Jump to content
SAU Community

Recommended Posts

Hi guys I need a little help, I have spent hours searching here and other forums (albeit via I phone) my new engine is a built rb26 cams e 85 - 5s etc and I've let myself get into a race with a 520 kw r35 ( which I will probably loose lol ) so in thinking cause nos is so cheap it might make it less embarrassing. So I came across the horror stories but is anyone using it? How is it mounted? I have 2 old d jetro ports I'm not using is that an option direct into the manifold? I've seen ppl plumb it before the tb but not in rb26 it's a genuine nos wet kit and I'm thinking a 50 or 75 hp shot will be enough. I'm after advice on how to do it correctly not dont do it get bigger turbos etc ive already spent a small countries GDP so something under a grand is a great option to get past the bank manager aka wife

Scott

Link to comment
https://www.sau.com.au/forums/topic/419163-built-rb26-and-nos/
Share on other sites

it will need to be in the cooler pipe just pre plenum as its a wet kit and need as much help with distribution as possible, 75hp will be super reliable if set right. make sure it has a min rpm setting (to stop blowing back) and only activates on full throttle and via push button.

tell harry you need 2 of the big ones.

by tonight....

but srsly, will keep an eye on this.

do your injectors have enough left in them to run a dry setup?

and does your fuel system have enough in it to run it in the first place?

maybe squeeze up to a 100 shot?

2000cc injectors and walbro 460 e85 pump I will know more when it goes on the dyno I'm looking at a few different nos systems in regards to transmission it's Gtr five speed but as long as it holds together I know from experience I can best a 35 off the line

So a dry system runs inline with fuel system and wet just sprays nos in and hopes for best with fuel system ? Wet is much cheaper but the w.o.n kits look nice with lots of control etc

You have it around the wrong way And wrong...

You'r not going to get a well set up and reliable nitrous kit, installed and running under 1k.

The cheapest way to go would be to buy a nitrous express wet kit. Buy a bottle warmer that is controlled with an inline pressure switch. Buy an msd rpm window switch.

.... then take the whole lot to a workshop that knows what they're doing with imports and nitrous. that's not many workshops in Aus.

Have it activate at wot over 4k rpm... don't install any buttons for activation, it's confusing when your doing 200km/h.

For a single point of injection, limit the shot to 75hp... and 'aim' the stream towards the back runner from the start of the intake plenum.

You'll have to use bigger than recommended fuel jets with e85... and don't tune it using afr meters only. Nitrous will give false oxygen mix readings and you will lean the whole lot off too much.

... then once you have it installed, tuned and into your second bottle.

you still wont see streaming lights, the pop rivets won't drop your floor pan and flames won't shoot out of the tail pipe.

Cheers

Justin

So a dry system runs inline with fuel system and wet just sprays nos in and hopes for best with fuel system ? Wet is much cheaper but the w.o.n kits look nice with lots of control etc

as in the above post, wrong way.

wet kit, will need install of extra fuel lines and fuel nozzle for the mix.

dry kit, uses the vehicles own fuel output to add the extra fuel required.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Oh yeah forgot to also mention need to also unplug the IACV as well. Thanks for the reminder @MBS206 Unplugging the TPS takes it out of closed loop so you're able to screw down the IACV without the ECU trying to add/subtract timing to maintain the idle (not sure PowerFC can even do this, but Nistune and the OEM definitely does)
    • For sale is my 1999 Nissan Skyline R34 GT-T, tuned to 234 kW / 313 hp. I've had the car for a few years as my daily driver. The car is original (as far as Skylines go), with only a few minor upgrades to enhance performance and driving experience, as typical for such a car of its age. Overall, it is in great condition with no body rust, thanks to its earlier import date. It features a top-notch security system (not literally, but it's great!) with remote start and still functional 4-wheel steering via HICAS. It comes with several performance and handling upgrades, including:     Hypergear 450HP Turbocharger running 17 PSI boost, installed mid-2021 by Jaustech     550cc injectors     Nistune ECU     Front-Mount Return-Flow Intercooler     X-Force Stainless Steel Exhaust     Upgraded engine mounts     Bottom end bearings replaced     BC Coilovers     Lenso DR1 rims     Bridgestone Potenza Adrenalin RE003 TL 245/40R18 97W tires, fitted early 2023 The interior is mostly stock, with a few additions:     Viper Satellite Tracking System with remote start     Bluetooth Double-Din Touchscreen Head Unit     Steering wheel cover Cons:     A few paint imperfections here and there     Driver’s seat shows more wear than the others. It's not torn at all, but I've added a seat cover to protect its condition. I also have a CarVX Vehicle History report available for serious buyers, so you don’t need to purchase it yourself. Price: $26,000 ONO.
    • I've had two suzukis in the past have an extremely hard time turning over and not starting after sitting for a few weeks. Ended up the alternator would seize up causing the starter to force. Same issue both times.  Maybe they're sourcing their alternators from the same place...
    • Ah right. Maybe my rb just loves chewing through batteries lol.
    • On the R34 can't you just unplug the IACV? This is the way I've always done it on the R33. Disconnect IACV, get it idling around 650rpm, and then do a power reset on the ECU to get it to relearn idle (factory ECU).   The big reason no one has touched on as to why you'd want to get the base idle right, is that it means the computer needs to make smaller adjustments to get a good idle at 700-750rpm.   Also, cleaning the IACV won't normally make the car suddenly idle lower or higher. The main issue with the IACV gumming up is that the valve sticks. This means the inputs the ECU gives, aren't translating to changes in air flow. This can cause idle choppy ness as the ECU is now needing to give a lot of input to get movement, but then it moves too far, and then has to do the same in reverse, and it can mean the ECU can't catch stalls quickly either.
×
×
  • Create New...