Jump to content
SAU Community

Speed Off The Streets - March 9 - Wakefield Park - $150 Entry

gregor

By gregor,
in Events Archive

 Share

Recommended Posts

gregor Rising Star

gregor

Posted
Posted (edited)

The Rotary Enthusists of NSW (RENEW) have some track days booked this year and would like to invite members of this forum to enter. The first event is at Wakefield Park on the 9th of March.

Our days are run as a track day, not a supersprint, and focus on maximum track time and therefore the maximum opportunity to improve driving skills. All our trackdays have timing included in the entry fee and results go on Natsoft. We limit the entries to four speed groups with a maximum of 12 cars per group. This is not a free for all with oversubscribed entries and that means more clean laps and making the most of your track time. We always have a broad variety of cars at our events, not just rotaries, and the mood of the days are always relaxed and friendly.

The speed groups are carefully monitored and regularly re-assessed throughout the day to keep it safe and enjoyable. There are a number of untimmed sessions in the day so drivers can take an instructor along with them to fine tune their driving. One of our members found a five second improvement after just one instructor session - and his case is not unusual.

We always welcome people with interesting cars and the right attitude including first timers. We will have the link to the entry form up in a few days. Hope you can make it.

**Title changed as no longer a Renew Track day - See further down for info from gregor** -

Edited by NISMO
gregor Rising Star

gregor

Posted
  • Author
Posted

Sorry for the late response, had some issues getting the form up on our site. I've attached it here for now.

Entry cost is $250 for members, $290 for non members. Fire extinguisher is mandatory for all entrants.

All welcome, even the wasteland's most prolific trolls :cheers:

WP_entry_form_9th_March_2013.pdf

Calsonic14U Mentor

Calsonic14U

Posted
Posted

WOW my 32 track car might just be ready as most of the stuff is getting fitted the week of the 25th of FEB. Cage ect. If shes a goer i may enter.

  • 2 weeks later...
gregor Rising Star

gregor

Posted
  • Author
Posted (edited)

Due to an underwhelming number of entries this event will now be run as a speed off the streets day by Wakefield Park. Entry cost is $150, rock up and pay on the day. Fire extinguishers are no longer mandatory as per other speed off the street events.

Edited by gregor
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Komdotkom
      Alcon TA6 Calipers on R33 GTST - Flexing

      By Komdotkom · Posted

      Wow, there's a user name I haven't seen for a while! Good to see you back @Sydneykid
    • MBS206
      Question about BoV on RB25DET NEO

      By MBS206 · Posted

      Something to note, on an aftermarket BOV, it's quite possible to end up with the worst of both worlds, where on light throttle, there isn't enough force to open the BOV so you get small reversion and driveability issues, and with the venting to atmosphere, it dumps a lot of fuel on shifts. Realistically, dumping to atmosphere under power isn't a major driveability issues, compared to the issues of stalling from reversion. If you're getting up the throttle, then putting the clutch in, say on a shift up, but then don't release the clutch, yes, the engine can and will stall, but, just drive around it, and that's easy, let the clutch out in the next gear and the car rolling will keep it all running / going.who wants a hard hit of throttle and then to just let the motor idle anyway?   Main issue for driveability is blipping throttle and it wanting to stall, like when parking or trying to move in slow traffic.
    • soviet_merlin
      2020 Nissan Skyline 400R V37/Infiniti Q50 RS insurance in NSW

      By soviet_merlin · Posted

      As in they quoted one price, you mentioned the exhaust, and they promptly added $200 on top? Interesting.
    • GTSBoy
      Question about BoV on RB25DET NEO

      By GTSBoy · Posted

      Note that I'm not suggesting this is a great idea. Just saying that it is something that could be done to achieve a better outcome than the more shit ideas will provide.
    • luke gtr
      What's this Foreign Object?

      By luke gtr · Posted

      I'd try removing it, connecting hoses and see if that helps. Depending on specs, it could actually be restricting the flow(it also might be helping).
×
×
  • Create New...