Jump to content
SAU Community

Fitting Exhaust Any Think I Need To Know?

HYBRID VL

By HYBRID VL,
in Engines & Forced Induction

 Share

Recommended Posts

HYBRID VL Community Regular

HYBRID VL

Posted
Posted

Ok fitting my front turbo dump pipe and xforce cat this weekend to my R33 GTS25T is there anything i need to know or do just to make life easier in the process i only have access to ramps and trolley jack.

I already have a Nismo cat back 3 inch system so im guessing a cat and front splite pipe from turbo should fit on np.

rgb Enthusiast

rgb

Posted
Posted

Use plenty of lube! Those bolts and nuts are going to be rusted. Might want to buy a whole new set of high tensile fasteners. If you're removing the dump pipe, you might as well change the turbo outlet gasket, if you haven't done it in a while.

Are you using the stock front pipe? This piece has a little lip where it meets the dump pipe, meaning the internal diameter tube sticks out from the flange, and it might not fit properly into your new dump pipe.

AngryRB Grand Master

AngryRB

Posted
Posted (edited)

Make sure you are using the proper Steel gasket for the dump pipe, if you get given one that looks like paper between two sheets of aluminum then give it back cause it will leak, tighten the bolts a little at a time and evenly, and dont cross thread anything or you will want to cry and swear alot :domokun:

Edited by AngryRBGTX
HYBRID VL Community Regular

HYBRID VL

Posted
  • Author
Posted

Ok yer i was guessing rust would be prominent as far as i know the its the whole system from turbo and cat so im not using any stock exhaust components except bolts.

i was also told use Loktite on ALL exhaust bolts dont drown it just a swipe on 1 side of the bolts or nail polish if i dont have loktite.

Is there any gains in cleaning my o2 sensor if so how would i go about doing it if i can.

also i remember on my TX3 i had a turbo to manifold gasket that was like a perferated steel looking thing it burnt out same day it was installed and started leaking so i stay away from that crap.

HYBRID VL Community Regular

HYBRID VL

Posted
  • Author
Posted

Yer well weather wise the exhaust didnt happen wasnt interested changing it in the rain so next week will have to do thanks for the help guys yer was going to take the heatshield and that off will it be a good i dea to mod the HS abit so it fits back on with the 3 inch exhaust im sure it will help with engine bay heat ransfer or somthing. maybe looks.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • sunsetR33
      Replacing turbo water line - any recommendations or advice?

      By sunsetR33 · Posted

      One thing I can tell you is, do it properly the first time. If you encounter unexpected problems just let the car sit for a week or two if you have to get some other parts or figure stuff out.  I'd have said go and use as many OEM parts as possible but since you want to change the turbo later on a custom kit is probably the better choice. Since I have no experience with RB25 just compare parts diagrams and images before buying a line kit and it should be easy to see if it has everything you need. Amayama has very good parts diagrams and part number lists, that is what I used a bunch to figure out what I might need. And don't forget to plan ahead and possibly renew other stuff that's easy to get to while you're in there doing the turbo lines. Happy wrenching
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 4:   Hi all, good news. Engine is running and all the gaskets and seals seem to be working as intended. No leaks so far, even the JB Weld seems to hold. I flushed out the old coolant a few times and put in fresh coolant, not Nissan stuff, I decided to try the Ravenol Protect FL22, they claim it works for a wide variety of JDM cars and the opinions on it by some people were pretty good. And it has the nice poison green color! And man am I glad I bought a coolant system tester earlier this year, vacuum filling works wonders on this engine. I can definitely recommend this to anyone still doing it the old school way. All you need is compressed air supply. Will have to do a small test drive as soon as I can, I removed the gauge cluster again as the tacho needle was still bouncing around a bit but it was much better than before already.  I also found some cracks on all 4 tires inner and outer sidewalls. Apparently these tires should 't be parked on for extended periods or be kept under 0 degrees during storage, which I did not know. Clearly the previous owner didn't look into those details either, he probably bought them just cause they are cool semi-slicks. I'm just wondering how tf I am supposed to reach 30-80 degree tire temperatures on the public road consistenly, these tires were never going to work for my use case. I'll probably order Continental SportContact7 ones as these are the best allround summer tire available right now and I don't think I'll need anything crazier for now. Do let me know if you have experience with various tires and which ones you recommend.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      You have no idea how many goddamn boxes I received these past three months haha Most have been put to use by now though, luckily
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Not going to pretend I didn't do a bit of junky work this time around, but mostly due to the fact that some things I am not willing to spend days fixing right now, like wiring. I try to do most things properly the first time around.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Regardless of neglect or incompetence, fixing either is tedious and annoying. Most of the neglect on my car is definitely rust. I hope I can at least pass inspections later on and they won't fail the car due to slightly corroded hardlines. I was generous with rust converter and wax and it looks ok, most lines in the rear are hard to see properly anyways.  Definitely will test them though to make sure they don't rupture under pressure, in that case the car isn't going anywhere this year.
×
×
  • Create New...