Aftermarket Parts Sale - Gtrs, Apex, Alloy Rad, Rays

[Nismo32]

Hello All,

Have a pile of parts that i need to move.

Parts are not all in the same state. I moved to Brisbane a while back and have some of it here and some is still back in Melbourne.

Turbo's:

1. Near new HKS GTRS for RB20/25:

I bought this new from Kudos and used it for a bout 1500 km's (Was on the car when it was in Melbourne and i was in Brisbane, so didnt get driven much) Car made 250rwkw with full boost at about 3K. Super responsive turbo!!! I upgraded to a larger turbo as im a track bitch and this turbo isnt big enough for that!

Price - $1400 (I dont have lines for it sadly-i do have many bits left from the kit that can be used) - Located in Melbourne

2. Blown HKS 2535

On the car when i bought it - lasted about a year or so and then gave up at Calder.

Price - $300 (NEEDS REBUILD - Has oil feed line and oil drain fitting) - Located in Brisbane

Other Parts

3. Apex cast intake for RB20/25 - Used it with above turbos

Price - $200 - Located in Brisbane

4. UAS 324mm Adaptors for R33 (Not sure if they will fit 32 or oters)

Price - $150 - Located in Western suburbs Melbourne

5. 5 Zigen 3 inch cat back - Made 250rwkw with the GTRS and this exhaust. Pretty quite when cruising but good sound when on the gass

Price - $250 - Located in Western suburbs Melbourne

6. 50mm alloy drop in rad for R33, chinese job i assume (Again may fit 32 but im not sure)

Price - $75 - Located in Western suburbs Melbourne

7. Unknown rad for R33. I dont think its standard but might be

Price - $50 - Located in Western suburbs Melbourne

8. Rays Gram Lights 57S. 17x8.5 and 17x9.5 with 235/45 595 RSR's up front and 255/40 595 RSR's at the back. Rears about 35% and fronts about 50%

Price - $1000 - Located in Frankston

9. New apex pen turbo timer

Price - $50 - Located in Western suburbs Melbourne

10. Drift Blade recliner - Was in passenger side of my car. Has adjustable R33 rail - I do remember an issue with tis rail - The seat belt mount hits the seat when adjusting so will need some work. Also have a range of fixed rails if wanted.

Price - $150 - Located in Western suburbs Melbourne

See pics. Will get pics of GTRS ASAP but it is like new!

Prices are ono.

Contact via PM or email [email protected]

Cheers

[Nismo32]

Bit more info on the wheels:

17 x 8.5 +30 - 235/45 Federal RSR's

17 x 9.5 +38 - 255/40 Federal RSR's

Hardly any rash at all. Sorry i dont have close up pics. No dents or anyting like that. Perfectly balanced.

Photos are from R33 GTST. Fronts sit in a bit cause im running 4 deg neg camber.
Rears are about 1.5 deg neg camber.
I ran these with no guard rolling/flaring and they where fine. Did hit the plastic inner guard on full lock at the ride height i was at. Probably due to camber.
Plenty of clearance for brakes - Pics are 330mm 8 pot Ksport - plenty of room remaining.

Cheers.

[Nismo32]

Pics of the GTRS - Come with the HKS actuator, Stainless dump pipe. Can supply a 90 deg elbow if required also.

Its all wrapped up in a plastic bag to keep it nice and clean :-)

ALso it was purchased new in late 2011 early 2012 i think. I have th receipt for it from Kudos.

As you can see its like new!

[Nismo32]

Price drop on some stuff.

2. Blown HKS 2535

On the car when i bought it - lasted about a year or so and then gave up at Calder.

Price - $150 (NEEDS REBUILD - Has oil feed line and oil drain fitting) - Located in Brisbane

5. 5 Zigen 3 inch cat back - Made 250rwkw with the GTRS and this exhaust. Pretty quite when cruising but good sound when on the gass

Price - $200 - Located in Western suburbs Melbourne

8. Rays Gram Lights 57S. 17x8.5 and 17x9.5 with 235/45 595 RSR's up front and 255/40 595 RSR's at the back. Rears about 35% and fronts about 50%

Price - $900 - Located in Frankston

10. Drift Blade recliner - Was in passenger side of my car. Has adjustable R33 rail - I do remember an issue with tis rail - The seat belt mount hits the seat when adjusting so will need some work. Also have a range of fixed rails if wanted.

Price - $120 - Located in Western suburbs Melbourne

Make an offer if your keen, need to get rid of this stuff.

Cheers.

[Nismo32]

Any interest in the wheels and seat?? Want to move the big stuff!!

Cheers

[Nismo32]

Negotiable on price.

The 2535 with a rebuild should make 230rwkw plus.

Made 230rwkw on my 25 with about 17-18psi (Have the graphs somewhere). Response was amazing.

I imagine it would be good for an RB20 also.

Cheers