Jump to content
SAU Community

Timing Belt Noise

AngryRB

By AngryRB,
in General Maintenance

 Share

Recommended Posts

AngryRB Grand Master

AngryRB

Posted
Posted (edited)

hey, my timing belt has become noisey, i know its the timing belt because a mechanic friend dripped some water on the belt and the noise dissappeared for a day then came back, its like a SSSS-SS-SSSSS-SSS-SSSS-SSS noise if you know what i mean.

The belt is due for a change, but appears good still with no cracks etc.

Question is , ive had the front cover off and the belt and pulleys are exposed to the air, so would this being doing somthing to the belt?

and will the new belt make this noise after a short time due to being exposed too?

timing belt has done 65000k's

Edited by AngryRBGTX
Link to comment
https://www.sau.com.au/forums/topic/420313-timing-belt-noise/
Share on other sites
jjman Mentor

jjman

Posted
Posted

I would be replacing the belt and bearings etc ASAP man, your motor is relying on it and it ifs making noises that is generally a bad thing!

heavily agreed.

Otherwise having that cover off wont do anything untoward unless you drive through a big sand dune or otherwise live in a really dusty dirty area.

Beyond this the cover can often hide noises from the cam belt system so when you remove it you can then notice noises more. (this also works the other way round like with my car where the cam cover was resonating a weird sound and this stopped when the cover was removed :S [fixed now- new rubbers])

AngryRB Grand Master

AngryRB

Posted
  • Author
Posted

I would be replacing the belt and bearings etc ASAP man, your motor is relying on it and it ifs making noises that is generally a bad thing!

yeah, ive got the new belt so ill take it off road til its done im just wondering if this noise will come back if i keep the cover off, i kept cover off cause it seemed noisey with it on and i broke 2 CAS's and was worry it was contributing at that time. :yes:

AngryRB Grand Master

AngryRB

Posted
  • Author
Posted

When you took the top cover off, did you pack out the CAS to suit?

Makes a good noise while the CAS has its guts pushed out.

not sure what you mean, i replaced that outer rubber gasket and just bolted up as normal, the sound is definitely the belt, although the engine does make kind of a mitsubishi magna sound which might be the cas?

jjman Mentor

jjman

Posted
Posted (edited)

yeah thats correct then,


Basically you cant just remove that cam cover as well as the rubber gasket as you will have seen there are basically some washers in that gasket where the CAS bolts on to and this spaces it out by the desired amount. If you put the CAS straight back on without this spacing there it can do some damage to it all.


Also, from my experience, i hope you managed to get the CAS back on exactly at the same point as it was. Mine was out (rotated) by 2mm which wound up being 4 degrees retarded. And thankfully retarded and not advanced!

Edited by jjman
AngryRB Grand Master

AngryRB

Posted
  • Author
Posted

yeah thats correct then,

Basically you cant just remove that cam cover as well as the rubber gasket as you will have seen there are basically some washers in that gasket where the CAS bolts on to and this spaces it out by the desired amount. If you put the CAS straight back on without this spacing there it can do some damage to it all.

Also, from my experience, i hope you managed to get the CAS back on exactly at the same point as it was. Mine was out (rotated) by 2mm which wound up being 4 degrees retarded. And thankfully retarded and not advanced!

yeah i put those spacers on with the gasket, i learnt the hard way and broke two CAS due to incorrect spacing and alignment and i broke the gear off the cam too, bloody expensive mistakes!

AngryRB Grand Master

AngryRB

Posted
  • Author
Posted

does anyone know how accurate the timing marks are? ive just taken everything off and have it all lined up to the marks, the crank is spot on but the cam wheels are both slightly off, but that might be just the way it is, probably need adjustible wheels to get things perfect???

luke gtr Grand Master

luke gtr

Posted
Posted

does anyone know how accurate the timing marks are? ive just taken everything off and have it all lined up to the marks, the crank is spot on but the cam wheels are both slightly off, but that might be just the way it is, probably need adjustible wheels to get things perfect???

the marks are spot on.

if they are out, i would be saying youre a tooth out somewhere.

get your mechanic to check it if youre not 100%

t_revz Grand Master

t_revz

Posted
Posted

does anyone know how accurate the timing marks are? ive just taken everything off and have it all lined up to the marks, the crank is spot on but the cam wheels are both slightly off, but that might be just the way it is, probably need adjustible wheels to get things perfect???

With my crank at TDC both my cam marks were about half a tooth retarded. Dialling them in they were 3.5 degrees exhaust and 6.0 degrees inlet out. Marks lined up after pretty much spot on after

luke gtr Grand Master

luke gtr

Posted
Posted

With my crank at TDC both my cam marks were about half a tooth retarded. Dialling them in they were 3.5 degrees exhaust and 6.0 degrees inlet out. Marks lined up after pretty much spot on after

really?

mine were spot on.

not out in the slightest.

go figure....

AngryRB Grand Master

AngryRB

Posted
  • Author
Posted (edited)

maybe the old belt must be a bit stretched because its a little shorter and was bloody hard to get on it and now its pretty much spot on, the exhaust cam looks slightly advanced but close enough.

Edited by AngryRBGTX
AngryRB Grand Master

AngryRB

Posted
  • Author
Posted

my noise was more of a hissing, but the noise you have is what i had when the top cover was on,

could that top cover be getting rubbed by the belt i wonder? id really like to get to the bottem of that noise

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • soviet_merlin
      Stagea Front CV Axle Question

      By soviet_merlin · Posted

      Man, different parts but the same numbers is terrible @dbm7! And it doesn't help that most online shops don't list the part numbers at all. They just give a list of compatible models...
    • MBS206
      R32 GTST - 600KW+ RB28/CD009 Build

      By MBS206 · Posted

      Slow when hot could also be because its getting more dynamic compression, OR things are getting a bit tighter once it is all expanded. If it were an earthing issue, typically I'd expect you to have it have issues all the time. Unless it's really a combination of both things. Where the higher compression, and things being a bit tighter, is giving that bit of extra load and you do need a slight clean up on the cables/connections.
    • dbm7
      Stagea Front CV Axle Question

      By dbm7 · Posted

      Yeah, this is one of the most annoying things about nissan part numbers... I've got an unrelated example... Image is of the AT output shaft ~ they have the same part#, but clearly the shaft on the left is beefier design to that on the right ...the difference (essentially) is the 'lighter' shaft on the right, is for engines up to RB25DE (this includes RB20 variants) : the shaft on the left is for RB25/26DET(T)....are they interchangeable? Yes...but obviously one shaft is going to be stronger than the other...and, the lighter shaft is around USD115, but the heavier shaft closer to USD150...same part#... ...epc-data usually tells a tale ~ the amayama listing for 39100-23U60 has a note "Longest side is between 60 and 105 cm" ; no such info is there for 39100-23U70 ...and given the great disparity in price between the 2 parts, it makes me at least curious (to the point of caution) where the 'extra money' went? ...ie; these 2 parts have a cost difference that (to myself at least) isn't explained by 'plastic boot'...ie; with amayama there's AUD700 price difference ...plastic versus rubber?...I'm not seeing it like that...and 60cm ~ 105cm...??...that's a huge disparity....something hinky going on here... I'd try searching by VIN, not model... /2cents
    • Duncan
      Stagea Front CV Axle Question

      By Duncan · Posted

      I don't know for sure, but I'd expect them all to be interchangeable given the diff end and hub end don't move/change between any C34 series. Often Nissan will change part numbers and the aftermarket follows those year ranges; but the original part number change doesn't mean other parts won't fit. The change could be a change in material, internal parts or even just supplier. For example, all the RB gearbox to engine bolts are no longer available and there is a new part number instead. The only change is they went from cadmium plated bolts to zinc plated due to the issues manufacturing with Cadmium. They look different but work the same.
    • soviet_merlin
      Stagea Front CV Axle Question

      By soviet_merlin · Posted

      One year is a bit concerning. Did you try contacting GSP? It says 5 year warranty on the box if I remember correctly. I'm also running their driveshafts on my S2 Stagea.   You could check the part numbers on Amayama for your year. Here's the link for my 1998 which gives the 39100-23U60 part number. Well, that and 39100-23U70. https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6649-rb25det/trans/391 What does it say for yours?
×
×
  • Create New...