Jump to content
SAU Community

What Is The Best Swirl Removal Autoglym?

BCNR33GT-R

By BCNR33GT-R,
in Exterior & Interior Styling

 Share

Recommended Posts

GTR-N1 Grand Master

GTR-N1

Posted
Posted

If you're an AutoGlym fan and there aren't many detractors, you can firstly use their Super Resin Polish.

If that doesn't remove them, you can try their more abrasive Paint Renovator followed by Super Resin Polish

Meguiar's has their Ultimate Compound followed by their Showcar Glaze 7

Menzerna has a broad spectrum of polish grades.

Piggaz Grand Master

Piggaz

Posted
Posted

Have used AutoGlym. It's watery garbage.

Try http://www.poorboysworld.com/.

Depending how how bad the swirl marks are use http://www.poorboysworld.com/professional-polish.htm if they are light or if you need a bit more ommph use the http://www.poorboysworld.com/pro-polish-2.htm followed by the first product I listed. Seal it then wax it. Great stuff that poorboys gear is.

GTR-N1 Grand Master

GTR-N1

Posted
Posted

When a product is watery, the emulsion has broken down because the emulsifiers cannot keep the watery component suspended in the oil component or vice versa.

It's likely, that if the product has gone watery, it has endured extended heat - probably even before you bought it.

And the instruction to shake a polish etc, may certainly be not enough to reform the emulsion.

This aspect intrigued me so greatly that I felt compelled at the Meguiar's Tech Night last Thur to ask if their products have a Use-By Date.

BCNR33GT-R Rising Star

BCNR33GT-R

Posted
  • Author
Posted

You've used that poorboysworld stuff Paul?

What happened was I had parked under tree and it started raining.

Then when I went back to my car it has sap all over it so I went and washed it then noticed afterwards that somehow I'd created swirl and spiderwebs, looks terrible on white aswell..

Piggaz Grand Master

Piggaz

Posted
Posted

You've used that poorboysworld stuff Paul?

What happened was I had parked under tree and it started raining.

Then when I went back to my car it has sap all over it so I went and washed it then noticed afterwards that somehow I'd created swirl and spiderwebs, looks terrible on white aswell..

It's all I use mate. If you're in Sydney, feel free to come around and try some.
  • 5 weeks later...
92r32gts Newbie

92r32gts

Posted
Posted (edited)

i have been a car detailer for the last 3 years and i find the best product for swirl remover is the poorboys range...... they have a product called SSR (scrath and swirl remover) 2.5 and thats the best one i have found used with a good quality waffle pad and slow speed on the buff...... you can buy the product from http://www.waxit.com.au/index.php?option=com_virtuemart&page=shop.browse&manufacturer_id=21&Itemid=1

also if your not too keen on using that stuff poorboys also make a product called white diamond....... works wonders if ur car is a light color...... if its dark use black hole........ they are both the same product but one is for light colors and one is for dark........ these are also available from the same website....... if u need anymore help pm me......

Edited by 92r32gts
BCNR33GT-R Rising Star

BCNR33GT-R

Posted
  • Author
Posted (edited)

Hey man thanks for that I got poor boys stuff coming in mail I got the ssr1,exp,polish hope they do the trick haha, do u think I should use a machine buffer? Or can I do it by hand.

Oh we're you located? I'm perth

Regards

Thomas

Edited by Turbo tommy
junkie Mentor

junkie

Posted
Posted

You need a machine for any decent swirl removal. Can be done by hand but will take forever and your arms will probably fall off after one panel...

I've never tried the Poorboys gear but hear very good things about it. If you have the cash, get a random orbital machine and some decent foam pads, then jump on youtube for how to videos. Junkman2000 has an awesome 5 part tutorial for beginners, very clear and easy to follow, his channel is here: http://www.youtube.com/user/Junkman2000

  • 2 weeks later...
jase_c Collaborator

jase_c

Posted
Posted

+1 for the poorboys. I use the ssr 2.5 followed by the ssr1 and a random orbital with the orange foam pad for the 2.5 then a white pad for the 1 and let the machine do all the work don't use a lot of pressure. Finish it with the white diamond like 92r32gts said.

BCNR33GT-R Rising Star

BCNR33GT-R

Posted
  • Author
Posted

You's are mad lads cheers for the help, although it's been raining non stop here in Perth and I can't even clean it haha, I also got a quote from someone to do the job quote was around 900$ for the car I told him to stick it lol

junkie Mentor

junkie

Posted
Posted

$900 is pretty nuts, that would be a full on top end job. Justified for some cars of course, but you would be better off getting some good gear and learning to do it yourself. Plus, you can make some extra scratch on the side by doing the odd car here and there for friends and family

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      Noice. Mostly.
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      Yuck. But it's kinda the same principle, moving timing around to make car run bad but sound good.... I went for a more spirited tuning drive to iron out a few things. Car no longer stalls, and it loved to dip RPM low when you clutch in. After tuning this (and the 4-5 tables that HPTuners/LS1 OEM ECU wants for idle air correction) it's now behaving somewhat normal. All expected because there's a new TB, new Intake manifold and that new TB which is 102mm vs 78... has an entirely different IAC passage which is smaller because ????? Unfortunately at this point I went to make further fine tuning changes to avoid it flaring up, you know... _tuning_ the HPTuners dongle died. Well to be more accurate - The USB cable died in a fashion that anyone who has ever charged a phone will recognize. After the app demanding I resync it 50 or so times (which all 'succeeded' but all failed) the device does not want to sync and I've logged a ticket with support to see if it's fixable. US Support said it was a 'storage issue' but after removing the SD card inside it and formatting it/fixing it the issue does persist. Unfortunately usually the fix is "Turn in your old dongle and pay $700 for the upgraded one" it's cheaper because I get some free licence credits I unfortunately don't need. However I'm 10 minutes down the road from HP Tuners AUS/VCM so at least I won't need to post it, and logged a new ticket for support over here. Definitely drives different. My SOTP dyno believes it's probably making 310-320kw instead of the 280 before.  It scrambles for traction a little now whereas it previously different. It drives like a bigger cam car up top even though the cam is smaller, likely due to the cam not being advanced 6 degrees. The timing is deliberately low and the fuel is very rich so who knows if this will improve on the dyno. It may, imperceptably. Also funny is removing the pineapples definitely makes the car squat more and axle tramp less. So this behavior of having more top end, squatting more, and scrabbling for traction more makes me think = more power. But I could have just been sitting on the threshold of that kind of behavior before. Time will tell if my butt dyno is calibrated right. I need the exhaust leaks fixed before dyno tune for obvious AFR related reasons - I repositioned the pipes but I'm not confident it's fully sealed even if it is better. At least the car does drive around while I cannot tweak/tune it for now. And I have aircon again. medium success!
    • GTSBoy
      I need more than help to finish my R33

      By GTSBoy · Posted

      Don't use that manifold. Please don't use that manifold. Sunk cost fallacy is not worth the later pain. None of these will be relevant to the change that will come from the different turbo and manifold. As in, the effect of the exhaust will be nil, regardless of what else is changed. And all the cam and fuel system stuff is not changing either way, so has no effect. The turbo and manifold (and to a small extent the wastegate)....big change.
    • marni
      I need more than help to finish my R33

      By marni · Posted

      Just wanted to say thank you for your input   my man (lead mechanic by trade) and I have done a heap of work as you can imagine just to make the hot side work with the dump pipe, stupid massive intake on turbo, trying to get the waste gate on was not fun.  I’m kinda getting to the point where I don’t know if I try and make this work and not throw all this cash and time away or do I scrap the lot and start again? the Apexi I’ve got was tuned for a few slight differences:   Tomei pon cams (mine are stock neo) Turbo smart 38mm external waste gate (mines 45mm replumbed) with stainless screamer pipe  3inch turbo back exhaust with high flow cat Sard 800cc top feed injectors Sard adjustable fuel pressure reg    
    • joshuaho96
      My BMW 335i

      By joshuaho96 · Posted

      Out here E90s are the cheapest way into a sporty-ish car because everyone knows just how expensive the repairs can get. 8-10k USD for an automatic 335i. 
×
×
  • Create New...