Jump to content
SAU Community

Recommended Posts

Hey Homies!!

Sorry ive been so lazy over the last year and a bit,

alot of stuff came up and the project got pushed back as usual,

on the + side i done a nice big tour of Europe, got engaged & done another drifitng to Japan.

The car has come along way since last photos last yr and is only approx 10 weeks from being completed.

Over the next couple days ill slowly upload all the New photos.

Thanks Guys!! :cheers:

post-60275-0-10015000-1409135719_thumb.jpg

1st time everything was bolted all together

post-60275-0-40824300-1409135737_thumb.jpg

I dont know if you've mounted an aftermarket seat in you 33 before but if you have you'll realize what an obscure angle the front of the seat kicks up and how high you are actually sitting, this is why i took the grinder to the factory floor mounts and fab'd up my own so my legs sit in a very comfortable postion

post-60275-0-48503300-1409136133_thumb.jpg

Subframe all braced and gusseted, solid bushes throughout and a fresh coat of paint. Has a kaaz 2 way i put in there only about 6 months before i took it off the road

post-60275-0-73858800-1409136432_thumb.jpg

This was the lock with the gk tech knuckles, currently no lock stops welded in. Was having lots of troubles going over centre on full lock, since then i have decided to change to PBM front knuckles due to a personal choice and the powersteering rack has been moved forward.

post-60275-0-28771500-1409136598_thumb.jpg

post-60275-0-59416200-1409136573_thumb.jpg

all tacked in

Looking good!

Will the outside be the same colour as the inside?

Nah i have a differnt color for the outside, i sprayed the fender my new color for a sample which ill put up :P

post-60275-0-38100000-1409642166_thumb.jpg

Engine bay is coming along nicely, this is how it currently sits as im still waiting for my motor to be finished from sydney.

post-60275-0-53679600-1409642238_thumb.jpg

New switches for the Dash.

post-60275-0-37720600-1409642520_thumb.jpgpost-60275-0-53772600-1409642528_thumb.jpg

Motor almost complete, Just waiting for oil pump to rock up from the states and where good to go.

Hopefully my new engine loom from chasebays rocks up this week so i can start chipping away at the rest of the wiring this weekend and switches

  • 1 month later...

Out the shed to send off for the rest of the fab work. Ic piping, exhaust, tailshaft, oil/fuel lines in bay, brakes lines.post-60275-0-78514300-1413841266_thumb.jpegpost-60275-0-86246700-1413841284_thumb.jpegpost-60275-0-75106500-1413841354_thumb.jpeg

Crazy front wheel track.

post-60275-0-98262500-1413841301_thumb.jpeg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
    • Sounds good, we will aim to be there! @The Bogan I'll give you a shout if you are heading up to campbelltown for the meet too.
    • Before I get to the test day, just to finish off the android head unit. This is a demo from car start up....the standard/host system takes a few seconds to boot (same as all v37) but Android comes up quickly. In this vid I'm using the delivered launcher but have set the default to Agami since which is easier to navigate when if use primarily 5 apps. You can see the host system still takes over when required eg putting it in reverse, and you can switch between Android and not by holding the back button 3 sec. It is pretty responsive (fast) but you can see I had to press harder than expected a couple of times.  I still have the phone connected to the stock system, and that also seamlessly takes over Android music playing. v37-android-demo.mp4 The bigger reason that I put this in though is so that I can use Ecutek directly on the head unit. That gives me a dash with logging (up to 20MB only), high and low value warnings on any parameter etc etc. I've run a USB cable from the Ecutek OBD dongle to a USB input on the unit, easy. v37-ecutek-demo.mp4   The unit did freeze on the launcher the other day, I think Agami was trying to verify the license when it didn't have a data connection...will monitor and report back if there are any other problems but so far I'm very happy with the upgrade.
    • Nah that is just crappy GPS mapping, I did have a small excursion (cold tyres, damp track, surprise!), will post up that when I get a chance.
×
×
  • Create New...