and might not be bothered with the hassle of a SEVS import, so may just do the pre-89 rule car plus my Integra.

Still keen on a two-door FJ20 DR30, an AW11 MR2 4AGZE targa-top, or even a 3.0 litre manual old-school Soarer. An '88 CA18 S13 Silvia would be nice too, but S13's are probably cheaper in Australia than Japan now these days.

Good thing about the pre-89 cars, is that the rules on having new tyres/compliancing/must be totally standard and all the other jazz they expect of SEVS cars isn't anywhere near as strict. Could bring one over with mild mods and it wouldn't be an issue. I like that.

Make sure you do all the paperwork properly for the personal import before it leaves, proving how long you have had car for etc, parking rental reciepts etc

Why dont you get some ae86's? theres plenty that i see on yahoo jp that could be brought back for a fair profit

Otherwise id bring a few track cars back, s15/fd/jzx100 etc

Pm me if you need container help, lands bris tho, and yards in osaka

Make sure you do all the paperwork properly for the personal import before it leaves, proving how long you have had car for etc, parking rental reciepts etc

Why dont you get some ae86's? theres plenty that i see on yahoo jp that could be brought back for a fair profit

Otherwise id bring a few track cars back, s15/fd/jzx100 etc

Pm me if you need container help, lands bris tho, and yards in osaka

Thanks mate. I'll send you a PM. Might have to see what you could help me bring in - as I could have a car complied (if its a SEVS car) in QLD, then have it brought over to WA I suppose?

Most of the AE86s here for sale are DOGS. You do see the occasional one in a not-so-sought after color/trim/bodystyle combo that is still a great condition car but nobody wants it, as they are all fanboys here looking for the clones of various D1 cars, famous manga/anime AE86s and so on.

I have the feeling that back in Australia, people wouldn't be so picky?

C130 Laurels start at around $10k, and stretch to as much as $30k. Most are around the $15k - $25k mark. Way too expensive.

Shame of the stupid pre-89 rule... I'd love a C33 Laurel.

When will this dumb rule change? I mean, these cars are 25 years old now. Surely the gov't will wake up and change this law and eventually make it pre-90, or pre-91 etc etc as the years go by. Does anybody know if this ruling will change? Or is it still going to be pre-89 only even years from now?

Will change to the 30 year rule in 2019.

When they are all rusted-out sh*tboxes that pose absolutely ZERO threat to the locally delivered Australian models (which is ostensibly the motive for the gov't to be so draconian). Hell, they are already zero threat now.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi all. I am aware there is lots of discussions about jacking points, where to lift the car and what not. But as usual just a lot of "in my opinion" and nothing definitive, and everyone does it in a different way. I want to hear from some experienced people on which points on the car it's okay/safe/recommended to lift the car using a four point hoist/lift. I will attach some images of my underbody. Sills are largely okayish, the driver side jacking point is pretty mangled though and it looks like the underfloor is slightly pushed in too, but I might be wrong. In the German Skyline forum, the consensus is to use the sidemember chassis rails in the front and the rear subframe? bushing in the rear. I know the manual says to never use the sidemember for loading but lots of folk do it and it was definitely done on my car too as they are slightly bent too. Based on the images, what points do I use to not make the already present damage worse? I'd use wood or rubber blocks to spread the load across a bigger area of course. Driver side sidemember and jacking point mangled one) https://imgur.com/a/eKjzrJX Driver side rear jacking point https://imgur.com/a/W3DWF1P Passenger side sidemember and jacking point https://imgur.com/a/65UvIJe Passenger side rear jacking point https://imgur.com/a/h3k7j53 We can also see some underbody rust but so far it all looks somewhat treatable and nothing that requires a Yoshida style restoration.
    • Have you put an aftermarket oil pressure gauge on and verified your oil pressure?   Noise being on the block, on exhaust side, how high up the block does it seem to be? It could be the VCT system getting cranky, especially if it's mainly at idle, and when warm, as that'll be your lowest point for oil pressure. Could be showing that oil passages / VCT solenoid are blocking.
    • Well, hydraulic lifters will get noisy if they are dirty/fouled in some way, and exactly how that manifests will depend on exactly what schmutz is where. There is a procedure on here somewhere for dismantling and soaking/cleaning them. Replacing them with new is about 50% of the work and about 5% of the money!
    • Thanks for the reply @GTSBoy this is is a hydraulic lifter engine. Yea right i did not realise the lifters were supposed to be compressible while installed. I could push them down but i had to lean almost my while body weight on them.  I have never heard of a lifter/ lifters ticking only at hot idle and getting worse the hotter it gets. I have owned a few jdm cars with noisy lifters. This noise is slightly more subtle, it is more of a sharp gentle metalic tic than the solid and more loud tapping I've heard on lifters. I have used a metal rod, alloy tube, hose and stethoscope and could not find the source of the tick. But it appears to be loudest on the actual engine block behind the exhaust cam gear and next to the oil filter. I had mate (40 year old mechanic) go over it with me and he couldn't find it either..  Could it be a cam seal issue of some sort?  Cheers  
×
×
  • Create New...