Jump to content
SAU Community

Recommended Posts

Hey Guys,

I'm a new RB owner and I am hoping to upgrade my computer as the car need a tune. I need some advice on the brands of ECU's I can get, nothing fancy as the car is my daily. I've heard PowerFC is okay? Please help :)

Cheers, Ell

Link to comment
Share on other sites

  • 6 months later...

Heya,

If you have a lil extra to play with check out the Link G4.

On it's own it will make a big difference - but then i'm guessing you've got something already :)

An ecu is only as good as the person who tunes it. And if you were to put the same tune into a pfc as a link you won't see any difference.
Link to comment
Share on other sites

Will disagree - I've seen the results of moving the same setup from a PFC to a Link G4 Plug in.

The results were massive.

PFC is effectively a factory ECU that's been unlocked, as opposed to the Link, being far more advanced (anti-lag, launch control and all sorts of other goodies)

I do agree that a great ECU with a shite tune is never good, however there are limits to what some ECU's can handle.

Link to comment
Share on other sites

Anti-lag, etc has nothing to do with how a car performs because of the tune though. Setup 2 ecu with the exact same tune and they will perform pretty much the same. If you got massive performance gains from changing ecu then the tune wasn't the same. At any given point of the map there is only 1 ideal setting it should be at and it doesn't much matter what ecu is saying how much fuel to go in, or when to fire the spark plugs, as long as they say the right thing at the right time. sure some ecu's allow finer tuning than others, but not to the point of being massively different (unless you are at the limits of an ecu because of other factors such as it needing afms instead of a map sensor, etc). Sure you may have had an experience that says otherwise, but that doesn't change the physics behind it all.

And the pfc isn't just an unlocked stock ecu. It only really has 1 map (2 if you want to get technical, but 1 is fuel, 1 is ignition). The stock ecu has many more (or at least a nistune does).

Link to comment
Share on other sites

  • 1 month later...

Heya,

tuning a 34 GT-T can be VERY costly.
Make sure you kow where you want to go from DAY ONE - have a rough power figure in mind and aim to work towards it.

Re: ECU - for heavy modification, i'd recommend a G4 over a PFC. I've had both and whilst the PFC was ok for light modification, if you're wanting to go over the top, it simply doesn't keep up.

Main things to consider before slapping a bigger turbo on and saying done - cooling (GET AN OIL COOLER) fuel and ignition.
Splitfire coils, properly gapped plugs, uprated injectors and pump and a pressure regulator are what you need to be thinking about prior to manifold wastegate and intercooler.

I built my GT-T over several years, and wasted a lot of money on bad advice from the wrong people. Find someone who you can trust and half the battle is won.

Posted a link below to the final build, it makes around 290rkw - doesn't sound like much but with the amount of torque and how light it is, it goes pretty damn hard.

http://social.nengun.com/member/ares/my-daily-gtt

  • Like 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Great info @tidi0x  Will definitely be handy for others and maybe me if I decide to keep the shit box H pattern.
    • Bumping this up one last time.... I wanted to follow up on the clutch slave issue. I realized that what the issue comes down to is the pocket is flat milled, and the cylinder does not want rest flat. So in order to mount it correctly you will need to make a spacer for the fingers so the cylinder is floating. I took two plates of aluminum, drilled some holes and was good. I did still need to make the relief cuts in the bell housing, as even with the spacer the bleed section still interferes. The OE bell housing the mounting holes are raised from the housing.       
    • If the event in USA goes ahead will be interesting as it seems the rules will get more cars over here. Apparently the track is laguna seca too. Yeah s15, if I get a the lower dash trims, centre console and change front cross member to standard LCA position will fit clubsprint. See how rules are as i would rather do complete widebody than a bolt on flare to run the 295 with proper clearance.
    • If the car is legal height I can't see it being an issue. Found a thread on reddit that might offer some insight.   I got a ticket from a copper in QLD for my S15 being too low. They had this wheel thing on a stick that they put under the car and it hit my exhaust. Anyhow went to an exhaust shop to get the exhaust tucked up/hung a little higher and I wound the coilovers up a smidge. Don't think I even had to go back to the police station unlike when I got defected for having a carbon bonnet when I brought the S15 from the ACT to QLD and had to replace it and then rock up at a police station and have a yougish female officer who knew nothing about cars confirm that I had changed bonnets. Should have just painted the carbon bonnet yellow to match the rest of the car lol
    • Id like to race in the US i think alot of those track would suit me   For the s15? Youd be stuck between club sprint and the new Open Am wouldnt you depending on how much interior you have left in
×
×
  • Create New...