Jump to content
SAU Community

Recommended Posts

  • Replies 42
  • Created
  • Last Reply

Top Posters In This Topic

hey Munky, if you wanna have a fast car just but a GTT.

if you want to have something differnt and have handling and a bit of "power", get good brakes,susp,rb30 bottom end and all the other things the others where sayin.

but if you dont car if your car is N/A or Forced incudtioned, then why not go the cheaper/better way and go turbo?

have a good think about all the things we have been offering you ( advice ).

Yeh DK I can appreciate your opinion, but the whole point is, I'm not allowed to get a turbo. Insurance would most likely double again, and my parents wouldnt want me in a turbo.

Oh , now i understand, your parents bought you the car so you gotta .. yehp i get you...

well looks like N/A is the go for you till you can get a turbo after your off your P's

Hey Munky - Ive got a 34GT. I used to own a stock S2 R33GTST. Mate obviously the R33 was faster because it was turbo but with all due respect my GT is not that much slower. I dont know if its just the newer NEO engine or just the fact that the GT is lighter, but with a full exhaust, pod, extractors, SAFC and lightweight wheels a R34 GT is quite a quick car.

When my old S2 got stolen, my increase in insurance made it more sensible for me to get a non turbo car, hence the R34GT.

Dont go overboard with the performance side of things because honestly unless u dont care about resale value a turbocharged GT will commandeer less than a GTT.

You're 19 enjoy the line and do a few mods and just learn to love the car.

Im pretty sure i saw your car once when i drove past the dealer u bought it from, looked really nice and clean in white.

well that's around the budget I'm looking at... so here goes

purchase n ship RB25DET from japan, $2000

sell RB20DE - $800 (hypothetically)

TD06 + manifold, wastegate n all the other plumbing bought and shipped from japan - $1800

Hybrid Intercooler - $600 (mates rates)

Exhaust - $800

Power FC $1000

R32 and R33 japanese service manuals - $100

Doing all the work myself - Priceless

Total - $5500

Not too shabby, dunno what power to expect, looking at maybe 230kw

  • 1 month later...
  • 4 weeks later...

can anyone answer this one for me??

if you add a turbo to an engine that was n/a from the factory do you need to lower the compression ratio? if so what is involved in this?

I know 666 dan has said that he is running his with stock compression and i think i read you said about 7psi of boost. is this 7psi the max you could safely get without lowering the compression?

do you need new pistons to lower the compression?

I have a friend who made over 200rwhp out of an rb30na but he stuffed around for years... The headwork was a piece of artwork - I drove the car once - and was more impressed with my ca18det silvia! All I did to it was get a friend to write a chip, 14 psi boost, dump pipe and exhaust. Trust me, I hotted up a red metor once, then dad and I installed a rb20 det after disappointment. I know a rb25 is streets afead of a red moter 202 - but then again a turbo in my opinion is a good step up again.... 200rwkw isn't so impressive after a few weeks - you just get use to it

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I have a heap that i have collected if you want some authentic ones still. Pm me if your interested!
    • Hey lads, reviving an old thread.  As an update, since the last time replied to this thread, ive done mostly suspension. Havent touched the motor except for maintenance. Though upon changing spark plugs, found out i had splitfires pre-installed! Updates: - Got me some stock airbox top cover and snorkel to fit onto the original intake. Should be free of defects - Bought a set of R34 GT-T brakes (not installed yet, going to rebuild + respray in champion blue + white 'Nissan' text) - Bought the last set of bilsteins from @Sydneykid and had them installed. Has been making some sounds on the rear but hopefully should be sorted out after this New Year break. - Regreased front caster rod bushings (poly bushes..) - Rear upper camber arms - Whiteline sway bars (BNF27Z 22mm + BNR11XXZ 24mm).  The rear sway bars are a bit short (ive read 50mm else where) but was still able to get them in.  Anyhows, I reckon suspension is sorted now. Maybe replace bushes (do have a set of front upper control arms from SK not installed yet) but should be okay for now. From now, I'm wanting to start working on the motor, drivetrain etc etc. Still debating on the order to go on and what to buy etc but: - ECU ( Haltech or Link ( Link states that it dont support A/T or AWD functions... Can anyone attest to this? ) - Highflow turbo ( ATR43ss2 ) - Intercooler ( Not decided yet, but cant find many good afoordable ones. Toshi says to opt for crossflow Japanese. Bit difficult this one, unless I get a returnflow Blitz from JJ? ) - Injectors ( Any recommendations ? I do have a nismo FPR ( Thanks SK ) ) - Seats - Tune by either Toshi or DVS To be fair, I did consider just keeping the stock turbo and nistuning it. Sat in a mates stock N, that had something like 200kw, and I reckon that felt more than enough. Maybe I should just go this route ahhaha. Too many choices.... Planning a trip down south, so wanting to just clean things up and make sure it gets to and from in one piece. Anything else specifically I should do before ? Cheers lads  
    • Must be for the car’s lucky charm 🤷🏽‍♂️ She runs fine, but it just seems to take about 1L less. Maybe I’ll have the oil sump dropped at some point to check if there is anything 
×
×
  • Create New...