Jump to content
SAU Community

Recommended Posts

i've managed to grab a few kits from japan for myself and a few friends, i bought some extra ones because half the time they are never in stock at nissan japan.

soo i have a few kits for sale.

These drop right into r33 gtr, direct no mods and fit r34gtt's(someone confirm this) r33 gts25t's with a slight mod to the accel. pedal (theres a metal support piece that needs to be cut cause the pedal is alumimnium now not rubber so its not needed)

They work with r32 but the dead pedal housing is slightly larger on r32 so there is a small gap when replaced with r34 dead pedal. This can be fixed by purchasing r33 or r34 dead pedal housing and installing that in place.

1xBNR34 Pedal Bushing
1xBNR34 Pedal Bushing
2xBNR34 Clutch / Brake Pedal Cover
1xBNR34 Accel Pedal
1xBNR34 Nur Pedal Cover
$200 plus shipping from canada which i believe is around $20 for airmail with tracking ill double check tommorrow
Also i have a stock air box that i know some of you guys neeed/want them..... i dont know what they are worth over there but ill update price in a few mins
fastest way to contact me is via email [email protected]
975aa0a6-511e-4cdc-b47e-1062d1fe9318_zps
DSC_0060.jpg
DSC_0061.jpg
Edited by cooke24
Link to comment
https://www.sau.com.au/forums/topic/420653-r34-gtr-vspec-nur-aluminium-pedals/
Share on other sites

I'm like 100% sure it's the same deal as the gts25t just have to cut metal support that would support the rubber pedal on the accelerator. Which is no longer needed because the new pedal is solid aluminum

Shipping from Canada is $20 takes 2 weeks and unfortunately not tracked. I have a lot of interest but so far no one has sent payment. I only have a few so get yours quick

There are other shipping options with tracking but twice as much

  • 2 weeks later...
  • 2 weeks later...

I dont see how these dont fit, just take off your pedal, there's like a c clip and holds the rubber to the metal bit, as long as it's L shape, it will be able to use these pedals (they come with the bushing to make them fit 100%)


I have these on my s15 as well so i would imagine it would fit most nissans

Sold out. Can order more. More I order the cheaper they get. We can start a group buy that will not end up like the last one.

I have a verrrry reliable source in Japan. I will need at least 5 and could probably do $180 posted over 10 I will check

Who's in ?

1.

2.

3.

4.

5.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 49719 is the cooler loop. Right at the front, LHS of that diagram. Return line from rack (LP side) goes to cooler loop on RHS front of car, then back under engine and returns to bottom of tank. 49717M is feed from tank to pump. HP line out of pump is thick rubber, followed by the hard line that runs down to crossmember and runs in parallel (but opposite flow direction) to the LP return line. Nothing goes anywhere near the firewall or interior of car. The closest they get to that is the connections on the rack.
    • Thanks, plan is to drain all fluid tomorrow and do smoke test to find out the leak.   Appreciate your help and want to understand how the system work. So cooling is achieved by the long loop not any rad? The diagram seems to suggest it connects to somewhere inside the cabin and I thought that is a cooler inside firewall. If you look at the diagram it seems to show it connects to something inside firewall. I tried chasing it but not easy unless I take loads off   i am confident pump is good as fluid goes in and it gets soft( steering) but as soon as I turn engine off , loads of bubble come to surface and overflow. When engine is on , fluid level is below minimum but when off it shoots off and thinking it is sucking air in. I suspect aluminium pipe may have a crack line or whole   smoke test with no fluid should be a good start and if needed will remove the pump   In addition, the one going under the engine bay is high pressure line and one directly connecting from pump to resorvoir is return/ low pressure?   finally I searched and suggestion is to use dexron 2 but that is discontinued so bought dexron 3 as all research suggest it is compatible and shouldn’t cause any issues/ blow seals. I bought two liter of dexron 3 motul atf
    • Don't worry about. Just don't try to drive hard enough to make boost and you'll be fine.
    • Yes. This has already been said. It is a loop of hardline in front of the radiator. Because.... the pump is on the LHS and the steering rack hydraulic connections are where they always are on a RHD steering rack....on the RHS. The high pressure line goes down under the engine, along the crossmember, like it does on all Skylines. Don't just throw expensive braided hoses/other kits at it. Work out what is wrong and fix that.
    • Still got the afm on the intake, clamps are shut tight, only loose hose is the one that goes from the j pipe towards the IACV, since it's next to impossible to find a factory hose and the barbs are different sizes (I'm still using clamps on this hose to try and help it seal on the iacv side) I've ordered parts to make up the hotside of the intercooler pipes, I'll plumb it in and see what happens in a few days I suppose The turbo's internally gated, can I just unscrew the tension rod to let the gate open?
×
×
  • Create New...