Jump to content
SAU Community

Recommended Posts

Ok guys I know it's short notice but what say we get a few people down to Wakefield Park Raceway which is near Goulburn in NSW (halfway between Canberra and Sydney) on Saturday the 5th of June.

The track has had two cancellations so both days of the weekend are drive days (ie anyone off the street can come) but the Sunday has been advertised for a month or so. Saturday has not so it will be hopefully fairly empty and we can have lots of fun.

Cost is $80 per driver and you have to have a Wakefield license which costs $40 for a year. (Some of you will already have these.)

It's good clean fun and if anyone is thinking about going but has never been before, as someone who has only been to two I can definitely say that you will have fun no matter what skill level or modification level you have. A Skyline with no modifications at all and just normal street tyres will still be heaps of fun and there is no embarrassment in being slower than a Hi Po GTR cos most of us are. :(

You need a helmet but you can hire one at the track for $20 ($50 refundable deposit), long sleeve cotton shirt (it's going to be cold anyway), and long pants.

Post up you interest and get you friends involved.

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/42083-wakefield-park-5-june-80/
Share on other sites

  • Replies 71
  • Created
  • Last Reply

Top Posters In This Topic

I thought part of dutton is held at wakefield park on the saturday..

I was gonna head down on the sunday for a track day but decided that study would be a better option as I have an exam on that week...

We should get the team trackday of old reassembled for a EC day! Start saving for brake pads and tyres people!

woohoo... go dutton go dutton... I'll have the pulsar, but would have loved to... why is there so many motorsport activities on at the one time???? so many clashes!

(sorry to hijack your thread adam!)

http://www.wakefieldpark.com.au/site/frameset.cfm

Does this help anybody?

CS_180. No half days. you turn up anytime, pay $80.00 and drive(well few other things happen too). You turn up late, you get less time




  • Similar Content

  • Latest Posts

    • From the pictures I have when doing the job the flywheel is the same diameter, I don't think they're playing weird tricks like putting weights at the outer diameter to increase flywheel inertia or anything like that. The OEM flywheel is definitely heavier, but it's not a huge difference. Quoted weight savings of the clutch is 2 kg so I can't imagine the flywheel being lighter than ~7 kg. Kind of regret not weighing it before the clutch went into the car but as far as driveability goes I have no complaints.
    • HKS trigger kit should be very easy to integrate with a Link. It's a 36-2 crank trigger. Hard part is finding the motivation to take off the timing belt and everything on the front of the engine to install it. You also need to cut out a hole in the oil pump housing so the sensor can read the trigger wheel. Changing out the cam sensor for a 24 tooth setup is probably good enough but as others have mentioned depending on what underlying assumptions are changed it becomes more of a problem. Reading the crank state off of the cam is an abstraction that works in the general case, but if you have an edge case it makes less and less sense. There is a GTX2860 gen 2 that can take a compact 5 bolt housing so it's direct bolt on but I'm not 100% sure of what's involved. Peak compressor efficiency drops off a bit on these turbos vs -5s, 77% vs 73% but you get way, way wider region of operation. The -5s have a really strange surge line in their compressor map that is all over the place. If you think the hot side on the -5s aren't open enough you can try the Tomei T550B turbos which a local tuner seems to be happy with:
    • i need a complete tail light for my R33 GTR if you have please let me know.
    • I need a great maintenance workshop around Idaho, if you know one please let me know..
    • Hello friends, i have a good friend in Canada that looking for a good condition 1993 GTR around him please if one or know someone around you that is willing to let it go please let me know so that i can inform him.....Thanks
×
×
  • Create New...