Jump to content
SAU Community

Recommended Posts

_DSC0410_zps85bd3ce5.jpg

_DSC0411_zps0f777a92.jpg

_DSC0412_zps9b165f35.jpg

_DSC0413_zps8cc7d405.jpg

_DSC0414_zpse5d8b8a3.jpg

_DSC0415_zpsef9bf921.jpg

_DSC0416_zps0763aa52.jpg

_DSC0417_zps5c8c9071.jpg

_DSC0418_zpsfa730440.jpg

Selling my mates rims off his 2000 WRX

Not quite sure what wheels these are, I do however know they are made in Japan, so rest assured they a quality made wheels

Suit nissans/early model wrx's and cars with a 5 x 100/114.3 PCD

Offset is +40

Wheels in good condition, some gutter rash as expected, not a lot however (see photos)

Tyres are 215/45/17 Good Year Eagle F1's all around, on on just above indicator (see photos)

$500

Item located S.E Subrubs Victoria

pm or text me zero433950285

Phil

Edited by philmak

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Get a timing light on it and verify it's sparking reliably at a sane ignition timing. Use a COP extension lead to be 100% sure about timing instead of hoping that the timing loop on the back of the engine is accurate. Make sure it's actually injecting fuel. MAF is not used on the stock ECUs for initial cranking.
    • RE5R01A is the transmission. Didn't realize they had a 5 speed for the NA cars but for some reason the turbo engines stuck to 4 speeds. Looks like the solenoid block is still available from Nissan directly at a somewhat reasonable price: 31940-60X01 https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/skyline/er33/6568-rb25de/trans/317 I would move sooner on this than later. The moment the de minimis exception for Japan goes away expect to be paying 25% tariffs even for stuff like this.
    • Only RB26 are low from factory. And even then the ECU actually want high impedance, because it's essentially the same ECU as the RB20 anyway, and thus they have a f**king resistor pack!
    • Is this preventable by priming the system with external oil pressure? I've seen the speed academy folks hook up an external oil priming system to the oil pressure sensor port with an air compressor to check for oil leaks before putting an engine back in a car. Something like this: https://www.jegs.com/i/JEGS/555/23550/10002/-1?gPromoCode=SPRINGINTOSPEED_APR25_5Off&gQT=1
×
×
  • Create New...