Jump to content
SAU Community

R33 Gtr Shell And All Parts For Sale Again, Also Lots Of Aftermarket Parts


Recommended Posts

hey guys


selling off my project car r33 gtr i only really just bought it but have moved onto an r35 haha.. cant afford both, especially with r35 parts being as expensive as they are.


ALL PARTS LOCATED IN MACKAY NTH QLD, POSTAGE CAN BE ARRANGED


I CAN ALSO POSSIBLY TRANSPORT THE SHELL TO BRISBANE OR NEAR THERE PROVIDED I HAVEN'T SOLD THE WHEELS OR ANYTHING ELSE TO MAKE IT DEMOBILISED!! WILL ALSO NEED A MONTHS NOTICE AS ITS A 1000KM DRIVE AND NEED TO ORGANISE A TRAILER OFF MY MATE..


R33 Gtr mnp shell it is complied and DID have rego a couple years ago (nur33's old shell) - $1500


  • Front windscreen cracked
  • Stripped interior, not one bit of wiring harness front to rear
  • Front guards modified as per picture
  • Custom dash reo bar made
  • Custom alloy dash made
  • Sound deadening partially removed - just the stuff i could get with dry ice.. Some still baked on like around the gbox tunnel
  • Front radiator support cut out - was planning on welding a couple tabs to it then bolting it back on via the tabs
  • Lower front chassis brace cut out and replaced with a piece of tube to give the radiator more room and be able to have the intercoler sit upside down and have its inlet and outlet very close to the intake mani and turbo for short piping.
  • all fuel and brake lines have been removed
  • aerocatch bonnet pins
  • led taillights
  • will throw in the whole car loom and all ecus that i have.. loom is cut in a few spots and one ecu is damaged.
  • NO DIFF!!


additional parts to suit.. if you buy the shell the below parts will come at a discount depending on what it is you want.



  • r33 gtr BC External Reservior coils, as new only fitted and moved 50metres - $1350
  • r33 gtr black oem front bar, good condition paint is scratched a bit - $500
  • r33 gtr/gtst greddy front strut brace - $125
  • r33 gtr carbon fibre grill with no symbol just mesh - $100
  • r33 gtr rear wing, carbon end caps - $350
  • r33 gtr front lights very good condition - $350
  • r33 gtr/gtst cusco hicas lockout bars very good condition - $250
  • r33 gtr cusco front swaybar - $250
  • r33 gtr moonface racing castor arms - $200
  • r33 gtr passenger seat, good condition - $250
  • r33 gtr front drive shafts - $400
  • r33 gtr rear driveshafts - $500
  • r33 gtr front propshaft - $150
  • r33 gtr main propshaft - $300
  • r33 gtr rear strut tower/boot bracing, not the bar that goes from tower to tower but the bracing that bolts to the strut tower and boot floor - $150
  • r33 gtr bonnet, mnp with genuine uras bonnet vent - $450
  • r33 gtr interior panels, have a whole bunch of them, pretty much only threw out everything in the back half of the car and the dash - not sure what condition it is all in these days so if you want something i will have a look and see if its there then get back to you with a price.

Aftermarket Stuff


  • GTR Trust Drag intercooler 600x300x150mm, VGC, part of the end tanks chopped off for the different orientation i was planning while running it upside down - $1900
  • Stack 8130 dash - excellent condition has all loom, oil pressure and one temp sensor.. needs one more temp sensor to complete it - $1450
  • Full Set r34 gtr standard brakes with slotted front and rear rotors, rotors have been painted to keep rust off - $2000
  • AME TM-02 wheels, 18x10+15 all corners on 1000km old achillies 123s semis 265x35x18 - all very good condition no gutter rash - $2300
  • rochester 14mm 1200cc injectors x 4, never been used only fitted - $400
  • buddy club fixed back seat, has rail to suit s13/4/5. black with grey inserts for a normal sized person, has a small tear in the fabric other than that its as new - $450
  • sr20vet mazworx lhd or RHD without brake booster intake manifold, no fuel rail as new condition just needs a throttle cable bracket welded on - $500
  • s13 whiteline front swaybar good condition - $125
  • S14/15 K.L.S camber arms - $85
  • 2jz exhaust manifold 3d flange ready to make a manifold - $100



thats it for now..


please contact me (spencer) on 0413347774 or via pm
Link to comment
Share on other sites

as requested, a picture of the bonnet. only one i have thats half decent.. i can get some better ones on the dslr tomorrow if you want? bit dark atm

also has aerocatch bonnet pins fitted now instead of the ones pictured and forgot to mention the n1 lip

DSC_0001-1.jpg

Link to comment
Share on other sites

Hey

So far the rear driveshafts are gone and front bar, had intrest in the suspension and most likely sold the brake master cylinder.. Other than that it is still how it looks in that picture minus the autoselect lip..

Send me a pm and we can work a price out depending on what you want to come with it..

Link to comment
Share on other sites

  • 2 weeks later...
  • 3 weeks later...
  • 6 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Hey man Thank you! Excited to be here Mostly 4 doors ER, HRs not much of 2 doors, I personally know 3 guys that have coupes And yeah, they are some BNRs, BCNRs, not that much left, some of them went to EU.   Thanks, actually the conversion was done by previous owner, I wanted to get it even when it was 20DE AT cause the chassis was taken care well but getting it with MT turbo wasdefinitely an additional pleasure 😃   
    • Hey guys   I'm pretty sure this question was asked before, I had an HR34 before, got another one again and I never gave much attention to this but wanted to ask you guys about dropping or pushing bonnet problem. ER, HR got pretty heavy steel bonnets, I'm sure S chassis and other R chassis gens also got heavy bonnets. I used to push it after I gently put it down on the latch but I saw some videos guys dropping it from 30-40 cm and some say it's more reliable way to make sure it's safely closed. I let it drop a couple times from like 30-40 cm and it's locked no problem but it gives me that bad OCD feeling after that that something is damaged lol, the bonnet rubbers is there, guess they handle that little fall energy well and the latch itself is what stops the bonnet right?  Talked to other Skyline owners, some say both methods are fine, some against dropping it by any means, some drop all the time no problem. So I'm like confused if I was doing it wrong or not and if I already messed up something. ...and jealous of my friend's Z, dropping aluminum bonnet feels so much right and better haha    
    • Hi Jay! Welcome to  ! Are there many Skylines over there? Does the ---> mean you have converted it to turbo and manual? Very cool.
    • Hello there 😃 Cheers from Kazakhstan to everyone, got myself HR34, RB20DE AT ---> RB20DET MT   Nothing fancy, mostly stock, had an HR34 before but the goal was finding a rust free one (impossible), but this one is definitely cleaner than the last one 😃    
×
×
  • Create New...