In-Tank Hose, E85 Compatible

[tricstar]

I have looked and rung around, and the only place I can find it is Jegs in the states.

what are people using in-tank for there E85 setups and where to get it in aust. please

[Deano 1]

Pm DVSJEZ

When I did my nismo twin pump setup he sourced some e85 fuel line for me. He uses it on all his cars in the shop.

I put some in a glass jar, along with the wiring I used to wire up the pumps, and filled it with e85

It's been in there for 6 months and last I checked it, it was fine no signs off any deteration

[scotty nm35]

I use standard neoprene rubber intank hose, proflow gear I think.

[boostn0199]

Standard stuff or any efi fuel hose is fine.

[scotty nm35]

Needs to be coated on the inside and outside, which is the main difference between intank and standard efi hose, which only has the coating internally.

[ltcree]

ENZED usually stock submersibale alcohol hose, i think it has a white or yellow line down it from memory. This is what I will be using in mine.

[KING87]

I just got some in tank hose from the local repco. This is what they ordered in

http://www.gates.com/brochure.cfm?brochure=5091&location_id=541

[34GeeTeeTee]

I think the brand is Parker or something like that, it is E85 approved and works fine on mine

[tricstar]

ok

Enzed don't do any hose E85 compatible..

Repco usually stock the Gates stuff, but there is a supply issue, not available until later March /-:

AutoPro have stock but $40 per foot

so getting 2 feet from AutoPro today..

[scotty nm35]

Like I said, Proflow sell it in 1/2 meter lengths so any supplier should be able to get it. Not cheap though.

[tricstar]

yeah just found the Proflow stuff for $33per 500mm online ( VPW website ) and it is alcohol/ethanol compatible.

thanks