Jump to content
SAU Community

Expression Of Interest 17" Wheels & Tyres R33

Ricky_Bobby
 Share

Recommended Posts

Ricky_Bobby Enthusiast

Ricky_Bobby

Posted
Posted

Hey Guys,

Just seeing if there is any interest in Adelaide for my ROH Boost R 17" Black rims, they have good tyres with probably over 80% tread.

I will get pics up tonight and confirm what they are.

I also have a set (brand new still with stickers) of Pirelli P6 17" , pretty sure they are a 245 profile ? (once again will confirm tonight and provide pictures)

I will be looking for something alot wider , probably deep dish JDM look ....

Edit (Just realised you cant to EOI) , I was hoping to try and get about $1400-$1500 for the lot or about $800 for the wheels and tyres and then about $700 for the Pirelli's..

Ricky_Bobby Enthusiast

Ricky_Bobby

Posted
  • Author
Posted

okay so the tyres are actually Pirelli P7's and are 215/55 r17 94v http://www.collierautosport.net.au/forsale/tyres.jpg , I am after $600 for these Pirelli's which ends up $150 a corner, pretty good for Pirelli's huh ?

Then the rims are in pretty good knick, the car is parked in a akward spot so I could only grab a picture of one of the rims tonight (will update with more) but the two front have Altimax HP 215/45 r17's and the rears have Rapid p609 215/45 r17 with about 85% tread on the both . One of the rims pictured http://www.collierautosport.net.au/forsale/Rim.jpg . I am after $800 for the wheels as the tread on them is almost new and there is barely any gutter rash on these rims at all .

PM if your keen, I am interested in grabbing some cheap stockies if anybody is getting rid of some so the car has something to sit on if you buy the rims.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • r34lad
      r34 starting problem

      By r34lad 路 Posted

      https://www.efisolutions.com.au/coolant-temperature-sensor-bosch-180sx-s14-s15-r33?gad_source=1&gclid=CjwKCAjwzMi_BhACEiwAX4YZUHsCQhbiDT_NC3q5wD9jrzH6Dts9eGSr19NXSDw7x9WVm1sH7G3S4hoCwaUQAvD_BwE this is the one i replaced today
    • r34lad
      r34 starting problem

      By r34lad 路 Posted

      I have replaced the larger coolant temp sensor, i do see a smaller one next to it (looks to be just 1 pin) but i assume that is just for the dash? or should i replace that aswell?
    • dbm7
      r34 starting problem

      By dbm7 路 Posted

      Check coolant temp sensor ~ symptoms fit the hard hot start/cold start OK scenario --- if sensor goes open circuit, ECU thinks engine is cold and enriches mixture ....works when engine cold, but floods them with rich mixture when hot (Hyundi MAP engines are a bit infamous for this)...
    • Duncan
      Neil's R33 Gts-t Build

      By Duncan 路 Posted

      OK, starter changed for a spare without much trouble. Neil had kindly left space to get to the top starter motor bolt from above with a long spanner which makes the whole deal much easier, and everything else was neat and easy to get at from underneath. Once the starter was changed everything was good, unplugged the CAS and turned the motor on the starter to make sure everything was free and happy. Onto properly priming the oil and first start. I'd picked up one of these oil prime kit from Boost doc a while back and this was my first time using it.  https://boostdoc.com.au/products/engine-oil-prime-kit?_pos=1&_sid=28c628a65&_ss=r While I'd organised all the fittings to hook it up to my GTR (sump plug to -6 feed and -4 T to tap it in and retain the oil pressure gauge, neither suited on this car as the oil pressure needs to T into 1/8 NPT not -4 and the Aeropro sump has some massive drainplug not that factory whatever it is. So, waiting for a couple of fittings, then I'll prime it and do first start, hopefully next weekend. Other than that going well, there is very little stopping a final alignment, tune then shakedown day
    • r34lad
      r34 starting problem

      By r34lad 路 Posted

      Also to mention, i just tested the CAS, seems to be working fine, can hear the pulses inbetween 0 and 180 degrees, another mention aswell, when i let the car sit for about a hour today, i went to start it and it almost fired on first crank, then just completely struggled. Could it possibly be blocked injectors?, maybe allowing a little bit of fuel to seep past allowing it it almost start first crank?
脳
脳
  • Create New...