Jump to content
SAU Community

Recommended Posts

Hey guys, ive been training for a year and can only manage 5 i would love to do sets of 20

I think Rev said to do partials in the upper range of the movement?

Would this be the best start? Im 107kg

Upper range is definitely the hardest part of the movement when things get tired, so probably good to target that segment of motion.

Lat pulldowns and weighted pullups can help this movement a great deal.

Other than that, just try going to the maximum each time. Even if you feel you can't get a 6th, try for it and you'll eventually get higher each time. Also try resting for 5 mins and going back to them. Muscles get "pumped" quite quickly with pullups and it can cost you reps on follow up sets. Give them some time to settle down and you'll get more reps out.

My son i started training on them. He couldnt do even 1. Does 6 now. Very few sessions lots of time of between attempts.

Do negatives After you fail full. 1 set only . Rest 3 to 7 days . Dont bother with lat pull downs. Dont do both.

When you are failing its best not to push last rep. When u start out its easy to overtrain the movement.

16

12

12

14

17

12

11

12

14

17th rep was a struggle. Last time I could do 17 of these, I weighed about 73kg. The first 7 or 8 feel like a piece of piss these days.

  • 2 weeks later...

ffs I hate pullups, only get sets of 4-5 out pisses me right off

How many do you want to do?

4-5 is still good. Lots of people can't do even 1.

You can get to 20+ if you want to easy enough takes a few weeks. Just have to put in the effort. You can do it.

I still haven't tried any pull ups but am still doing weighted chins.

After a 10kg warmup set of 8 I can come close to doing 2 sets of 8 at 25kg. Usually 8-6 or 8-7 , sometimes 7-6 etc but in and around that range.

Does anyone know what's considered a decent weight on this exercise?

I realize pull ups are harder but I prefer chins as I get some bicep work also which I need as I have girly arms - yes Rev I know you need to pack on x amount of kgs all over to see 1inch improvement in arm size :)

What do mean Press, bench?

I do weighted dips for tri's/lats/shoulder girdle (and bent rows for some of the same areas)

I guess I'm just a weak person then, no surprises.

Pull ups just doesn't really interest me. I'm assuming if I was fresh maybe I could do 5? How wide a grip do you take and on the flat part of the bar or the angled part?

Might try some tomorrow for shits and giggles.

Pressing movements can be bench ohp etc. Skull crushers.

Pullups can be hard. Thats why they are good. Slightly wider than shoulder width is fine to start.

5 is good. Many people cant do even 1. Do them as per the challenge. See if you can improve.

Remember this is a pullup thread. Not a chinup thread

Average would be good enough, in almost all cases I find that my approach to exercise is good enough to get me on par or close to it to the average gym goer.

Which is better than the average IT guy that I work with lol.

Dave, what would you consider neutral grip to be, i.e. palms facing each other on a shoulder width grip? Seems to me like it would be more chinup than pullup.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • After 23 years of owning a Skyline, finally had the latch go.  Followed this guide,  works like a dream again. Great Guide 👍
    • Hi all,   I’ve got the biggest lot of problems with my R33 GTS-T   It was a freshly rebuilt 25th anniversary RB25DET (plastic cas, neo cams) probably 6 years ago now   The engine was running so well but I fkd up badly and trusted someone I’d known for 10 years that was well known around Plazmaman for his welding and fab work. I added a lovely photo of some of his previous work. Not sure why my car was worked on by whoever did this shit     I’m normally someone who would never open myself up to something like this, I still can’t believe I did it. Trusting him literally fkd it all up for me. Everything has been a struggle, like it’s almost been 6 years that’s how much I’ve just on and off been trying to work it all out.    All I wanted was a car that danced down low, like full boost from around 3~3500rpm to redline, don’t really care what power it puts down (if it ever does) but I just wanted it to be quick to get on it.    He recommended the turbo to get, I picked Hypergear but he told me to get the front 4” with a T4 and 0.68 rear housing.    I was expecting all these beautiful welds, tidy fab work and paid for it to be ready to go to a tuner when I got it back.    I got a car back that was an absolute mess, I actually couldn’t believe it was my car anymore. I don’t think you could even call what he did welds, they’re disgusting.    So I stripped everything he touched off it and with every bolt I loosened it just got worse and worse.    I covered it and literally built and finished another car in the meantime but now it’s getting to the point where I really want my Skyline back.   Its a struggle because I paid him to do all this shit because I didn’t know how to and now I’ve had to try and figure it all out omg    Please excuse the bird shit horrible welds, I’ve got my show pony car and am so beyond dealing with this car I don’t even really care at this point.    If someone told me about what he did to my car I wouldn’t have believed them but it happened to me. It was unbelievable. He went missing, my car went missing, it came back missing parts, the straight af chassis rails bore the scars of being dragged up a trailer backwards, even the sandwich plate was bent. Everything was leaking and open to whatever fell into it, rounded off/ missing bolts, power steering oil and coolant everywhere, no gaskets, parts stolen off it, even managed to damage the sump pan.   Promised me he’d finish the car, knew what it meant to me, I paid him thousands and thousands just for him to trash it. He told me he was fully licensed and insured, come to find out he’d cancelled his ABN, so obviously no insurance. I had laid up insurance on the car and would’ve been covered but I was scared they would’ve written it off or because the business was no longer trading I’d still be liable.    He was supposed to:  New fully custom mild steam pipe exhaust manifold with turbo location moved from factory position to high forward mount. (I don’t know if it is a mild steam pipe, I’ve got a funny feeling the waste gate isn’t in a very good position and I don’t think the outlets off each cylinder are equal) 4” custom stainless steel dump with external gate (he re-plumbed it) Cut and shut OEM intake manifold with throttle reposition (I ended up doing the throttle reposition) Box in pod filter (left out) New 100cel catalytic converter (pretty sure it’s there but unsure if it’s 100cel) Front mount intercooler piping fabricated to suit (all smashed up and rusty holes where he was supposed to make it look standard where fmic piping passes through. I don’t even think my front bar is going to fit 🙄) Custom 5” intake pipe from pod to turbo (didn’t come with it so had to do something to make it work with the Z32 afm)   Engine: Full cylinder head service & machining  Brand new valves Precision upgraded spring kit Engine block honed New bearings  New piston rings  New ARP conrod bolt kit New ARP head studs Cometic head gasket VRS kit   ATR43SS2 ball bearing turbo 0.68 rear housing  Turbosmart 45mm external wastegate (got delivered to the fab bloke, I’ve got no idea what spring is in it, I’m assuming the one that came pre installed) Walbro 260 fuel pump  Nismo 740cc injectors (tested to 880) Spitfire coil packs GCG FMIC RB25DET manual 5 speed 4:11 rear diff   I’ve got an Apexi Power FC in it atm, I was hoping to just get it to operating temp to make sure everything was okay before towing to a tuner but it’s over-fuelling too much. I don’t think that’s going to happen so i think I’m going to get either a Link G4 or Haltech for it. What do you guys recommend? I can’t work out the power FC so just gonna give up on that one     It’s got an exhaust leak coming from somewhere I can’t see 🙄    The fuel pressure was steady but now it like drops from 40 to 20psi randomly (noticed this yesterday)    I’ll attach pics of the shit he put on my car and the engine bay now as it sits    I really just need some help, I need a tuner in Sydney I can trust, I’d like to be with the car while it’s being tuned if possible, I know it looks terrible but unfortunately I’ve just got to put up with it for now and fix the cosmetic stuff later   Do you guys think the manifolds are going to be okay? Or do I throw the exhaust manifold and try again?   I don’t even think these combinations are going to work tbh   I know everything I fitted was rated to be able to take at least 400kW but most rated higher    If you’ve gotten this far I really really appreciate it 🙏 I don’t mind if you trash me or the car, I made a rookie error and f**k I’ve paid for it. As you’ll see 🙄  
    • From everything I’ve heard you’ll be waiting a long time for  the parts to arrive 
    • Have you looked at the workshop manual?
    • Hmm. I've gotten pretty good outcomes from talking to them about things that I've had go wrong or ideas for improvement. Have had a lot to say about the R32 FUCAs, and they have sent out some replacement parts for those, gratis, on a couple of occasions. Mind you, I have bought a couple hundreds of $ of replacement rod ends for them too!
×
×
  • Create New...