Jump to content
SAU Community

Recommended Posts

Hey guys,

Having a problem with my R33 series 1 running rich for for 30 secs to a minute every time i start it wether its cold or hot/normal temp.

Ill try give as much detail as possible

car has stock air box,stock exhaust,power fc,550cc injectors,,FMIC,Z32,YJ coilpacks and new set of plugs bcpr6es gap .8 and also tryed bosh platnums 1.1 and stock boost now.

first off i had this car with facefoward plenum and was running sweet with all the stuff above mentioned done but got defected so went back to all stock intake plenum/runners/bov and emissions which was the only thing put back on.

Everytime now i start it just black smoke all the time no matter wat temp its on and does it for awhile then clears up.

mechanic checked fuel pressure/FPR all great perfect...afm been cleaned,panel filter cleaned plugs new,coil packs good but still this happens.

also cleaned aac valve which helped with the hunting up and down.

Thought maybe leaky injector but all these things mentioned was not doing at all with them on with the face foward greddy type plenum.

Mechanic said could be that plenum holes smaller now and has afected its air fuel mixture and making it run rich but its not running all the time rich just as i have said.

What u guys think,might need a tune or something else,any help would be great.

Link to comment
https://www.sau.com.au/forums/topic/420796-running-rich-on-every-start-up/
Share on other sites

only three things have been changed,the plenum,stock bov from aftermarket one which is plum back style i had on before and the intercooler pipe throttle body side,thats it.

not to sure if the PFC has post-start enrichment.Full throttle is good but just down low is a lil rough sometimes but the start up everytime is terrible just black and black and clears up after awhile.

maybe someone can tell me some step adjustments on the power FC for what to do for the start up??

Edited by RamR33

did you have to remove the injectors when you swapped plenums? if so, i'd say you have a damaged o-ring on an injector. definitely not something you want to keep driving with, because if it gets worse then you might be up for a new engine (i know a guy who had an o-ring let go on his built s13 and it resulted in a hole in the side of his engine.....)

for the sake of a few dollars for new o-rings i'd be pulling the injectors out and replacing them. possibly even have the injectors professionally cleaned while they are out

The injectors wernt removed but noticed as soon as i took that crap stock exhaust system off it ran 100 times better with my 3inch and less smokey as the tune before that i had with my power fc was made for all aftermarket mods and since putting the exhaust and pod filter back on performance is way smoother and less smokey so most likley the tune is the problem.....

The injectors wernt removed but noticed as soon as i took that crap stock exhaust system off it ran 100 times better with my 3inch and less smokey as the tune before that i had with my power fc was made for all aftermarket mods and since putting the exhaust and pod filter back on performance is way smoother and less smokey so most likley the tune is the problem.....

Oh really?!

Yes it runs heaps better.

The idle seems to run around 200rpm rpm higher now after exhaust was put on so could to with an adjustment but as for black smoke nothing like before ,puff puff puff on start up.

Had a read on here some ppl saying when clearing defects with there moded 33,s there car runs and goes like crap with the stock exhaust.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That ring thing is interesting how it's holding everything together 
    • Hey guys. I have a 400R on its way to Australia from Japan currently and have a few questions I’m hoping others may be able to help with.   Wondering if anyone here has had any luck getting the Sat nav unit to work in Australia!? Assuming the Stereo is as simple as a band expanded and tv won’t work?  Seeing as they’re based off a Q50 which is Aus delivered is there any way to link that system to the nav? Nav modules and head unit are different part numbers and appear slightly different at the rear with plug ins etc. can I put my xtrail sd card into the rv37 and will that convert the maps or update to Australian? Has anyone got any advice here?     also has anyone fitted the factory remote start and Security system once it’s landed in Australia? I put an enquirey to Nissan Japan in via a third party, and they suggested it needs a Nissan Japan dealers device to setup and couldn’t guarantee if one here could do it or not. They can supply and I can physically fit it but to setup I would need a dealers device. Any information here would be appreciated also. I’ve seen one here with it fitted already prior to leaving Japan at a dealer/inporter, so clearly passes compliance and works when fitted Japan and doesn’t need changing here.      also, does the tyre inflation sensors work here? Does anything change with them when the vehicle arrives? Where are they actually situated? I’ve read they have batteries and they need to changing at times and seems like resetting involves the nav system?    any help here would be appreciated and any other aust specific information to help would be great. Looking forward to see what the current generation skyline is like and eager to see how many of the gadgets can be utilised here.  Thanks in advance 
    • Do need to take it with a pinch of salt. One of the adapter failures, they clearly had setup issues with the flywheel.  One of the slipping ones I spoke to and it was pretty clear the throwout was riding, rather than fix, just swapped to a new clutch.    These clutches are being put in anything from 5k offroad 4x4 beaters, GR yaris, 500hp commodores to 1200hp barra monsters. Bound to be some issues in some of them when they are not a simple bolt in affair due to the changes in height.    There is a lot going on in this picture and unless I did the job myself no way to tell what really happened. 
    • I did this mod in 2019  You just have to modify the top bracket of the ABS/TC/Fuel Pump Control ECU so it sits more upright and closer to the back seat and run a good quality positive battery lead from the engine bay, the negative lead i just bolted down to the body in the boot.
    • Damn... Not the feedback I want to hear.
×
×
  • Create New...