R34 Gtt Stock Boost Gauge Sender / Sensor - Please Help!

[DaHyp3]

The sensor which sends the signal to my stock boost gauge in my '34 has died. From what I have been able to

dig up on the forums and google, most people just replace their boost gauge. Only problem is I don't wanna do that

as I already have the Nismo triple gauge set and am quite attatched to it. I did also find a D.I.Y on fixing dry solder

joints which is apparently a common problem, I did try this and ended up completely destroying it, so now I need a new one.

The sender / sensor unit I am speaking of is located near the brake master cylinder and has PA66-G30 written ontop

of it. Does anyone know where I can get one from?

I am located in Adelaide, I have tried some import wreckers and hours searching online, but no luck....

Edited February 8, 2013 by DaHyp3

[34GeeTeeTee]

I am going to change mine soon so send me a PM man

[DaHyp3]

PM Sent

[scotty nm35]

Just solder it, dry solder joints on the pins is usually the cause.

http://www.skylinesaustralia.com/forums/topic/297345-m35-factory-boost-gauge-repair/page__p__6208183__hl__m35%20boost%20gauge%20repair__fromsearch__1#entry6208183

[DaHyp3]

It is unfixable, broken casing and broken off hose connection. I need a new one or working 2nd hand.

Does anyone know the part number for it or if an R33 boost sender would work? If an R33 one works

would it send the correct signal?

[666DAN]

R33 one works fine as its the same volt per psi. Plug may be different shape though, so would need that as well.

[Stallo]

Can't you just order one from Nissan?

[darn76]

I am in need of this part as well. Anyone know where to buy a new one?

[niZmO_Man]

Contact taarks?