Jump to content
SAU Community

Recommended Posts

Hi i left my v35 for holiday for a month and i forgot to disconnect the battery. and when i got back it died.

after i jump start the car my alarm sound suddenly not working now and most of the time when i left the car and use it the next morning it wont start again not because of the battery. I have to disconnect the Positive(+) battery and wait for couples of second and connect it again then its working again.

So my best guess is the immobiliser or alarm system? any idea how to fix?

Link to comment
https://www.sau.com.au/forums/topic/420917-help-my-v35-wont-start/
Share on other sites

I hope you don't mean you are disconnecting your Positive Terminal first? You can cause sparking/shorting out if you do.

??? there is absolutly no electrical difference between disconnecting the +ve or -ve terminal first.

If I need to disconnect the battery to do any work on my car, I usually disconnect the negative terminal for the sole reason of safety. If I disconnect the Positive terminal, it leaves the positive terminal on the battery exposed, so if I accidently drop a spanner between the exposed positive battery terminal and any other metal surface in the engine bay, it will short out the battery and can damage it, or other components.. and at worst, cause the battery to quickly overheat and explode.

By removing the negative terminal, it leaves positive terminal covered with the plastic guard, but even if it didn't have any plastic guard, it also isolates the metal frame of the car from negative side of the battery, so dropping a spanner between the positive terminal and the metal of the car, won't cause a problem.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sounds like the solenoid might be cactus, if the solenoid trigger wire was still attached (and it was just the main power to the starter itself remove). Just to provoke Neil haunting me for the rest of my life... Have you tried tapping it with a hammer while someone switches the key to start? This might work for the fuel pump too... šŸ˜›
    • I need help dealing with an engineer who is massively overcharging me for an engineering report on my modified, written-off Jeep to get it roadworthy. šŸ”¹ Initially, he quoted me $3,500 - $4,500. šŸ”¹ First invoice: $5,315 (already above the quote). šŸ”¹ Second invoice: $1,375. šŸ”¹ Now, he has sent another invoice for $3,100! This is way more than double what I was originally quoted. I feel like Iā€™m being ripped off. Has anyone dealt with something like this before? What can I do? Any advice on how to report him or fight these unfair charges? Would really appreciate any guidance! šŸ™ Am in Adelaide.
    • I dunno man, that VX S with 200,000 k's is still hanging out for 1.5 I reckon the R34 is the better buy, personally.
    • Dang, doesn't even include on roads.
    • Only in a market where OBD was a thing. The rest of the world was quite happy to let the US EPA only affect US cars for quite a while. The* problem with datalogs is that unless you are very familiar with what every trace should look like, on their own and as an ensemble, you can and will see weird shit that can and will lead you astray, not realising that what you are seeing is the normal consequence of various transient inputs. *Really, "a" problem, as there are of course many other problems too. Look, these cars are so bloody simple that if it is missing or stumbling, the obvious thing is to break out the old mental diagnostic list and just go do all the things that you know you should. After proving that the plugs are clean and sound, ditto the coil stalks, coils, loom connectors, etc, and then making sure that there is fuel pressure at about the right numbers (while driving!, not while sitting in the garage free blipping it), then maybe you go looking at AFM voltages, manually testing the igniter, putting a scope on the CAS, etc. Then you're into pulling the injectors for a spray pattern look-see and perhaps a clean, squirting carby cleaner around the inlet manifold looking for leaks, and all the more annoying and esoteric, but still common as muck faults that these things have. I wouldn't ever bother looking at the trims, as they are usually bullshit on these old clunkers anyway.
Ɨ
Ɨ
  • Create New...