Rb26 Waste Gate Vaccum Hard Line Replacement

[AnDreeZy]

Ive stripped the bolt on the waste gate vaccum line that runs behind the engine to above the manifolds and the turbo water lines.

I was wondering if I could replace this with an AN fitting? That would connect to vacuum lines for the waste gates and boost controller, and cable tie the o2 sensor wiring to it with a bracket?

I've never seen this done before

What other ways of replacing this vacuum line is there? Help would be much appreciated

[Piggaz]

Done it myself. All those crappy hard lines are gone. Just weld a -6 fitting onto the metal line and run a hose around the back of the head. I'll take some pictures tomorrow if I remember.