Gt3582 On A Hks Cast Iron Low Mount On A 25/30 In A R33 ?

[PLYNX]

Hey Guys And Gals;

Ran a bit of a search but couldnt find much on the above.

Just trying to confirm if a Gt3582 will fit on a HKS low mount cast iron manifold on a R33 gtst with a 25/30 combo ?

Thanks in advance.

[WARLORD]

its not going to fit the a/r cover is to big also if you get a 4'' intake it also is to big. i had a bit of a hard time fitting a .6 a/r on my hks low mount with a 4'' intake

http://www.skylinesaustralia.com/forums/topic/172704-money-money-money/page-15

[wolverine]

I had a GT3040 and now a GT3076 on there but we shaved the engine mount. With an extra inch in height with the RB30 block it should be ok but it will still be close.

[Frosty]

seriously tight fit, will def need to shave the engine mount

[GTScotT]

Considering the block is taller as said above you should be OK, bit of a shave on the engine mount at most.

A 3040 and 3540 are identical in packaging size so the above feedback is entirely relevant.

[bubbabooga]

I personally had a gt35/82r .82 ex housing on a 25/30 in a cefiro with 4 inch intake pipe and barely had to trim the engine mount side steel part, on rb20 mounts tho as the 33 engine mounts are slightly bigger.

[WARLORD]

are we all talking about the same manifold.....

[wolverine]

I know I am.

[bubbabooga]

Yep cast low mount hks t/s manifold.

[GTScotT]

Well if a 3040 fit a 35R will also fit. Same housings and chra.

[WARLORD]

good luck with it let us know how you go.

[PLYNX]

Thanks for the input and advice guys !

Now Ive gotta find the manifold and go from there.

[WARLORD]

that's not going to be easy it took me about a year to find a good one that was not cracked with a t4,you can find them under $500 to as i did, most want $1000 as they are hard to find.let us know if you want a ceramic coated heat shield as i have one spare.

Edited February 26, 2013 by WARLORD