Jump to content
SAU Community

Recommended Posts

hi all,, i have a 1990 r32 gtr, purchased with most of mods done by previous owner. when i brought the car i was told it was running 290atwkw on 17psi, with mods, which include, r34 gtr N1 turbos, hks cam gears, sard 800cc fuel rail, injectors to suit, walbro fuel pump, apexi pods, hks to intercooler plumbing and blow off valves, stock intercooler, ally radiator, has a full stainless apexi exhaust, and that all i can think of from memory.

i recently had the car in for some other work,minor stuff. but also got the car tuned to run e85, it came back running 294.9atwkw, at around 23psi

i qustioned the previous owner and he swears black and blue that it made 290kw when he owned it.

is this an average amount of power for mods and e85,

or is there something wrong with the car where its lost power, but ifso i thought the tuner would be able to pick up on this?

any help or thoughts would be great cheers. :yes:

Link to comment
https://www.sau.com.au/forums/topic/418826-right-power-for-mods/
Share on other sites

hey sorry forget to add, it was tuned at the same place. but when i got it tuned on e85 it was in rwd as im having problems with front drivshaft. i did ask them to put fuse in for tune,,, but they didnt lol. when it was tuned the first time with previous owner it was in 4wd. both on same dyno from same place. im just abit confused..

no i didnt, because i just thought the previous owner must have bullshitted me. but i just spoke to im and he swears it made 290kw, im waiting on a pic of dyno slip. not sure anout injectors being maxed it has sard 800cc, didnt think they would be?

E85 is not a promised top end power increase, there are factors involved.

I bet you are not running 23psi @ 8000rpm, -7s (R34 N1s) and -9s (GT-SS) in just about every graph I have seen, fall over above 7000rpm to around 18psi by 8000rpm give/take as they are simply small turbos. Hence why they are so responsive.

The only user that's claimed a good 40rwkw gain (with 5-6psi), hasn't come close to running a MPH that remotely backs that up, jury is still out on that one :)

Splitting hairs - You'd probably expect to be around 300-320rwkw, but i say near enough - and check the midrange. That's where you should be looking on -7s/-9s

thanks for your input.. the dyno graph i have really doesnt show much, its a real basic graph. not really happy with that either, im more than happy with the power it has. just was confused abit and wasnt sure if the car could have lost power somewhere along the line, cheers

:yes:

You could check the exhaust for a restriction, make sure it doesn't have any in-built restrictors (lots of Jap exhausts have 2.5" restrictors before mufflers, internally).

Otherwise try get the old graph and the new one overlaid. That'd give you a good idea as well.

But definately get a boost read out, i would be surprised if there is 23psi above 7500rpm

Ah and have a look @ that - 18psi in the top end :merli:

Although it was never running 23psi mate - It only gets to 20psi and immediately falls. It should hold 20psi a bit longer before it falls over IMO. Which would give you a meatier mid range.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Anyone want to make me an offer to take my v36/g37 3.7l manual coupe in full? Off memory it was low 100k km but the battery is flat so can't tell right now. What's wrong. I had engine problem's that led to a nice clunk. It made it home but it wasn't pretty for the last few kms. Happened under revs. Sounds like bottom end.. never got around to fully checking or fixing it so the car has sat still and unregistered for a few years. Minor bump in front end set the pedestrian protection under bonnet airbag off and that was meant to be repaired, but while waiting for the repair (parts to come) I got the engine problem. The rest of the car is in decent condition. All drive line is good. All interior is good. Leather interior. Wheels in good condition and decent tyres although the ps4s are likely a little too old now it's sat still. Colour of the car is pewter off memory, the dark grey colour. In Camden NSW. Would need a tray back pickup.
    • Anyone want to make me an offer to take my v36/g37 3.7l manual coupe in full? Off memory it was low 100k km but the battery is flat so can't tell right now. What's wrong. I had engine problem's that led to a nice clunk. It made it home but it wasn't pretty for the last few kms. Happened under revs. Sounds like bottom end.. never got around to fully checking or fixing it so the car has sat still and unregistered for a few years. Minor bump in front end set the pedestrian protection under bonnet airbag off and that was meant to be repaired, but while waiting for the repair (parts to come) I got the engine problem. The rest of the car is in decent condition. All drive line is good. All interior is good. Leather interior. Wheels in good condition and decent tyres although the ps4s are likely a little too old now it's sat still. Colour of the car is pewter off memory, the dark grey colour. In Camden NSW. Would need a tray back pickup.
    • I started with the above in my head too, and I might be reading / thinking about what they want wrong, which is why I complicated it a bit further. Purpose I'm seeing is for the corner indicator to be on with headlights, and then if the indicator turns on it can still flash. The relay part above I can see working as required, except in the case of headlight is on, and indicator is on. The change over relay you've wired in would get signal from the indicator, and as it flashes would give power to the globe from the indicator, but as it flashes off, power comes from the headlight, which would cause the indicator to be constantly on when headlight is on, even while indicator change over is flashing. That is unless we don't care if it flashes or not if the headlight is on? I guess that's an OP clarification.
    • HI, Ive got an r34 gtt sedan A/T. The instrument cluster went out and I replaced it with another A/T everything visually looks the same and all the gauges work now with the exception of the speedometer and odometer. The speedo will stay pinned at zero until I'm going about 55kmh and then it'll say Im going about 5kmh. my odometer seems to be tracking at about a 1/10 of what it should. If I go 1km it'll say I've only gone 0.01. Appreciate any and all help. Ive tried searching through the forums reddit and a local fb group. The only info I think I've found is that some cars didnt come equipped with TCS (mind is) and the clusters may be different between those? I've also installed a brand new VSS and no joy obviously. TIA. 
    • what speedo healer did you use?  
×
×
  • Create New...