Jump to content
SAU Community

Recommended Posts

I have an r33 skyline 1994, it has a bad case of backfire, it has very poor acceleration and when i accelerate it gets stuck at 3 rpm backfiring really bad, i have check spark plugs, fuel filter, coils, afm, vacuum leaks, i have cleaned throttle body, afm, aac valve ive had a mechanic check it he cldnt find problem, its undrivable and check engine lights on, timing strts up at 20 on strt up and slowly decreases to 15 as car warms up. Mods are

Splitfire coils.

550cc fuel pump.

3 inch turbo bAck exhaust

High flow turbo

Apexi pod filter

Apexi fc commander

Boost Gauge

Front intercooler

Boost controller

Lowered 1.5 inchs

Short shift gear box

What di you guys think

Link to comment
https://www.sau.com.au/forums/topic/421517-r33-problem/
Share on other sites

Even though you have splitfires in there it sounds like textbook coilpacks.

Try some other known working coilpacks in it.

Otherwise you say you have only 'checked' sparkplugs and 'cleaned' the AFM.

Id go for changing spark plugs to the tried and tested bcpr7es .8 gap. Also 'check' that you dont have a dry solder on your afm or some other problem/damage in it.

That timing seems normal but otherwise when was the last time it was tuned/ PFC checked?

good luck. Nothing worse than a case of the missfires/backfires.

Edited by jjman
Link to comment
https://www.sau.com.au/forums/topic/421517-r33-problem/#findComment-6780712
Share on other sites

I changed sparkplugs to those ones clned maf the joints look fine but it could be i unplug maf while car was running it stalled strted it up with maf unplugged idled shit we tested coils by unpluging one at a time while car was running

Link to comment
https://www.sau.com.au/forums/topic/421517-r33-problem/#findComment-6780751
Share on other sites

mate it seems at peak boost is when your problem is, has to be either afm or coils/plugs. very sure of it. i put to much oil on my air filter once and when it hit boost at around 2600rpm it hit a wall, point being afm wasnt reading correctly. and coil packs bring on the engine light. on standard computers anyway not to sure about pfc in how it stores trouble codes if it has any

Link to comment
https://www.sau.com.au/forums/topic/421517-r33-problem/#findComment-6781099
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The previous switchover point was 501mv. The stock value is like ~360. They now were idling at about ~880. The thing is, most people get a false lean condition. I am getting false rich conditions. This isn't a quirk of terminology, most cam upgraders get awful fuel economy because the O2's read false lean and add fuel - Mine are attempting to aggressively subtract fuel.
    • So... the whole idea was to upgrade the power of the motor from stock. The motor I bought with the gearbox had 'some' stuff done to it in the past, but it wasn't as well thought out/what I had wanted to do. The stock heads typically are a big restriction on LS's and need porting to unlock quite a lot of power. You can then go a bit silly with aftermarket castings to get more, aftermarket intake manifolds for a little more, and then porting those for more. <- We are here. Nobody in Australia really goes down this path (for some reason). It might* make 3kw or something more than doing things the tried and true path for 10X the cost. So that's probably why - I wouldn't even recommend it to people, the money was and is likely better spent on just CNC'ing the stock heads and putting a 6.3L stroker kit in. I didn't want to go down the 'normal' path and then think: But if I'd just done a bit more - I could have had a slightly better result. I assumed the heads were running out of flow and it always annoyed me - Turns out the previous installer advanced the cam 6 degrees so this is likely why it was coming on earlier and running out of puff earlier than advertised. The body panels were just lack of planning/no information on this anywhere on the internet and the fact they came out different was annoying. From test fitting the guard it appears I could have gotten away with GTR guards only, but I got the bonnet and raisers and everything else as well for a pretty decent package deal.
    • So you had a car that by all accounts drove well and survived track days, and that was looking great after months of being stuck at a paint shop. Some might call that a finished project. But you decided this is not quite right. So now the car does not run anymore. And the engine doesn't fit anymore. And the body parts don't match anymore. But, this is progress somehow. Greg, I think your subconscious does not like you and does not want you to drive this car. (I know I know, this whole escalation was not intended, but man, what a rollercoaster)
    • Yeah, but the narrowband is truly narrowband. So you take it out of the linear zone and it is effectively nonsense. And that linear zone is so literally narrow, that nonsense is not very far away. Unless they are flicking back and forth across the stoich point, for real, under actual control, they can't be trusted for anything except entertainment value.
×
×
  • Create New...