Jump to content
SAU Community

Recommended Posts

Hey Lads,

So this saturday I was going to front up with my 33 to Mallala for a practice session, to be honest the only motorsport event I have ever done was a motorkhana .

Can anybody give me some insight as to how Mallala run their track practice sessions ?

Any advice for a novice ?

I am going to do an oil change before I go, taking my air compressor for tyre pressures, wheel brace to keep check of my wheel nuts etc.

The car is being trailered there and home so if I break it I will call it a day rather than try and fix something there.

Link to comment
https://www.sau.com.au/forums/topic/419206-first-track-day-at-mallala/
Share on other sites

  • Replies 68
  • Created
  • Last Reply

Top Posters In This Topic

All that so far sounds good, check cooler clamps and maybe grab some spares from repco before hand Hopefully I catch you out there

So your heading out this weekend then Steve ?

gates open at 8:30 from what I read on mallala's website, whether that actually is the case could be another thing ?

I will only be on street tyres etc, I am hoping they can put me a in a slower group (preferably something with honda civics, toyota corolla's, greyhounds or something)

I don't think so. Last time I went to one of these practice days I got there an hour or two late and still got on the track.

Ricky_Bobby, they split everyone into different speed / experience groups. You should just be able to let them know what group you want to be in.

Still have the last few track day sheets in my glove box.... Usually

Group 1 - Open Vehicles (those with no roof literally)

Group 2 - People with CAMS License

Group 3 - People with single day license (if you're new, you'll have this)

Group 4 - Go Karts

Group 2 can mingle with Group 3 if they feel like or have mates with (as long as they have enough wrist bands).

All the checks have been covered above. But in short, oil, water, brakes**, tyres....

Will see you out there! have 4 mates plus others I know all going out (including the old fella)...so should be a good day!

15 minutes between sessions, therefore about an hour each time you go on with your group.

Edit* = mate turned up at lunch last time, still gone on track or afternoon sessions (about 4 sessions from memory).

To be honest on the Mallala track day's I've never seen it...but if they see someone leaking alot of water or oil they'll do something. At the Time-Attack's there is definitely full-inspect scrutineering, but this isn't one of those :)

Remember long sleeve shirt, long pants, sealed shoes.

As others have said, give everything a once over, make sure you've got enough brakes, etc. I wouldn't stress too much about dodger last minute mods like an oil cooler, cos if you spring a leak your day will be over. Just drive to your car. Ya won't be putting too much stress on things running street rubber and pads.

You need wrist to ankle coverage like most events, helmet of course

Mallala run practice days are usually self scruitineered, so you just sign to say it's all ok. I usually rock up by 9, complete documentation (plus a briefing for first timers). Then unload ( I simply empty my boot) then check everything is cool and stand around talking shit till your session starts.

Run at your own pace. You will be in the day licence group which will have a mixed bag of cars and experience, so keep an eye out for the other cars, can be very unpredictable. Each session is 15 minutes and you will be out every hour. After a couple of sessions you will get used to what the others are like and get into a groove.

Be ready to uncover issues you found before such as boost leaks and brake fade. Most importantly have fun !

Will probably see you around

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yep, pretty much what you said is a good summary. The aftermarket thing just attached to the rim, then has two lines out to valve stems, one to inner wheel, one to outer wheel. Some of the systems even start to air up as you head towards highway speed. IE, you're in the logging tracks, then as speeds increase it knows you're on tarmac and airs up so the driver doesn't even have to remember. I bet the ones that need driver intervention to air up end up seeing a lot more tyre wear from "forest pressures" in use on the highway!
    • Yes, but you need to do these type certifications for tuning parts. That is the absurd part here. Meaning tuning parts are very costly (generally speaking) as well as the technical test documentation for say a turbo swap with more power. It just makes modifying everything crazy expensive and complicated. That bracket has been lost in translation many years ago I assume, it was not there.
    • Hahaha, yeah.... not what you'd call a tamper-proof design.... but yes, with the truck setup, the lines are always connected, but typically they sit just inside the plane of the rear metal mudguards, so if you clear the guards you clear the lines as well. Not rogue 4WD tracks with tree branches and bushes everywhere, ready to hook-up an air hose. You can do it externally like a mod, but dedicated setups air-pressurize the undriven hubs, and on driven axles you can do the same thing, or pressurize the axles (lots of designs out there for this idea)... https://www.trtaustralia.com.au/traction-air-cti-system/  for example.... ..the trouble I've got here... wrt the bimmer ad... is the last bit...they don't want to show it spinning, do they.... give all the illusion that things are moving...but no...and what the hell tyre profile is that?...25??? ...far kernel, rims would be dead inside 10klms on most roads around here.... 😃
    • You're just describing how type certification works. Personally I would be shocked to discover that catalytic converter is not in the stock mounting position. Is there a bracket on the transfer case holding the catalytic converter and front pipe together? If so, it should be in stock position. 
    • You talking about the ones in the photo above? I guess that could make sense. Fixed (but flexible) line from the point up above down to the hubcap thingo, with a rotating air seal thingo. Then fixed (but also still likely flexible) line from the "other side" of the transfer in the hub cap thingo up to the valve stem on the rim. A horrible cludge, but something that could be done. I'd bet on the Unimog version being fed through from the back, as part of the axle assembly, without the need for the vulnerable lines out to the sides. It's amazing what you can do when you have an idea that is not quite impossible. Nearly impossible, but not quite.
×
×
  • Create New...