New Fmic

[gts25tnissan]

Hey all i bought a greddy front mount of a guy at a good price came with everything apart from the hoses for the pipes the pipe size is 2.5 or around 6cm and the cooler its self is just under 3 or around 7cm

1. Were to buy the hoses i don't think super cheap sell that odd size hoses theres looks bigger or smaller

2. I read on here some one talking about the hot side of the cooler needs thicker hoses.

3. I read on here also to clean it with petrol and i did but it didn't say anything about flushing it out do i just let it dry or run hot water through.

Thanks guys tryn to get my head around this

Edited January 31, 2013 by gts25tnissan

[Tangles]

Get the silicone joiners off ebay, you can buy reducers too (3" to 2.5"). Buy a good 3-ply or 4-ply set.

Hot side doesnt need thicker silicone if you get the good stuff to begin with.

ie pictured is 3-ply - http://www.ebay.com.au/itm/Silicon-Silicone-3-to-2-5-Inch-ID-Straight-Reducer-/200431436892?pt=AU_Car_Parts_Accessories&hash=item2eaaa5045c

Flush with a 50/50% mix of metho & kerosene, do it a few times (tape up one end), then flush out with rain or distilled water. let dry over night.

Good luck with the install.