Jump to content
SAU Community

Recommended Posts

hello everyone,

I have a R34 gt 4 door in the colour red.
Reason for stripping: no cash or time to complete the car.

Originally bought some time in 2008 as a stock as a rock R34 GT Non turbo automatic.
through out the years it has gone through some minor and major changes:
Manual conversion, R34 GTT box, completely overhauled A-Z not even done 300km on it before the car was to be converted to rb26.

Got a rb26, stripped it apart, and got it rebuilt fresh.

Bottom end:
Eagle rods, H beam, CP pistons, ACL bearings for main and rods, full new sealant kit, top to bottom, every seal replaced.
Has N1 oil pump.

top end: Rb26 head, bought off someone here. came off a drift car, had bigger cams (Greddy, not sure of duration and lift), stronger springs and bigger valves, incl Ti retainers and new buckets w shims, head drain plug on the rear.

fully blueprinted and cleaned. paid over 3k for the head alone.
has tomei 3 layer metal headgasket, arp head studs, blitz 700cc+ injectors

some no name single turbo top mount manifold, and the standard rb26 intake with ITB.

no turbo

The bad: car has Never been started and sat in an underground garage for 2 years.

In that time, it has been broken into and had a heap of stuff stolen, my lovely brand new apexi intake system with the two z32 afm's, power fc, rear castor arms, $400 worth of Service manuals, which included EVERYTHING about the car, electrics,engine, chassi, codes numbers and names and billions more information. plus various other things i really dont remember.

Previous "mechanic" decided it was wiser to cut giant holes into the engine bay to run the IC piping through. By that i mean he cut a giant hole out roughly 30x30cm on each side of the engine bay.....

they broke in through the Front passenger window, so that is smashed.
Other than that, the entire car is still there.

other items on the car: Standard interior no rips or tears or marks, perfectly clean. (besides the millions of glass pieces on passenger seat)

has coilovers, from memory was G1 or G4 brand coilovers, Rock hard cant even sit in the car without getting severe spinal injuries.

R32gtr brake upgrade kit, the Nissan 4 pot front and 2 pot rear, with slotted DBA 4000 r34 Gtt rotors.

Has black 18x8 rims, rubber should be replaced, depending on what you want to use them for .
Have a brand new HKS hi power silent as well. never used, still mostly packaged. with the bubble wrap and some papers.

has carbon fibre bonnet and eyelids, incl Xenon lights with aftermarket ballasts.

the car can be registered, was complied etc, and was regoed till 2011.
But since then, i ran out of funds, and time and space.
so here i am now, wrecking the car.

i would prefer to sell the whole car as is if anyone is interested, would save me from having to take everything apart for stripping.
perfect for a track car, or project, was originally supposed to make it into a Blitz r34 drift replica, but...... No.

car is 90%+ complete, just needs a ecu, oil cooler, front engine bay holes welded up, turbo and the IC piping attached. (has r33gtr intercooler setup)

as a whole i would gladly let the entire project go for $9k ONO

however if nobody is interested in the next 1-2 weeks, just tell me what parts you need and i will list them with a price and you may choose to buy them.

I shall upload pictures tomorrow, plus i can also email/ MMS photos if you wish

contact me on here, or over email/ phone

Ph: 0406168123

Email: [email protected]

regards

Jean






Link to comment
https://www.sau.com.au/forums/topic/421171-stripping-a-r34-gt-4-door-with-rb26/
Share on other sites

I would lime to see some pics if they are available?

Lol was wondering how long until you saw this!

And just on topic, excellent guy to deal with and genuine seller :thumbsup:

hey mat, how you going? long time no hear\see. hows your beast going???

to the topic, sorry guys, i tried getting some pictures today, but was too busy at work so couldnt pop past the mechanics to take pics, but will get them up tomorrow morning for you all.

ok, here are a load of pics i took today, turns out there was a cheap ebay nugget turbo in the boot of the car, so now it comes with a $400 turbo

sorry about the delay

post-74293-0-34192000-1362734617_thumb.jpg

post-74293-0-95186400-1362734915_thumb.jpg

post-74293-0-29777800-1362734920_thumb.jpg

post-74293-0-60281300-1362734925_thumb.jpg

post-74293-0-74251900-1362734930_thumb.jpg

post-74293-0-67450300-1362734935_thumb.jpg

post-74293-0-79924300-1362734941_thumb.jpg

post-74293-0-24850700-1362734946_thumb.jpg

post-74293-0-55781400-1362734951_thumb.jpg

post-74293-0-38599700-1362734956_thumb.jpg

post-74293-0-04004400-1362734961_thumb.jpg

post-74293-0-00499800-1362735033_thumb.jpg

post-74293-0-98823100-1362735037_thumb.jpg

post-74293-0-62561000-1362735041_thumb.jpg

post-74293-0-52019800-1362735044_thumb.jpg

post-74293-0-55094400-1362735049_thumb.jpg

post-74293-0-22934500-1362735054_thumb.jpg

post-74293-0-55621900-1362735059_thumb.jpg

post-74293-0-31372200-1362735064_thumb.jpg

post-74293-0-04073000-1362735069_thumb.jpg

post-74293-0-38440700-1362735074_thumb.jpg

post-74293-0-83455400-1362735080_thumb.jpg

post-74293-0-79742900-1362735087_thumb.jpg

post-74293-0-57104500-1362735092_thumb.jpg

post-74293-0-50573200-1362735099_thumb.jpg

someone is checking out the entire car on sun, but if he or anyone else doesnt buy it within the next week, then its Bits time.
so for the dead pedal, ill sell it for 60 bucks

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If it's for a SR20, make sure it's not the American Poncams, might as well call them Poocams. Had a set in a friend's car, all scuffed up after a few track days. Like the metallurgy Tomei USA used is junk. Went back to JDM OG Tomei Poncams, no issues till now.   Tomei USA is not the real OG Tomei.   Random rant over, fk the US of A, bunch of c u n t s. 
    • Most of the industry in North America either runs on Siemens or Allen Bradley. I have two redundant S7-1500's on my desk right next to me for simulation. Siemens has been losing ground though since Stuxnet, as cybersecurity is a big thing. In my line of work that is federally regulated, you must by law have a cybersecurity management program in place and its audited and inspected every so often.  I work with Emerson PLC's daily (RX3i's) and have done large biogas/refinery projects with their DCS's. Their PLC's are somewhat OK minus the way they do PLC redundancy (You have to download on both PLC's separately every time you make a change )  As for their DCS's... you'll be limited financially first before anything else stops you. Costs are exorbiant at roughly 10x what it would cost you to do with any other system (e.g AB PAC).  1990's, those suckers are brand new haha! Kraft-Heinz (An old client when I use to work for an ESP) still runs Siemens TI505 PLC's from the mid 80's. Ohh how I don't miss working with those... you could only do a certain number of online downloads until it's "Change" buffer would be full and you would then need to go offline to do a full download. There was no warning of when this was coming up and it generally would happen when you would go in at 2am to make changes before production -_-.     
    • Unfortunately, not only is that not the case, one of the main "Selling points" of safety over comms is they clearly state in writing that there's no need to segregate safety networks from non-safety networks. It always gets intermingled with everything else on an ICS/OT network. 
    • Hello. I have an a31 cefiro but since I am in Turkey we have a CA20S engine. I did some research. Then I found that I can swap with a ca18 but when I heard that it has the similar substructure as the s13. I thought I can swap with an sr20 because the sr20 was used with the s13. So can I easily swap the sr20 on my cefiro or is it difficult? 
×
×
  • Create New...