Jump to content
SAU Community

Recommended Posts

the Car does NOT come from Japan with baby seat mounts. They need to be added here locally as part of the compiance process.

There are hooks in the floor of the boot but these are for tie downs for the luggage are and are not suitable for baby mounts.

There are 2 methods of putting in the baby seat mounts. They are always put in the roof above the boot and can be in either;

1) Just in front of the plastic trim at the top of the boot opening, (best method)

2) mounted through the plastic trim at the top of the boot opening, (this is where they drill through the outside of the car)

The 1st method is far superior but requires them to separate the roof lining slightly to put the mounting points in.

Ok cool, thanks.

  • Replies 114
  • Created
  • Last Reply

Top Posters In This Topic

I'm quite sure that Ben didn't have to drill any holes in my car, the only hole he drilled was through the plastic for the anchor to sit on the plastic trim.

20130315_125508_zps54b4e0de.jpg

2013-03-15125455_zps35de9b5e.jpg

:wub: Love the way Northshore do the anchor points.

:/ Mine came through a brilliant broker but a compliance shop that showed no love >_<

Strange the cars don't already come with anchor points??

They do have anchor points that are argueably better than the Australian standard. They are the ISO anchors at the back of the lower part of the seat behind the plastic covers. These anchor points connect directly to baby seats and hold the baby seat securely. (no stupid straps around the car)

But as normal, Australian Beaurcrats know more about safety than the rest of the world and we have our own SPECIAL standard.

Just make sure you have windscreen replacement in it. Its a b@tch if you dont and crack a windscreen

They sure do. I have it on my car with them. This is the best money you will ever spend if you get a smashed window on one of these cars

They do have anchor points that are argueably better than the Australian standard. They are the ISO anchors at the back of the lower part of the seat behind the plastic covers. These anchor points connect directly to baby seats and hold the baby seat securely. (no stupid straps around the car)

But as normal, Australian Beaurcrats know more about safety than the rest of the world and we have our own SPECIAL standard.

QFT

Even the Volvo specific system which is touted as the safest in the world IIRC doesnt meet our backwards stds.

They do have anchor points that are argueably better than the Australian standard. They are the ISO anchors at the back of the lower part of the seat behind the plastic covers. These anchor points connect directly to baby seats and hold the baby seat securely. (no stupid straps around the car)

But as normal, Australian Beaurcrats know more about safety than the rest of the world and we have our own SPECIAL standard.

Too right Andy, the ISOFIX system is head & shoulders above ours!

Of course, then the gold digging Australian child restraint manufacturers would have to compete with overseas manufacturers on a level playing field instead of having a captive market to milk.

Heh, my car is insured with NRMA for around what they quoted you, but in my mums name. I did the maths and found even if it was in my name with excesses and premium it would work out to be cheaper under my mums name even if I'm not listed as a driver even if I have an accident.

I recently got off my P's without any fines, demerits or infringements and still got quoted quite high, something like $2200. They also add excesses on top of that if I make a claim, go figure...

Edited by M35woah

Heh, my car is insured with NRMA for around what they quoted you, but in my mums name. I did the maths and found even if it was in my name with excesses and premium it would work out to be cheaper under my mums name even if I'm not listed as a driver even if I have an accident.

I recently got off my P's without any fines, demerits or infringements and still got quoted quite high, something like $2200. They also add excesses on top of that, go figure...

I'd be very careful with that.

If you are involved in an accident, and they deem you a regular driver but are not listed; they will void the policy.

The reason they quote high is because statistically, as a young driver; you are a high risk. Irrespective of your personal record.

It's part of life; I just refuse to use the companies now that ripped me off as a young driver.

They clamour for your business once you own a house, contents and a couple of cars...

When they ask what they can do to get my business; I tell them to apologise for being such arseholes when I was younger.

Now I just use Shannons.

Edited by Daleo

I'd be very careful with that.

If you are involved in an accident, and they deem you a regular driver but are not listed; they will void the policy.

The reason they quote high is because statistically, as a young driver; you are a high risk. Irrespective of your personal record.

It's part of life; I just refuse to use the companies now that ripped me off as a young driver.

They clamour for your business once you own a house, contents and a couple of cars...

When they ask what they can do to get my business; I tell them to apologise for being such arseholes when I was younger.

Now I just use Shannons.

NRMA will cover anyone that drives the car even if they are not listed, I double checked before I took the policy. It's just higher excesses.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Good morning all, Bit of a random question but figured I’d finally throw it out after wondering for a long while. Before I start, I'm hoping to do this purely out of personal preference. I think it would look better at night, and don't mind at all spending a few hours and dollars to get it done. I've copied this from a non-Skyline specific forum, so I apologize for the explanation of our headlight switch setup that we all know. Here we go: Zero lights (switch off) Parking lights (switch position 1) being a rectangular marker on the outside of the housing, my low beam being the projector in the centre (position 2), and a high beam triggered by my turn signal stalk. Most North American cars I’ve owned of this era have power to the amber corner (turning indicator) light as part of the first switch (parking lights). I’d love to have these amber corners receive power when the headlights and parking lights are on (headlight switch), yet still blink when using the turn signal which is of course a separate switch. Hopefully I’ve explained my question correctly. Is anyone aware of a way in which I might be able to achieve this? Thanks in advance
    • My heads are cathedral port! It's likely possible, but I don't want to add any extra moving parts (I know they don't move) between the heads, manifolds, etc. It will also affect how injectors/fuel rails etc sit and I don't really know if it would change how the FAST manifold goes/sits/fits. I have the LS6 steam pipes already as I have a very late LS1 block so it should be fine. I couldn't find anyone who had ever actually used one for this purpose, it seems 100% of people grind the water pump. The thermal spacers are 12mm and are half way to the cost of the newer water pump anyhow... so if it comes to that I suppose I'd rather buy a new pump. The bearing in the pump I do have is a little.. clunky, but it hasn't done that much time and I never noticed it when the car was together in the past few years, so..
    • The bushing has failed, not all that uncommon for a car of this age.  Any mechanic should be able to push in a new bushing for you, or you can probably buy the entire lower control arm, complete with bushes.
    • Could you not use "thermal" spacers to give the clearance, like the ones I used between the blower and head? That raised the manifold height by around 10-15mm Albeit the ones I used were for cathedral ports, but I assume they have similar for rectangular ports????
    • Thanks Paul I reached out to Autotainment but they no longer work on JDM cars as the guy who used to do the work moved on and is no longer doing that kind of work. I am talking with Level Up Audio though.
×
×
  • Create New...