Jump to content
SAU Community

Recommended Posts

  • Replies 42
  • Created
  • Last Reply

Top Posters In This Topic

hey Munky, if you wanna have a fast car just but a GTT.

if you want to have something differnt and have handling and a bit of "power", get good brakes,susp,rb30 bottom end and all the other things the others where sayin.

but if you dont car if your car is N/A or Forced incudtioned, then why not go the cheaper/better way and go turbo?

have a good think about all the things we have been offering you ( advice ).

Yeh DK I can appreciate your opinion, but the whole point is, I'm not allowed to get a turbo. Insurance would most likely double again, and my parents wouldnt want me in a turbo.

Oh , now i understand, your parents bought you the car so you gotta .. yehp i get you...

well looks like N/A is the go for you till you can get a turbo after your off your P's

Hey Munky - Ive got a 34GT. I used to own a stock S2 R33GTST. Mate obviously the R33 was faster because it was turbo but with all due respect my GT is not that much slower. I dont know if its just the newer NEO engine or just the fact that the GT is lighter, but with a full exhaust, pod, extractors, SAFC and lightweight wheels a R34 GT is quite a quick car.

When my old S2 got stolen, my increase in insurance made it more sensible for me to get a non turbo car, hence the R34GT.

Dont go overboard with the performance side of things because honestly unless u dont care about resale value a turbocharged GT will commandeer less than a GTT.

You're 19 enjoy the line and do a few mods and just learn to love the car.

Im pretty sure i saw your car once when i drove past the dealer u bought it from, looked really nice and clean in white.

well that's around the budget I'm looking at... so here goes

purchase n ship RB25DET from japan, $2000

sell RB20DE - $800 (hypothetically)

TD06 + manifold, wastegate n all the other plumbing bought and shipped from japan - $1800

Hybrid Intercooler - $600 (mates rates)

Exhaust - $800

Power FC $1000

R32 and R33 japanese service manuals - $100

Doing all the work myself - Priceless

Total - $5500

Not too shabby, dunno what power to expect, looking at maybe 230kw

  • 1 month later...
  • 4 weeks later...

can anyone answer this one for me??

if you add a turbo to an engine that was n/a from the factory do you need to lower the compression ratio? if so what is involved in this?

I know 666 dan has said that he is running his with stock compression and i think i read you said about 7psi of boost. is this 7psi the max you could safely get without lowering the compression?

do you need new pistons to lower the compression?

I have a friend who made over 200rwhp out of an rb30na but he stuffed around for years... The headwork was a piece of artwork - I drove the car once - and was more impressed with my ca18det silvia! All I did to it was get a friend to write a chip, 14 psi boost, dump pipe and exhaust. Trust me, I hotted up a red metor once, then dad and I installed a rb20 det after disappointment. I know a rb25 is streets afead of a red moter 202 - but then again a turbo in my opinion is a good step up again.... 200rwkw isn't so impressive after a few weeks - you just get use to it

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • There's a huge reason manufacturers are tuning in dead flat torque curves... Make them reliable (and more drive able)
    • What HVAC actuator is under the steering wheel? Do you mean on the RHS of the centre console, immediately to the left of your shin? If so, then yes, it is probably that one, because that is the mode door actuator, and from what I know, it's still a pain in the arse to replace. I don't know about whole dash out, but you certainly have to rip into the centre console section. I don't know if it's covered in the workshop manual, as I haven't spent much time looking at those parts of it. (and by "the workshop manual, I mean the R32 GTR one, which is the most comprehensive one we have, and it should be similar enough between that and later cars to serve as a guide).
    • ...oops. forgot the TCU end...
    • No I got mine from a friend that had fabricated one … but I had to fit it to my setup which was a hks turbo setup. His was a Garrett -7. So one of my turbos was not a flange for one side … then I had a leak in the welds I had to find a weld shut … in the end the setup was decent priced but I spent a lot to get it fitted. A couple companies I checked would make it but you’re talking 7-9k aud with titanium. No joke mine was 6-7k even second hand after I had to fit it in Hong Kong … labour is expensive here. 
    • I'd just like to restate that I don't think anyone here is actually hating I recently sold a car part to a guy who was building a forged auto R34, with MV stall and aiming at ~450kw. I told him that I'm him, from the future and to stop after it explodes once. I told him I knew he won't listen the first time, and that's fine. But if my predictions do come true - Change direction faster than I did. I also said it's probably no coincidence that the dyno plot of a reliable turbo engine starts to look a lot like a N/A motor. :p
×
×
  • Create New...