Jump to content
SAU Community

Recommended Posts

Hey Guys,

getting ready to start modding my 250GT sedan, not sure what to begin with any ideas?

Feel free to post Mods you've done on your V series Skyline!

Thanks Guys

  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

I thought we started answering that question in your previous thread?

http://www.skylinesaustralia.com/forums/topic/420070-performance-chips/

I don't think anyone has modified the DD to a great extent, most guys would have gone for the 3.5 manual as a performance base. Would you like some pics of the swirl valves I believe hinder power production? I could possibly supply you with a modified runner if you wanted to give it a try, but you will need an Emanage Ultimate or similar to realize any gains.

Shame you are so far away, I could help with most of the performance mods required, even the Stagea turbo manifolds could bolt up for high compression e85 turbo fun. ;)

GM = General Motors.

LS - a series of V8 engines produced by GM ranging in capacity from 4.8L to 7.0L

T56 = 6sp manual transmission built by Borg Warner, often used on the above engines.

Anything can be done with enough $$..

Edited by sonicii

Nothing much man EGR valve blocks plenums mods, can be modified but car will not like it. Vq25DD is not a performance engine it is a economy orientated engine with slight but of grunt. There maybe some things they made for the VQ25DD enhine in the stag but not much and good luck. Im doing a engine conversion on my 250GT later this year.

If you want power get a VQ35 f**k the RE4/5 auto box out and replace it with Z33 manual and replace hat gay open diff with the R200 V VLSD from a manual 350Z....then its endless mods man.

Oh btw VM35AU facebook page join it

Still a weak ass engine though.

The VQ30det is good for well over 400kw stock.

I prefer the 4 door personally, not because it looks better, but because it's unassuming. You would never get pulled up in it, unlike the coupe. There are too many down here with blacked out tail lights and bald 20 inch rims. You are ruining it for yourselves.

looks like your trying to mod the wrong engine, as most of the boys above have already said. motor in the bin, 2J in. Has that even been done before?

Been done

Google is your friend.

G35 2jz

Coupes are still very unassuming to the local constabulary compared to your usual suspects like Silvia, evos ect

Personally Don't really care about everyone else not looking to be a traffic light hero and coupe looks a lot less maxima like.

Plus any crazy conversion is retardedly hard to get legal in most states

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Me, I would happly spend some more coin on better tyres for my street car  Will they work, yes, of course, but why substitute some dry grip/braking distance, and wet weather grip/braking distance on what is really old tech to save some coin on your "precious" street car In the end it might not be you that farks up, it's the thousands of other idiots on the street that you need to worry about  For a street car that gets some "fun time", I have found that a quality tyre that can handle dry, wet, cold (Canberra gets pretty cold) and hot conditions, which may costs a little more, is great insurance  From my experience with them (driving around Goulburn in the winter) the RE003's are pretty poor in cold and/or wet conditions on the street If RS4's didn't hate gripping in the cold I would be running them always on the street,  great in the dry, OK in the wet, but, they do hate the cold, with a passion, I run PS5's year round now, basically, I've found the PS5 to be a great year round street tyre for all conditions, they last well, and are mid range pricing wise TL;DR. Tyre choice is probably like what brand and grade oil you should use, ask 10 people, and get 10 different answers... LOL
    • Extend the sensor out of the car, put it in a pot of oil, heat oil up. You'll get to 80-120 then 😛
    • Yeah - I tried throwing the formulas from ChatGPT and it tried it's best as it told me that the Formula in HPTuners as requested is a Linear function, but the original data I provided it (resistance to temp) is not linear and thus it kept trying to suggest formulas that would be more accurate in regions I actually want it to be accurate in. But I didn't quite understand it at the time. I have now thrown the data into graphs and can clearly see they're all different shapes. Given it's an oil temp sensor I probably want it to be most accurate between 80 and 120c - So I don't really see much alternative other than driving the hell out of the car and letting it cool down from 120C, noting the voltage on the sensor as it chills out. But at that point if I write it down, well, I'll be able to know this from the voltage. Would look pretty stupid on a datalog or a video showing me going down the straight at 0.265V Oil temp 
    • Yeah, it looks like it's being ran as a constant current setup is my guess. Get some more data points, reading the degrees C on the gauge, and what the voltage is you're seeing out of it. The sensor itself is not linear, even in smaller ranges of like 20 - 60 it's non linear. But if we can get some good plots, particularly at those 5volt steps, it will be very easy to work out, and then I can give you a logarithmic formula if its you need an actual formula. Also, very likely ChatGPT will lead you astray with some of this stuff, as it totally depends on how the circuit is built.
    • So to further complicate things or hopefully explain better: This is a VDO sensor. It clearly does this math inside the gauge itself... because it displays a temperature in C to me instead of a voltage. The signal wire to the gauge is in Volts, not Ohms. I have just teed into this and sent it to the ECU. ChatGPT spat this out: Temperature (°C) Thermistor Resistance (Ω) Voltage Output (V) -40 36563.56 4.973962698 -35 26284.63 4.963854097 -30 19149 4.950518086 -25 14127.68 4.933166097 -20 10504.68 4.910527969 -15 7721.35 4.879055954 -10 5720.88 4.838133512 -5 4284.03 4.786165799 0 3240.18 4.721119717 5 2473.6 4.640900563 10 1905.87 4.543692515 15 1486.65 4.429695182 20 1168.64 4.296344225 25 926.71 4.144091368 30 739.98 3.972492431 35 594.9 3.782907287 40 481.53 3.577860996 45 392.57 3.361217186 50 322.17 3.136573398 55 266.19 2.908608143 60 221.17 2.68039363 65 184.72 2.455599277 70 155.29 2.239608872 75 131.38 2.035132288 80 112.08 1.846579676 85 96.4 1.674774149 90 82.96 1.511882199 95 71.44 1.359001674 100 61.92 1.222169588 105 54.01 1.100403407 110 47.24 0.989775394 115 41.42 0.889528391 120 36.51 0.800974069 125 32.38 0.723478416 130 28.81 0.654148313 135 25.7 0.591893137 140 23 0.536380597 145 20.68 0.487551867 150 18.59 0.442640126 155 16.74 0.40213318 160 15.11 0.365841848 165 13.66 0.333073247 170 12.38 0.303758956 175 11.25 0.277572169 180 10.24 0.253917873
×
×
  • Create New...