Jump to content
SAU Community

Recommended Posts

Damn that's a good time I'd be very happy with that.

I wish I could get my run in except they've cancelled for the last two weeks due to weather :(

Soon the AR-X's will own best times in 3 states.

1 may even have the Australian title! :P

I can't wait to get the rs260 down the drags, sort the clutch out then before the mods will do a run to see what mph I'm getting at the end or the 1/4 for bench mark!

Hoping ill get it lower 60 foot than my VL! Don't think ill get it lower than what the VL has run! If I can get it as low as what rbnt got his rs260 up here 11.8 ill be very happy :) ps I wish the track was only 28 degrees most of the time it's in the 30's plus

Any ideas on what a completely stock 250t rx 4 would run?

Im heading to the Eastern creek drags on the 22nd if anyone else is keen.

Possibly keen. Just gotta see if my car is happy before then.

Would like to see where I'm at currently.

Had my first run ever at the drags last night.. Only got 4 runs in. The best I could muster was 13.4 pretty happy with that..

The car kept getting really cold as we were having over hour waits between runs..

Hopefully keep improving the car and the tune...

Had my first run ever at the drags last night.. Only got 4 runs in. The best I could muster was 13.4 pretty happy with that..

The car kept getting really cold as we were having over hour waits between runs..

Hopefully keep improving the car and the tune...

well done great time:)

It's a lot easier to keep a car warm than to cool it down, mine was heat soaked and I could do nothing about it. Other guys were putting bags of ice on their coolers and engines to help combat the heat.

I should probably get up to Heathcote soon now it's winter and get a time on the current tune, I am only going down in power from here. (perhaps back to a highflow soon) I have had my fun...

I had two similar runs at 13.4 at 102-103 mph.

I'm amazed at how much the brake cut makes a difference I forgot to turn it on for the first two runs :( and got 14.5-14.2.

Yea totally agree Scotty but if the transmissions cold would that effect times etc as its not possible to warm it up without moving anywhere?

I'm sure there are many factors that could lower my time ;)

I had two similar runs at 13.4 at 102-103 mph.

I'm amazed at how much the brake cut makes a difference I forgot to turn it on for the first two runs :( and got 14.5-14.2.

Yea totally agree Scotty but if the transmissions cold would that effect times etc as its not possible to warm it up without moving anywhere?

I'm sure there are many factors that could lower my time ;)

I had two similar runs at 13.4 at 102-103 mph.

I'm amazed at how much the brake cut makes a difference I forgot to turn it on for the first two runs :( and got 14.5-14.2.

Yea totally agree Scotty but if the transmissions cold would that effect times etc as its not possible to warm it up without moving anywhere?

I'm sure there are many factors that could lower my time ;)

I had two similar runs at 13.4 at 102-103 mph.

I'm amazed at how much the brake cut makes a difference I forgot to turn it on for the first two runs :( and got 14.5-14.2.

Yea totally agree Scotty but if the transmissions cold would that effect times etc as its not possible to warm it up without moving anywhere?

I'm sure there are many factors that could lower my time ;)

I had two similar runs at 13.4 at 102-103 mph.

I'm amazed at how much the brake cut makes a difference I forgot to turn it on for the first two runs :( and got 14.5-14.2.

Yea totally agree Scotty but if the transmissions cold would that effect times etc as its not possible to warm it up without moving anywhere?

I'm sure there are many factors that could lower my time ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • That's the thing. Cam is smaller than before.. though the old cam was +6 degrees advanced. We're talking huge changes here, the narrowbands want to trim out 20% of fuel and pull the (wideband) idle to like 16.0 AFR or such. One side is a little more trimmy than the other. Think along the lines of ~20% to ~15-18%. Unfortunately my scouring of the internet hasn't really found anyone with this issue. People either just disable NB's or have them wildly different, where one is -20% and the other is +20 or 0 (i.e a sensor is just dead/wiring is just busted). Turning them off and relying on the base map only results in the wideband reporting at about 14.0 with the Varex closed. It'd be a little leaner (closer to 14.7ish) with the Varex open. I know I can just change the switch points so that the narrowbands agree with the wideband, but it's still odd. Both of them are reading voltage, it's just that they're reading quite high mv, in the ~800 region. It's just odd. This was with the IAT fudged to report it was about ~22 degrees which is my guesstimation of the temperature in the room. I have an OEM sensor ready to try tonight, which is slow and crap - but .. worked last time I used it. Sadly I am aware that idle tuning with the big TB is going to be a PITA and I look 'forward' to many hours spent stalling or stumbling idle or delving into drivability things.
    • The GTR strut brace clears the new manifold.. by about 0.5mm. So this means I need to buy an OEM GTT Strut brace (again), which will clear the new manifold, but not the bonnet vents. I guess I can sell the GTR Strut brace with the bonnet with the vents as a package deal as someone will need this one day. So my choices are vented bonnet but no strut brace, or GTR Bonnet with OEM brace (which I have to buy) but is bright red instead of the same colour as the rest of the car, which means the entire front end of the car will just be red until it goes back to paint jail. In other news the engine starts and doesn't leak. Why both O2 narrowband sensors think the tune is rich AF I do not know. The idle is also pretty shitty and my expensive IAT sensor from the USA is dead. The car sounds awful. But I assume or at least hope this is due to the many exhaust leaks, and the concrete garage it is in, sitting there with 0 intake bolted to it, and no bonnet or panels or anything to stop the induction/intake sound which is about 200db.
    • C'mon! At least come kicking and screaming into the 2000s. BA XR8 bulge.
    • No such thing as E30 in Sydney servos As stated above, flex fuel is your only viable,  and "safe" option I believe
×
×
  • Create New...