Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...

I sold my V36 today. Was driven away by the new owner this evening. Very sad day.

I have been looking at a Skyline Crossover and have visited 2 different compliance workshops in Melbourne this week.

I will get to the point...

One workshop claimed he could now convert the navigation and menus to English on the V36. Cost about $1,200

Guess I'd have to see it to believe it. I get the impression he was keeping it a secret and it's only meant for cars that he complies and sells through his workshop. I don't know if he is going to roll it out to everyone as a service and I didn't bother to dig any deeper. If someone wants to contact them further to find out if this is for real then PM me and I will pass on his details. I'm not posting the name of the workshop as otherwise he would get flooded with calls.

The other workshop had the conversion and was working on some code or copying a chip. Don't think he quite had it 100% cracked but he was quite sure it was just about ready.

Edited by ChrisB
  • 2 weeks later...

Yep. Nothing special there. Been able to do that since they have been coming here. Everyone bitched about the price. No different to doing a V35. Rest of the system is still in Japanese.

So just a nav system connected into the AUX inputs using a seperate dedicated remote?

No touchscreen interface, just a display screen.

Ahh that would still be crap then.

What's the point of having it on screen if you can't input destinations using the interface buttons and instead have to enter it in at the GPS device itself.

Better than nothing and neater than suction cup marks on your windscreen, constantly packing away and taking back out another GPS unit, etc.

Now that I have screen mirroring available on my Samsung, I'm getting a mirrorlink device to plug into my video input and run it through my phone's GPS. The final step will then be to see if the elusive Mimic X2 can be obtained and see if it will work well or not.

I'll be damned if I were to be expected to mark my windscreen or my dash trying to mount an aftermarket GPS display.

So just a nav system connected into the AUX inputs using a seperate dedicated remote?

No touchscreen interface, just a display screen.

Screen hijack. I can already do the full control off the screen with one but everyone will bitch about the 4 figure sum of money to do it.

Been able to do the non navi for years now and to be honest it's the same kit I use for the local patrol,pathfinder,maxima , murano and a couple of others in the line.

Max,

That piece is frustrating. Video resolution is crap as well UNLESS you get the scaling right. It needs to come up quite a bit. Already been there.

There are two manufacturers in China producing these things. I'm trying them both out so we'll see how we go when they arrive. I'm doing it primarily in the hope that Sony will eventually introduce at least Android OS 4.2 in my NW-ZX1 audio player so I can then have full control of my audio from the vehicle's touchscreen.

  • 3 months later...

I'm surprised there isn't a flashable Windows CE 6 or Linux distribution engineered for the unit. at the end of the day it is just Linux installed on it. Chris have you been able to bring up the Unix shell somehow?

This unit is based on VxWorks and not Linux.

It is not easy to build your own OS to support all car electronics, as it is not just a multimedia center. The car won't start without this box running properly.

The required work has been done by smart guys already, see this video for example

  • 4 months later...

Have there been any updates on this? I just moved to New Zealand from the States, and bought an 07 350gt Jap Import. My friend has a JY in California with 5 G37's with Navi/There is also a NZ NEW 250GT with Navi/ If i took the complete setup/ loom from the NZ NEW one, whats to stop it working, i'm talking HDD everything

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hey, yeah I really like the color. Only paint I'd rather have is KN6, but those are expensive. Right now I'm trying to get the car to the point where I can get it tuned to 370hp so the whole setup can be driven legally, and pass the next inspection that is already due anyway. Beyond that lots of rust fixing I'm afraid, winter project is most likely going to be a front end teardown and fixing the strut tower rust. I know these can be driven daily but I don't think I will do so anytime soon. Will post a build thread soon with a list of issues and futute plans.   Cheers
    • Wanted to reply to this topic. I'm in the somewhat same boat with our Stagea. I'm trying to install a different rear diff. The Stagea/Skyline uses mounts on top of the rear diff for the ATTESA pump. Any way you can relocate the pump? I did find this kit https://theskylineshed.com/products/nissan-oem-attesa-mounting-kit-to-suit-r32-r33-r34
    • So here's the deal, my wife picked up an S2 AWD Stagea. Super cool, clean car. Looks like the owner in Japan went track spec as it's got some heavy modifications including Exedy twin disk, tension rods, coilovers, GTR brakes, oil cooler & a Nismo 2 way rear diff. Now, cool mods for sure. But, she is just using this as a casual daily driver. The 2 way rear is AGGRESSIVE. It also has solid subframe bushings & poly diff bushings. So that doesn't help either. So far I've tried changing the diff fluid to the correct fluid. Even tried a little friction modifier. No help. This thing clunks, skips the tires & has some slight whine/NVH when driving. Might sound like I'm being picky, but just trying to find a better solution. Here in the states, it's impossible to find a Stagea rear diff. No luck. I do have a 300zx non-turbo diff. Same ratio, 5 bolt axles. On the Stagea, you need both front & rear diff ratios to match. This car is a 4.083. I'd like to just swap a normal rear diff into this thing. Nothing fancy. Even open diff is fine. She's not tracking the car LOL The difference is that the ATTESA pump mounts to the top of the rear diff. There are 3 total mounting points for the pump on top of the diff. With all this being said, what would be the best way to go about this? I could remove the Stagea diff & see if I could get somebody to possibly weld the 3 tabs/mounting points onto the 300zx diff so we could mount the pump on the 300zx diff. I could swap the internals from the 300zx into the Stagea diff but this is not in my comfort zone. Is it possible to mount the ATTESA pump to the underside of the car? Sorry for the paragraph. Just trying to figure out how to go about this. Any help is much appreciated! Stagea Differential - Note two top tabs, one bolt hole for ATTESA pump mounting   300zx Diff - No mounting tabs Also found this mounting kit ?? https://theskylineshed.com/products/nissan-oem-attesa-mounting-kit-to-suit-r32-r33-r34  
    • Not ready yet, but maybe later in the year?
×
×
  • Create New...