Jump to content
SAU Community

Recaro Buckets Suit 32/33 Gtr/gtst $550

Calsonic14U
 Share

Recommended Posts

Calsonic14U Mentor

Calsonic14U

Posted
Posted

Hi guys I have for sale these RECARO bucket seats out of my skyline.

They are near new condition. Small mark on drivers seat (see photo) other then that pretty much new.

Only other drama is drivers recliner broke. I have made a bracket to hold seat in a nice seating possition.

I drove my daily with no dramas but for proper fix will need new recliner assembly. Comes with home made

Brackets to suit 32/33 skyline. May also fit S13 i think.

Asking $550 ono, or will swap for 32 gtr seats. Condition doesnt have to be perfect as its for my track car.

Please PM or phone 0439588620, please no private numbers.

I check forums daily but that would be easier.

Pick up Blacktown area, seats are at my workshop.

IMG_1335_zpsf97d586f.jpg

IMG_1334_zps87c3ef37.jpg

IMG_1336_zps396f32be.jpg

Cheers Luke.

Link to comment
Share on other sites
Calsonic14U Mentor

Calsonic14U

Posted
  • Author
Posted

Luke im going back to a standard GTR seat due to having got the weld in cage and the seats sit a little higher overall then a stock seat. Once i put a helmet on i hit the roof :P So GTR seat is a tad lower. It was ok in my daily still had headroom.

And I believe these are genuine recaros never been re trimmed or anything. but i cant say as i brought them second hand to start with off a mate.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      Lets play a game - What is causing my oil consumption?

      By Dose Pipe Sutututu · Posted

      I am going to chime in here and say that is very bad advice for a built motor, making decent power of 400kW+ Especially if the rings have been gapped on the looser side. The more power you make the heavier you need your oil to be to be able to maintain that suspension between the moving parts, if not you'll have journals and bearings making love and grenade a motor. Remember that all moving parts inside the motor aren't ball bearing and are journal bearings and require oil to separate the surfaces from contacting.
    • 25RBGT
      Got this r31 silhouette flood car to rebuild.

      By 25RBGT · Posted

      Yeah I noticed this just now. No doubt she will be running smoother next start😂🤣😂
    • joshuaho96
      ENR34 - Leaking Transfer Case

      By joshuaho96 · Posted

      ENR34 manual transmission transfer cases are 33100-23U00 which is shared with all of the R32/R33 GT-Rs and GTS-4s. And the C34 Stagea. Do not bother with automatics, that is a huge effort to swap and the car will be worse for it. And an automatic transfer case does not have the right housing for the shifter which comes out the back of the transmission and goes through the transfer case. I already posted my response on reddit but if you didn't see it there here it is: You have almost certainly damaged the transfer case, the only question is how badly. Nobody can tell you how bad without more information. If you have a giant hole in the transfer case pissing out all the transfer case fluid then you need a new one. If it's not that bad then the only question is whether you burned up the clutches. Drain the transfer case oil and inspect for metal on the drain plug magnet. Small black filings are normal. Big chunks of metal or a ton of black fuzzies not so much. Fluid should be nice and red. Any other color isn't great. If the color is reasonably red and there's not a bunch of clutch material discoloring it or anything like that you probably got away with insubstantial excess wear not worth trying to fix. If you have to rebuild or replace the transfer case keep in mind you have to pull the transmission to get it off.
    • 25RBGT
      Got this r31 silhouette flood car to rebuild.

      By 25RBGT · Posted

      As promised………… the first start. Rough and a few bugs to work out. Still she lives att.1cnTUvrWxiOZUFbg0S43m1VFUdDhxGBq3UU53bvtkww.mp4
    • blind_elk
      Lets play a game - What is causing my oil consumption?

      By blind_elk · Posted

      Can I suggest a 15W50 oil is too heavy. Its a brand new engine - you should be able to run something like a 10W30. Shove some steel wool into your catch can  - more technically "oil/air separator" - so that the oil vapour has something to condense on.
×
×
  • Create New...