Jump to content
SAU Community

Recommended Posts

not sure 4bidn1.

the car is purely road tuned so unsure as its been retuned since my last dyno run.

Im hoping to get around mid to low 300 hp on the dyno i go to ( it reads HP) as my previous 1/4 mile run was 13.45@275hp

one for the RB heads. this 33 gtr he claimed had 450hp i saw a massive highmount single. i was just in front for about half track before he left me for dead.

he ran a 12.2

I'll tell you which car I would pick for the roads I drive on (Hint, it doesn't have the highmount single....)

Nice runs mate.

  • 7 months later...

Nice one Chris, good launch. 1.8 60 foot is pretty good considering these cars weight.

I've lined up against a STI too, took off like a jackrabbit, but by 1/2 track I over ran him. They seem to run out of puff.

Goal is not far away. If you had Craig's 3.5:1 diffs.....

  • Like 2

Nice one Chris, good launch. 1.8 60 foot is pretty good considering these cars weight.

I've lined up against a STI too, took off like a jackrabbit, but by 1/2 track I over ran him. They seem to run out of puff.

Goal is not far away. If you had Craig's 3.5:1 diffs.....

yea i think that would help alot Alex it would just help that littlebit more out of the hole. We still have a few things to work on and im sure i can get 12's.

yea i saw him just creep in front on launch and my tyres where squealing then after that i had him. He wasnt too happy being beaten by a wagon..

Very nice!! Gotta love silly commo drivers :P

Wat sort of work have you done on the car?

haha thanks mate earlier in the night i went up against a VN commodore that was fun...

its got the ss2highflow with all the supporting mods, and tuned on HKS F-con.

if i was really serious id take out all the upgraded suspension and whiteline swaybars and bracing but that will be next when i get the parachute and NOS installed hahaha :whistling:

Edited by Footo
  • Like 2
  • 3 months later...

Been chatting to dale and thought I'd share my times from last night for my m35. ran consistent 13.6 - 13.7 through the night with this being the fastest time.

Stock intake, stock turbo, stock motor just a couple light mods and looking forward to putting on my Highflow made by Per4manz turbos in Perth


videos from last night



post-103368-0-60730800-1410438318_thumb.jpg

Edited by red_spider
  • Like 1

Nice work Jono; I'd guess this is the fastest time for an NM35 running stock turbo, and stock intake for sure.

pretty happy considering the amount of tools,clutter and crap in the back,had the spare in and even the fabric cover...plus the driver is heavy set...

no weight saving features here :P

  • Like 2

pretty happy considering the amount of tools,clutter and crap in the back,had the spare in and even the fabric cover...plus the driver is heavy set...

no weight saving features here :P

Beard adds 37awkw's.

True story. ;)

  • Like 1

Been chatting to dale and thought I'd share my times from last night for my m35. ran consistent 13.6 - 13.7 through the night with this being the fastest time.

Stock intake, stock turbo, stock motor just a couple light mods and looking forward to putting on my Highflow made by Per4manz turbos in Perth

videos from last night

same stats as mine but i ran a 14.1, hmm unusual ????

same stats as mine but i ran a 14.1, hmm unusual ????

What psi have you been launching at rudi? Also how hard was he launching? There is always variations between cars of the same type, but it is a fair bit different

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • HKS trigger kit should be very easy to integrate with a Link. It's a 36-2 crank trigger. Hard part is finding the motivation to take off the timing belt and everything on the front of the engine to install it. You also need to cut out a hole in the oil pump housing so the sensor can read the trigger wheel. Changing out the cam sensor for a 24 tooth setup is probably good enough but as others have mentioned depending on what underlying assumptions are changed it becomes more of a problem. Reading the crank state off of the cam is an abstraction that works in the general case, but if you have an edge case it makes less and less sense. There is a GTX2860 gen 2 that can take a compact 5 bolt housing so it's direct bolt on but I'm not 100% sure of what's involved. Peak compressor efficiency drops off a bit on these turbos vs -5s, 77% vs 73% but you get way, way wider region of operation. The -5s have a really strange surge line in their compressor map that is all over the place. If you think the hot side on the -5s aren't open enough you can try the Tomei T550B turbos which a local tuner seems to be happy with:
    • i need a complete tail light for my R33 GTR if you have please let me know.
    • I need a great maintenance workshop around Idaho, if you know one please let me know..
    • Hello friends, i have a good friend in Canada that looking for a good condition 1993 GTR around him please if one or know someone around you that is willing to let it go please let me know so that i can inform him.....Thanks
    • I'm mark from Idaho.
×
×
  • Create New...