Jump to content
SAU Community

Recommended Posts

  • Replies 1.7k
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Saul is working in his store when he hears a booming voice from above: "Saul, sell your business." He ignores it.

It goes on for days. "Saul, sell your business for $3 million." After weeks of this, he relents, sells his store.

The voice says ‘Saul, go to Las Vegas."

He asks why. "Saul, take the $3 million to Las Vegas." He obeys, goes to a casino.

The voice says, "Saul , go to the blackjack table and put it down all on one hand." He hesitates but knows he must.

He’s dealt an 18. The dealer has a six showing. "Saul, take a card."

What? The dealer has -- "Take a card!"

He tells the dealer to hit him. Saul gets an ace. Nineteen. He breathes easy.

"Saul, take another card."

"What?"

"TAKE ANOTHER CARD!"

He asks for another card. It’s another ace. He has twenty.

"Saul, take another card," the voice commands.

"I have twenty!" Saul shouts.

"TAKE ANOTHER CARD!!" booms the voice.

Hit me,Saul says. He gets another ace. Twenty one.

The booming voice goes: "Un-f**king-believable!"

--------------------------------------------

Two guys are walking down the street when a mugger approaches them and demands their money.

They both grudgingly pull out their wallets and begin taking out their cash.

Just then one guy turns to the other and hands him his only bill.

"Here’s that $20 I owe you," he says.

--------------------------------------------

A guy meets a hooker in a bar.

She says, "This is your lucky night. I’ve got a special game for you. I’ll do absolutely anything you want for $300, as long as you can say it in three words."

The guy replies, "Hey, why not?"

He pull his wallet out of his pocket, and one at a time lays three hundred-dollar bills on the bar, and says, slowly: "Paint…my…house."

--------------------------------------------

A man is driving his five year old to a friend’s house when another car races in front and cuts them off, nearly causing an accident.

"Douchebag!" the father yells.

A moment later he realizes the indiscretion, pulls over, and turns to face his son.

"Your father just said a bad word," he says. "I was angry at that driver, but that was no excuse for what I said. It was wrong. But just because I said it, it doesn’t make it right, and I don’t ever want to hear you saying it. Is that clear?"

His son looks at him and says: "Too late, douchebag."

--------------------------------------------

An old woman is upset at her husband’s funeral. "You have him in a brown suit and I wanted him in a blue suit" The mortician says "We’ll take care of it, ma’am" and yells back ‘"Ed, switch the heads on two and four!"

Acetylene Incident - Why we don’t store acetylene in a closed up vehicle!

  • This is an incident in Newcastle. It happened on Monday the 29th of September. A fitter with a works van left an E size Oxygen and Acetylene cylinder on the back seat of a Toyota dual cab over the weekend. The Acetylene cylinder must not have fully closed and a small leak occurred.
  • Over the weekend the Acetylene had accumulated in the van. On the Monday morning the fitter approached the van and opened the door, a large explosion took place. We believe the ignition could have been caused by either the internal light, the automatic door control or by a mobile phone which was on the front seat of the van. The fellow was also a smoker. He has damage to his ear drums and facial damage. As you can see by the attached photos he was very lucky.
  • FLAMMABILITY LIMITS (% by volume in air):  Lower: 2.5  Upper: 100 – an extremely wide range!!!!
  • Use or store only in a well-ventilated area. ( inside of the truck is not well ventilated)
  • NFPA RATINGS: Health 1; Flammability 4; Reactivity 3;

post-3069-1137373176.jpg

post-3069-1137373242.jpg

post-3069-1137373372.jpg

A 90-year old man said to his doctor,

"I've never felt better, I have an 18-year old bride who is

pregnant with my child. What do you think of that?"

The doctor replied, "I have an elderly friend who is a

hunter and never misses a season. One day he was in a hurry

and picked up his umbrella by mistake. When he got to the

creek, he saw a beaver.

He raised his umbrella and went "bang, bang," and the

beaver fell dead. What do you think of that?"

The 90-year old man said, "I'd say somebody else shot the

beaver."

The doctor said, "My point exactly"

A Welsh man buys several sheep, hoping to breed them for wool.

After several weeks, he notices that none of the sheep are getting pregnant, and phones a vet for help. The vet tells him that he should try artificial insemination.

The farmer doesn't have the slightest idea what this means but, not wanting to display his ignorance, only asks the vet how he will know when the sheep are pregnant. The vet tells him that they will stop standing around and instead will lie down and wallow in grass when they are pregnant.

The man hangs up and gives it some thought. He comes to the conclusion that artificial insemination means he has to impregnate; the sheep himself. So, he loads the sheep into his Land Rover, drives them out into the woods, has sex with them all, brings them back, and goes to bed.

Next morning, he wakes and looks out at the sheep. Seeing that they are all still standing around, he deduces that the first try didn't take, and loads them in the Land Rover again. He drives them out to the woods, bangs each sheep twice for good measure, brings them back, and goes to bed exhausted.

Next morning, he wakes to find the sheep still just standing round. "Try again" he tells himself, and proceeds to load them up, and drive them out to the woods. He spends all day shagging the sheep and upon returning home, falls listlessly into bed.

The next morning, he cannot even raise himself from the bed to look out of the window. He asks his wife to look, and tell him if the sheep are lying in the grass.

"No," she says, "they're all in the Land Rover, and one of them is beeping the horn."

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • OK, Step 3, if you need to remove the valve body, either to replace it, the TCM, or to do a more complete drain.  First, you need to disconnect the TCM input wires, they are about half way up the transmission on the drivers side. One plug and the wires are out of the way, but there is also a spring clip that stops the socket from sliding back into the transmission. On my car the spring clip was easy to get, but the socket was really stuck in the o-ring of the transmission housing and took some.....persuasion. You can see both the plug to remove (first) and the spring clip (second) in this pic Incidentally, right next to the plug, you can see where the casting has allowance for a dispstick/filler which Nissan decided not to provide. there is a cap held on with a 6mm head bolt that you can remove to overfill it (AMS recommend a 1.5l overfill). Final step before the big mess, remove the speed sensor that is clipped to the valve body at the rear of the box.  Then removal of the Valve Body. For this the USDM Q50 workshop manual has a critical diagram: There are a billion bolts visible. Almost all of them do not need to be removed, just the 14 shown on the diagram. Even so, I both removed one extra, and didn't check which length bolt came from which location (more on that later....). Again it is worth undoing the 4 corners first, but leaving them a couple of turns in to hold the unit up....gravity is not your friend here and trans oil will be going everywhere. Once the corners are loose but still in remove all the other 10 bolts, then hold the valve body up with 1 hand while removing the final 4. Then, everything just comes free easily, or like in my case you start swearing because that plug is stuck in the casing. Done, the valve body and TCM are out
    • OK, so if you are either going for the bigger fluid change or are changing the valve body which includes the Transmission Control Module (TCM), first you should have both a new gasket 31397-1XJ0A and a torque wrench that can work down to 8Nm (very low, probably a 1/4 drive one). You can probably get by without either, but I really didn't want to pull it all apart together due to a leak. First, you now need that big oil pan. The transmission pan is 450 long x 350 wide, and it will probably leak on all sides, so get ready for a mess. There are 24x 6mm headed bolts holding the pan on. I undid the 2 rear corners, then screwed those bolts back in a couple of turns to let the pan go low at that end, then removed all the middle bolts on each side. Then, undo the front corner bolts slowly while holding the pan up, and 80% of the fluid will head out the rear. From there, remove the remaining bolts and the pan is off. You can see it is still dripping oil absolutely everywhere...it dripped all night.... I got another couple of litres when I removed the pan, and then another few when I removed the valve body - all up another 4l on top of the 3 already dropped in step 1.
    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
×
×
  • Create New...