Jump to content
SAU Community

What Is The Best Swirl Removal Autoglym?

BCNR33GT-R

By BCNR33GT-R,
in Exterior & Interior Styling

 Share

Recommended Posts

GTR-N1 Grand Master

GTR-N1

Posted
Posted

If you're an AutoGlym fan and there aren't many detractors, you can firstly use their Super Resin Polish.

If that doesn't remove them, you can try their more abrasive Paint Renovator followed by Super Resin Polish

Meguiar's has their Ultimate Compound followed by their Showcar Glaze 7

Menzerna has a broad spectrum of polish grades.

Piggaz Grand Master

Piggaz

Posted
Posted

Have used AutoGlym. It's watery garbage.

Try http://www.poorboysworld.com/.

Depending how how bad the swirl marks are use http://www.poorboysworld.com/professional-polish.htm if they are light or if you need a bit more ommph use the http://www.poorboysworld.com/pro-polish-2.htm followed by the first product I listed. Seal it then wax it. Great stuff that poorboys gear is.

GTR-N1 Grand Master

GTR-N1

Posted
Posted

When a product is watery, the emulsion has broken down because the emulsifiers cannot keep the watery component suspended in the oil component or vice versa.

It's likely, that if the product has gone watery, it has endured extended heat - probably even before you bought it.

And the instruction to shake a polish etc, may certainly be not enough to reform the emulsion.

This aspect intrigued me so greatly that I felt compelled at the Meguiar's Tech Night last Thur to ask if their products have a Use-By Date.

BCNR33GT-R Rising Star

BCNR33GT-R

Posted
  • Author
Posted

You've used that poorboysworld stuff Paul?

What happened was I had parked under tree and it started raining.

Then when I went back to my car it has sap all over it so I went and washed it then noticed afterwards that somehow I'd created swirl and spiderwebs, looks terrible on white aswell..

Piggaz Grand Master

Piggaz

Posted
Posted

You've used that poorboysworld stuff Paul?

What happened was I had parked under tree and it started raining.

Then when I went back to my car it has sap all over it so I went and washed it then noticed afterwards that somehow I'd created swirl and spiderwebs, looks terrible on white aswell..

It's all I use mate. If you're in Sydney, feel free to come around and try some.
  • 5 weeks later...
92r32gts Newbie

92r32gts

Posted
Posted (edited)

i have been a car detailer for the last 3 years and i find the best product for swirl remover is the poorboys range...... they have a product called SSR (scrath and swirl remover) 2.5 and thats the best one i have found used with a good quality waffle pad and slow speed on the buff...... you can buy the product from http://www.waxit.com.au/index.php?option=com_virtuemart&page=shop.browse&manufacturer_id=21&Itemid=1

also if your not too keen on using that stuff poorboys also make a product called white diamond....... works wonders if ur car is a light color...... if its dark use black hole........ they are both the same product but one is for light colors and one is for dark........ these are also available from the same website....... if u need anymore help pm me......

Edited by 92r32gts
BCNR33GT-R Rising Star

BCNR33GT-R

Posted
  • Author
Posted (edited)

Hey man thanks for that I got poor boys stuff coming in mail I got the ssr1,exp,polish hope they do the trick haha, do u think I should use a machine buffer? Or can I do it by hand.

Oh we're you located? I'm perth

Regards

Thomas

Edited by Turbo tommy
junkie Mentor

junkie

Posted
Posted

You need a machine for any decent swirl removal. Can be done by hand but will take forever and your arms will probably fall off after one panel...

I've never tried the Poorboys gear but hear very good things about it. If you have the cash, get a random orbital machine and some decent foam pads, then jump on youtube for how to videos. Junkman2000 has an awesome 5 part tutorial for beginners, very clear and easy to follow, his channel is here: http://www.youtube.com/user/Junkman2000

  • 2 weeks later...
jase_c Collaborator

jase_c

Posted
Posted

+1 for the poorboys. I use the ssr 2.5 followed by the ssr1 and a random orbital with the orange foam pad for the 2.5 then a white pad for the 1 and let the machine do all the work don't use a lot of pressure. Finish it with the white diamond like 92r32gts said.

BCNR33GT-R Rising Star

BCNR33GT-R

Posted
  • Author
Posted

You's are mad lads cheers for the help, although it's been raining non stop here in Perth and I can't even clean it haha, I also got a quote from someone to do the job quote was around 900$ for the car I told him to stick it lol

junkie Mentor

junkie

Posted
Posted

$900 is pretty nuts, that would be a full on top end job. Justified for some cars of course, but you would be better off getting some good gear and learning to do it yourself. Plus, you can make some extra scratch on the side by doing the odd car here and there for friends and family

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Cleaning my wheels 😍

      By GTSBoy · Posted

      Yeah, my moulds and seals are 32 years old now. I think I will continue to not use a pressure washer on it.
    • Shoota_77
      Cleaning my wheels 😍

      By Shoota_77 · Posted

      I hear the old "I'd never use a pressure washer on my motorbike" BS in the dirtbike community too.  The only people that have had a problem from using a pressure washer on anything are the people that aren't using them properly.  If you hold the wand any more than 45 cms away from pretty much anything (radiators, wiring connectors, paint, etc) you aren't going to cause any damage.  We've had detailers wreck moulds and seals on cars at work before and the only reason why is they held the pressure washer too close and on the one spot for too long.  If you have 5% more brain power than a detailer then you know not to not do that and you'll never have a problem.
    • Shoota_77
      Shoota's R33 GT-R RB30/26

      By Shoota_77 · Posted

      I'm pretty much healed up post surgery so I spent another almost full day out in the shed re-arranging everything to make room for all of the shit that I've taken off the car.  I need to get everything off the floor and away from the car for when I start making a massive mess stripping off the remaining body deadener and then for the the painting process.  Almost got the shed to a point now where I feel I can actually start working on the car again (clean shed clean mind or something!).  Almost 11 years of accumulated car parts, building supplies, tools, junk, etc have taken a long time to get in some sort of order again!  Most stuff is now boxed up and in the back shed if it's not car related.  Most people would still be horrified walking into my shed but it's significantly better than it was before!   For those that saw my separate post the other day, yeah I ordered one.... This version- I convinced myself to stop being a clown, wake up to yourself and realise it will take you 5 weeks to make one by which stage you're over working on the car again...  Maybe I am getting on top of my "mental ailments" and making smarter choices.... $1450 delivered which will take my miserable half-dutch arse a few days to get over having spent that much!  If I don't have a use for it straight away after my car is off it I might even see if there is a "rental market" for them.  See if anyone wants to hire it for a period of time.  $25 a week or something like that.  I'll worry about that when my car is actually ready to come off it though as that might be a while away!! There's now no excuses now for not ending up with an underside you could eat off! Away for kids sport the next few weekends so hopefully can get the rotisserie assembled ready to go for the car to go straight on it the next available weekend.    
    • The Bogan
      Cleaning my wheels 😍

      By The Bogan · Posted

      I always use my Karcher, but it's only a little one that I picked up from Supercheap  The only issue I ever had with a pressure washer was when I was a kid cleaning coaches, they had a hi-po industrial sized petrol jobbie that would strip paint if you got to close I saying this, we have a fairly high power washer at work with a diesel powered heater that sprays water at about 60°c, it works great for removing old wax and road grime on the underbody after some foam cannon action, albeit from a "stand off" distance of a few feet
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      Sorry no - The sandtrap adventure ended the day, happened at the end of the last session. At that time I wasn't hearing any weird noises nor were the brakes shuddering anymore. It was only when watching the videos that I remembered I had these sounds early on!
×
×
  • Create New...