Jump to content
SAU Community

Recommended Posts

Hey Guys,

I have a 2005 250GT Four door Automatic, the gearbox seems a bit sluggish and when at high RPM it makes a starnge honk noise when changing gears, was considering upgrading to a better gear box or transmission, forgive me i have very limited knowledge on cars, any suggestions one what i should get/do and how much it may cost me to do so.

Thanks

Link to comment
https://www.sau.com.au/forums/topic/419396-new-better-v35-gear-box/
Share on other sites

Well its had a major service like 6 months ago when i got it, but it was still making strange Honk noise, and lol yes i meant shiFt lol, and no i havnt checked transmission fluid, might do that when i get home.

Had a look at the transgo shift kits, seems awesome although i dont believe they make kits for my gear box ive got RE4R01B in my car, and it only appears to support the RE4R01A

Edited by Hunter_in_a_V35_250GT

Take it to transmission specialist, change what you need to on the gearbox.

Get a transmission cooler if you haven't got one already.

No need to get an entire new transmission. I've had my transmission rebuilt in my old R33 skyline after it started slipping gears, and the improvement was just excellent once done, had a shift kit/stall converter etc + a cooler on it too.

Edited by Murry33

I had my RE4R01B trans upgraded by a local Adelaide place. they put all new full internals from a stagea turbo trans (7 plate instead of 5) and their own trans kit for about $2500. even as a 2.5 litre motor it chirps the wheels between gears

the RE4R01B trans is almost identical to r33/r34 except for the input shaft

the R01A trans parts are not interchangeable as far as i can tell

Edited by Deep Dish V35

Thanks for all the imput guys really appreciate it, upgrading the Gearbox sound like the best bet/cheapest option, anyone know if the honking sound it makes when on high RPM is a faulty Gearbox or is that just the way it is when going fast? how much roughly does a shift kit cost to buy and install?

Wonder if they used the correct fluid when they did this "full service"

Buddy, a shift kit isn't going to fix your gearbox if its rooted. It's going to make it more rooted. Check the fluid, properly, when the car is hot. Go from there.

yeah an auto trans specialist should be putting it on a hoist, removing the access panel and valve body to inspect the internals before doing any upgrades. a shift kit will put lots of extra load on the components and break the weakest part

cool will deffinately get it checked out before any upgrades are to be done thanks everyone for all the imput they have given me, next step is to see a good trans speacialist

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah its bad eh. Ey! Watch your mouth. Yep, spot on. The rear's are always gone too though from brake checking. I had them perilously close to a tree that we had taken down. I think the tree peeps may have taken it. Either for a trophy, or accidentally.  
    • f**kin' yikes! That insulation is the shittest stuff I have ever seen. You need to do an insurance job on that f**ker, pronto. WRT to the washer cover, I would have said that there'd have to be some at a wrecker, then remembered that it's a BMW, and reasoned that every single wrecked one would have been tailgating and so the front end would be trashed.
    • Oh and I lost my headlight washer jet cover!
    • Ok, so I got myself some X1 wheels really cheap to try out, they're a bit different and I like them but they're really narrow (18x8) they are available in staggered 18x8/9 also but really hard to find.  I kinda dig them, but not as much as the F10 19's I usually run, so these go into the wheel pile.         As I mentioned in another thread, I got a new exhaust. It's an off-the-shelf stainless one that fits OH-KAY. I don't love the tips size and how far they come out the back, I think I might cut the tips off and replace with some smaller (~3") ones that don't extend as far. It sounds really good though, I'm not sure if its just in my head but the car feels a little quicker, more responsive.      I fitted an eBay special front lip. Surprisingly it fit perfectly and all holes lined up. Its a little rickety but I haven't put any double sided tape on yet, I want to clean the front bar up where it has scraped the road a lot and fil in the number plate holes (or, get body coloured wrap to cover them - is this a thing?  I'm not sure if I'll leave it gloss or pain it matte. I really like it though, I don't particularly like the front bar without it, I don't really like the M-Sport and to get anything else is just too expensive. That said, I might need a new one now anyway as I dropped the car onto the jack after forgetting to put ramps under the front wheels. It bent a lot and while it did go back to normal after I got the car off the jack, I do fear I have not done it any favours.    Lastly, my headlights died. Different problems in each. They have gotten much dimmer over the past year or so, I put new (uber expensive) OSRAM bulbs in them but to no avail. One of them pointed at the ground and the other just kinda did its own thing with light working sometimes. Yeah, check this 18 year old BMW headlight wire. I reckon I know why they were stuffed.            BTW, the yellow and black is the power to the Xenons. Yikes. I hunted around an researched my options here. I would have loved to just get a replacement harness but not a thing. My car has adaptive headlights, that is they rotate left and right with the steering wheel. Good condition used adaptive xenons were over $700 each, non adaptive were around $400 each, but I couldn't help but think that they're all around 18 years old now, surely they'd have the same problems. So I looked at newer LCI headlights but they were even more expensive and I couldn't confirm that they'd be plug and play with lots of people having lots of opinions so not worth the risk.  I ended up getting brand new Chinese headlights from MARS. They're very close to OEM with only the angel eyes being a bit different. I didnt want crazy turn signals or sharp DRL's or anything. Not my bag.  They're not adaptive, I thought thats a feature I wouldn't really miss. So I coded that out.  The lights are awesome, they look so nice and they take so many years off the car. The angel eyes look great and the headlight brightness is ridiculous. I was so used to the old ones, I didn't realise just how bad they were. The new ones use the OEM bulbs, Xenon ballast and leveller motor which I was happier with. The only issue with them is that the rear cover is held on by SEVEN screws. This will be a nightmare to get to and open when I need to change bulbs.   
×
×
  • Create New...