Jump to content
SAU Community

Recommended Posts

Oh... I listened to the fax make a connecty sound. Will take a photo of my forms and email them through.

lol so the good news is; the fax hasn't actually been disconnected yet, although it should have been.

the bad news is you faxed the form wrong side up :P so I got 2 blank pages and no idea who to chase!

lol so the good news is; the fax hasn't actually been disconnected yet, although it should have been.

the bad news is you faxed the form wrong side up :P so I got 2 blank pages and no idea who to chase!

Chase.... ME! =-D

Nah it's all good. I photo/emailed the same forms through. Last time the same fax machine here at work decided to eat most of the form and pass the second page through without scanning it.

Faxes should have died with 56k baud modems if you ask me. ;o)

Not long now, unfortunately looks like my 32 wont be ready as funds have dried up for a little. But will be comming down once again to help out with timing, sign up and pointing and laughing at crazy driving ;) But definately will be driving in the next one :)

Yes i have it here i shall put it in my car now i also have the number "14" windscreen number that u guys had at the last texi i did, i forgot to give it back :P So thats in the car to lol.

Hi Guys,

I am from Tamworth NSW (about 5 hours away) but should be getting my car tuned in Newcastle on the 29th. Is there someone I can contact on the 29th in the evening to check if there are any spots left or should I post on here? I just want to make sure tuning is all finished and goes to plan before I commit to a day of skids/limiter!

Thanks

Best bet is to check in here and/or come on the day. We will post up in here if it is full.

Even if you don't run would be a great day to come and meet some of your Southern NSW Skyliners.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Some of them keep working fine. 9 out of 10 of them end up causing an absolute misery bleeding the system and get thrown on the workshop floor in a tantrum and never thought about again because they were never really needed and just added crap to the car that we could have done without. Same-same with HICAS, A-LSD, and various other stupidities that over eager 10x engineers thought we had to have.
    • Not required but appreciated. Super Coppermix Twin even the non-competition model feels like the pedal is noticeably heavier than stock which was pretty well judged IMO. I'll be swapping in the Nismo operating cylinder soon to see how that feels.  Personally I haven't felt anything that justifies replacing the damping loop, at least compared to more modern stuff where the clutch delay valve is actually quite noticeable.
    • He made that comment in my thread - In my case the vents ARE to lower engine heat, when the car is not moving, which is the only scenario I have heat problems with the aircon on, sitting in traffic, on 40C+ days. I can't imagine a scenario that this NC needs any at this point in time. I do not know if it will actually make my cooling when the car is MOVING worse, and I sincerely hope that won't be the case. If it does, well, um, f**k.
    • Nice, thanks. Thats why I was asking, there'd been a fair bit of discussion in the E90 world about vents and where it makes sense to put one (ie, over the filters is not great as that is inline or slightly behind the struts and in higher pressure area). I struggle with air flow and pressures. It sill weirds me out that a radiator in the boot can work. 
    • Neither really Vents, when located in the right place, will lower the engine bay "pressure", as air has a path to escape, thus lowering the engine bay pressure, thus.....improving the efficiency on the coolant stack (read: IC, condenser, radiator) This is why the Blits vented bonnet on my 33 worked so well, the vent was in the front 1/3 of the bonnet, which put it right after the radiator  If the vents are to far back toward the windscreen, which is a high pressure zone, it can actually force air into the engine bay, causing higher pressure and effectively loosing efficiency on the cooling stack, like the fab of raising the rear of the bonnet, which does allow heat to escape, but only when the car isn't moving  There's heaps of cool "fluid dynamics" info out there, but, I'll attach a video of a 'Merican joint that focuses on "Miatas" as I found it when looking into vents for mine, they explain it way better than me  
×
×
  • Create New...