Jump to content
SAU Community

Recommended Posts

I'm wanting to start tracking my r33 what suspension upgrades do I need to do. I already have bilstein shocks with lowered king springs. Also have whiteline swaybars front and back 24mm with the end links. What arms castor rods bushes ect do I need for a decent track setup. Brands would be a help to. The car will mainly be tracked at winton as I live in wangaratta.

Cheers Josh.

Link to comment
https://www.sau.com.au/forums/topic/420499-r33-gtst-track-suspension-setup/
Share on other sites

Thanks gtsboy. I've got a rough idea of what I need. Just wasn't sure on which brands are better ect and tried searching with not much luck. Also wasn't sure on exact settings. I'll try searching again. But thanks for the heads up.

Forget brands and other little mods. The biggest thing that will make a difference to your track time is tyres and driving training.

Otherwise if you still want to hash over this topic in this thread then you might want to mention what ur spring rates are in your coils as well as any adjustability in the shocks...


-GL n otherwise spend alot more time searching. Work out what camber, toe in, balance etc is and does, and you will also be able to understand alot more of the advice that will be made.

  • 1 month later...

Over the last few years we've taken an essentially stock R33 GTST to Winton and gradually upgraded it, noting the laptime benefits of each upgrade.

We reduced the weight significantly, (probably around 200kgs removed), ran the same boost pressure and stock brake system during this period. We also installed a VideoVBOX system to properly understand what was happening.

Whilst this car had previously had Tein Street Springs installed it still had some pretty rubbish standard shocks. So no coil-overs...

Biggest 'feel' benefit was a proper fixed back race seat. Not a lot of lap time here, but major gains to help learn what the car was doing.

Sway bars: -2.1" per lap

Whiteline Blade Adjustable, as most people attest, gave a massive laptime improvement on the same rubber.

Brake reconditioning: -2.8" per lap

Still the stock brake rotors, re-machined, Ferodo pads, Dot 5 fluid and new seals all-round.

Semi-Slicks (Toyo R888's) -5.58" per lap

We also shimmed up the diff a little before bolting these tyres on so it's difficult to tell how much of which was of benefit, but I can tell you the diff shims were very cheap and the tyres, not so much!

There's a million other little upgrades on there, like a HICAS lockbar and undertray, rear wing, but there's no way for us to directly prove the benefits using the data... and asides from the lockbar they aren't 'suspension' related.

We will have BC ER Coilovers on soon, but also a completely new RB30DET good for well over 500bhp and a roll cage, so it won't be a fair comparison. But I hope this helps.

Some more details on the project including on-boards etc here:

http://droppingthehammer.wordpress.com/

Best of luck, hope to see you there soon.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I’d love to find some where that can recover the dashes to look brand new and original. Mine has a very slight bubble, nothing compared to some I’ve seen though 
    • $170K. I asked one of the guys there as a joke if that price was just for the passenger seat as it was where the price sheet was... he tried really hard to crack a smile 😄 He also mentioned that every single part of the car was inspected and either restored or replaced with a new or as new part, or made from scratch. The interior was incredible, every inch like a new car.
    • Time for a modernisation, throw out the AFM, stock O2s, ECU into the e-waste bin. Rip out the cable throttle, IACV, pedal, etc. into the scrap metal bin. DBW, e-throttle, modern ECU, CANbus wideband, and the thing will drive better than when it left the factory.
    • I agree, don't go trusting those trims. As I said, first step is to put the logger away, and do the basics in diagnosis.   I spend plenty of time with data loggers. I also spend plenty of time teaching "technicians" why they need to stop using their data loggers, and learn real diagnostics.   The amount of data logs I play with would probably blow most people away. I don't just use it to diagnose. I log raw CAN data too, as a nice chunk of my job is reverse engineering what automotive manufacturers are doing.
    • I'm aware, but unless you're actually seeing the voltage the ECU is seeing and you're able to verify the sensors are actually working I find it hard to just trust STFT/LTFT. I will say, logging the ECU comes naturally to me because it's one of the lowest effort methods of diagnosis and I do similar things in my day job all the time. Staring at 20+ charts looking for something that isn't quite right isn't for everyone. NDS1 allows you to log almost everything so that's normally what I do and then sort out the data later. 
×
×
  • Create New...