Jump to content
SAU Community

Recommended Posts

2 minutes ago, mr_rbman said:

you don't get any attessa issues running the wheel and tyre combo you do?!

 

Nope. I run the same size all round.

I have 2 sets of wheels

1st set   : Volk TE37 17x9” +0 Gloss Black – Falken RT615 : 255/40/17 (these wheels came with the car)

2nd set :  Volk TE37 18x9.5 +12 Satin Black – Yokohama AD08R 265/35/18

Was starting to get worried as everything was running so well.

Drove the car to work and back during a couple of high 30 degree days and on the way back on the second day, noticed a foul smell from the engine bay, in stop/start traffic.
Got home and couldn't figure out where it was coming from. Thought great, somethings curled up and died in there.

Noticed some strange corrosive spray marks around the battery and I found this - sealed battery is not so sealed anymore.
IMG_2572_zpsn5o1wn5p.jpg
Managed to spill acid everywhere while I was trying to take it out.

Acid has eaten away at the paint underneath and new black silicone hoses and marked the hard pipes. Great.
IMG_2573_zpstnyhnfra.jpg

 

Quite possibly overcharging due to regulator issue but PFC said 14.1V 
Could also possibly have been the battery

 

 

Cleaned up as much as possible with water. Will need to sand back the exposed metal and re-paint.
IMG_2576_zpslkilebp7.jpg

 

What sort of battery to get next? No use keeping the battery here, in the engine bay.
Looks like there's a new project coming....

That battery wasn't sealed to begin with, i would recommend a Optima Yellow or Red Top battery, they are fantastic, better power per size then most batteries on the market, and completely sealed, you could install it upside down if you really wanted to.

  • Like 2
13 minutes ago, Coullsy said:

That battery wasn't sealed to begin with, i would recommend a Optima Yellow or Red Top battery, they are fantastic, better power per size then most batteries on the market, and completely sealed, you could install it upside down if you really wanted to.

Ah ok.
I've tilted the battery before and it hasn't spilled, previously. Accord to Century they are sealed? http://www.centurybatteries.com.au/products/sealed-maintenance-free

Cool, thanks I'll take a look at those. Was also looking at Odyssey AGM's.
Will need to sort out details on the battery relocation.

Just get a full river sealed battery, have had much better run with them than oddesy or optima junk.

Find out what model Chris fits to them, not expensive either.

http://www.rjbatt.com.au/fullriver-hc-battery-range/

  • Like 1
21 minutes ago, RBN1 said:

Ah ok.
I've tilted the battery before and it hasn't spilled, previously. Accord to Century they are sealed? http://www.centurybatteries.com.au/products/sealed-maintenance-free

Cool, thanks I'll take a look at those. Was also looking at Odyssey AGM's.
Will need to sort out details on the battery relocation.

The plastic underneath the long sticker is a lid, on the back up the top you will find 2 x screwdriver slots to pop it up and the caps are under there. The new range of Century's batteries have gone maint. free

Odyssey are great batteries also, all comes down to your budget.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Getting Dangerously close to being ready to go back in the car. Rockers in with clearance castings now (and a quick check with the USA for the torque settings for the larger custom bolts) Covers and ported FAST Manifold sitting on there. Not fully tightened down as there's some clearancing required for the water pump with the earlier LS1 water pump styles. Example of the clearancing needing to be done: The body has to be ground a little but I'm struggling finding an actual piece of it. The later variant of water pump resolves the issue as the manifold was designed around it. It only came on the VZ LS1 in Australia, it got a different pulley for Gen4 motors. (it also costs $450... vs... $0).
    • https://files.fm/f/5atwkuvcjd
    • Doing some height adjustment on front suspension on a v35 and noticed this. The passenger side looks correct. So wondering what's happened to the drivers side?
    • Oh...I have the electric mirrors as well iirc ...they're in the same state as just about every other R31 door mirrors, with the 3 plastic screw towers broken/cracked in the plastic molding. All the interior is 'dry', so the mirror switches etc likely all work fine. Some pics below of the trimmer pieces ~ looks to me like previous owner, painted chrome finished trims with black paint ...ergo, the chrome underneath is likely a-ok... ...starts to look yukky posting stuff like this, how much did it cost in fuel on your last sortie up this way?...me just thinking aloud, borrow someone else's 4cyl to cut costs, come do your own pick'n'pull like before to save me some bother...hehe.. but whatever, I'll just earmark bits I know you want, because the way this is all panning out, I'll be able to retire the R31 from daily duty at long last, replacing it with a Subaru wagon I'm lining up in the wings...ergo, my attitude towards the donor pinny shell is starting to wane a bit, and I'm more than happy to help you out there... Like you say though, no rush...and I'll guarantee we won't be moving too far from this locale at any rate 😎
    • Cool, I’m just down Sydney today. Not much time to get online.
×
×
  • Create New...