Jump to content
SAU Community

R33 S2 No Power Windows, Sunroof Or Instrument Cluster.

msmith

By msmith,
in General Maintenance

 Share

Recommended Posts

msmith Apprentice

msmith

Posted
Posted (edited)

Hi SAU,

I'm having some issues with my 1996 R33 S2 GTS25T. I was driving last night and lost my instrument cluster, lights remained but no water temp, speedo, tach, oil pressure. I pulled over and checked fuses and replaced the 10A meters fuse under the dash. This did not resolve the issue. Decided to head home and fix it there. When i got home my drivers side power window would not go up. This morning thinking they could possibly be seperate issues i pulled the door card and cleaned the power window switch. Again this didnt solve the issue. I decided to try to sunroof, no go.

So far i have:

Cleaned power window switch

Checked power window switch fuse 25A in engine bay and swap with rad fan 25A, Also checked with ohm meter reading of 0 ohms

Checked all fuses in dash fuse box

Checked IGN fuse in boot

Reseat all relays in dash fuse box

Connected battery to power window motor, just so its not down when QLD decides to floor again

I have read many threads but havnt been able to find one with similar issues, Most are either the S1 power window relay dying or dry solder joints on the back of the tach.

Any ideas?

Edited by msmith
msmith Apprentice

msmith

Posted
  • Author
Posted

Where are the earths located?

I have tested the main fuse, all ok there.

Power aerial doesnt work either.

I have 12 volts at the power windows fuse in the engine bay with the ign in the on position.

Does anyone have a wiring diagram for the body?

  • 8 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • PLYNX
      Short shifter r34

      By PLYNX · Posted

      Don't do it if your gearbox box has already having syncro issues. The short hifter will put a greater load on them. If you must I remember Nismo did a shorter shifter, with the top part being physically shorter and the part that went into the gearbox was the same as stock. In saying that I've had a C's short shifter (I think) in mine for many years, which was given to me as the previous owner was not sympathetic to the gearbox. Thus forwarned I was careful and had to modify my normal changing style. You have to be super accurate with your clutch and shifts
    • CRSKmD
      R32 Sedan - Grip and Drift (have my cake and eat it too build)

      By CRSKmD · Posted

      Well, after a week of daily driving and having to crawl out between the wheel and the side intrusion bars. I got myself a quick release setup. I went with an NRG short hub and Quick Release with some cute heart cutouts on the pull tabs. Nice and matchy matchy with the rest of the interior accents I have going on.  The only downside is the total stack height even with the short adapter is longer than the old HKB boss kit. Luckily I had some adjustment left on the column so move the wheel away.
    • robbo_rb180
      Short shifter r34

      By robbo_rb180 · Posted

      stock shifter with new bushes, springs and cup will improve it. Gktech do all the bits. The opinion as the years have gone on is the redline is not great in old gearboxes.
    • drifter17a
      Short shifter r34

      By drifter17a · Posted

      Hi all   what short shifter do you use on your skykine r34?   my synchronous does have a problem and i was getting huge delay and grinding sound between 2nd and 3rd, did put shockproof red heavy stuff and it is great now/ no issues   would in your view short shifter screw this up?   people seems to suggest/ use cube short shifter and there is standard and premium. Seen review of premium as much better and less play. Thoughts?
    • GTSBoy
      R34 oil and timing belt change

      By GTSBoy · Posted

      Yeah, there's a bit of a density and friability difference between pebbles and any of those other things. Silicone will definitely float in oil and so will be mobile enough to move around. Although, again, if it is upstream of the filter it really shouldn't go any further. I would only ever worry about silicone when it is in places downstream of the filter. Upstream of the pickup is a whole 'nother matter. We've all seen what that does. I have seen the most abominable crap settled out in industrial gearboxes, trunnion lube systems and the like, without any sign that any of it has touched anything in the machine. Just chilling in the bottom, waiting for the inevitable operator error that causes the whole machine to need to be dismantled for repairs.
×
×
  • Create New...