Jump to content
SAU Community

Recommended Posts

Skipped gym tonight, too many little niggles and sore bits, ankle in particular, especially after pulling the box in the car yesterday.

Just went for a walk instead, will see how I feel Wednesday but may take a full week off as its been a while since I've done that and I promised myself I would to avoid injuries.

Good idea Dan, I'm doing the same due to lack of sleep over the last 7 days. I'm still doing cardio tomorrow, but am missing two weight sessions (which is 4 days off) will return to weights on Wednesday.

Hope you feel better soon.

Hammy is still twinging for no apparent reason, does it when I walk, does it when I sit, just random times also.

Have been stretching and manual manipulating my ankle recently as asked by the physio and getting out of the car this morning it twinged decently and I had trouble walking up the steps to work, not feeling too bad now but geezus for a second I thought something major had gone wrong. It still has a way to go.

I may take tonight off also and just see if I can get any improvement on this hammy.

Skipped Gym again last night and didn't walk this morning, Hammy still twinging when I got up so I'm going to see a Myo today if I can get in. AT least my forearms/wrists and my bad ankle are feeling better.

I may just gym Friday anyway as I can feel myself wasting away and getting weaker by the day, yes I know it all comes back, but it'll take 1-3 sessions to go back to where I was.

Taking time off hasn't helped the hammy so far anyway, maybe a little but not much.

Edited by ActionDan

Sounds like a good idea. I find more it difficult mentally to get back into it after a break. Hope you get your hammy sorted out today, good luck :)

Edited by L33SH

Mentally I'm a bit all over the shop at the moment with a lot of questions about why I'm doing this etc etc, but whenever I stop I always have that burn to start again, even if it's only been a week like it has been this time.

I've said before I might buy some new plates, to give me something to aim at, but I'm also thinking I might mix up the squat stuff and see if I can build reps at say 100kg to get a foundation in place as I'm such a shit squatter.

good stuff, I have found at times even with ningling issues, if I get in and just start lifting or whatever else they tend to go away.

might be the mma background in me where I was always injured but had to train or fight with them.

depends how bad it is, and obviously your ankle has to be taken into consideration

It was just good timing in a way, I needed a deload week, come Friday I'll have had 7 days off, (but have been working on the car...)

I'll get the rub today, lift tomorrow and see how I feel over the weekend on my 2 day break (though will be at the car again lol)

They only had a remedial masseuse there and from what I could tell she was fairly green.

Still, she worked on it and it wasn't twinging when I walked out. She thinks is just a strain between the hammy and the upper head of the calf muscle (gastroc).

She massaged it and "cupped" it and said get crazy with the foam roller and stretching as it was quite tight and fairly firm which is always what people say when I have an issue.

I might head back to Matt soon for a form check as my gammy leg still throws some things out and the left leg may be taking the brunt of the load.

Went for a walk last night and this morning, there's still a light twinge but I'm inclined to say it's slightly better, but not "sorted".

I'll gym tonight, maybe only 4 sets instead of 5 (I usually come back a touch lighter on my first session anyway for safety) and see how I pull up.

Was talking to a mate of mine last night who is training for BB comp and he's at the same point as me in terms of why am I doing this so it seems there's a bit of it going around at the moment.

if you have a hard table or something, sit on it with ur legs hanging over the side, put a cricket ball or a golf ball under your hammys and basically do the same movements as the foam roller.

hurts a lot more, but helps relieve some pressure.

Yeah I did that.

I've started stretching my calves more too to see if that helps release it as suggested by the masseuse.

I'm also thinking I might switch back to a 3x8 routine, still increasing weight each set though. As I think this might suit my goals a bit more, which is more about looks than it is about weight to be honest.

After thinking about what "I" wanted from Gym I've decided to go back to 3x8s due to increase sarcoplasmic hypertrophy. Which is just essentially being a bit bigger/more defined but not necessarily being as strong and I'm OK with that as I'm probs 60/40 looks/strength in my goals. This will also save me a few minutes in rest breaks and I'm looking to reduce the time invested.

So with that in mind I gym'd last night and knowing full well I'd be weaker from the weak off chose weights I thought I'd fail in the later parts of set 3 and I was right. Pulld up OK today, but during the sets I forgot how much harder the extra reps are when they are continuous. I also had a breif fiddle with incline bench, felt really alien and weak, ditched it but may try again.

So.

Squats

80.5 90.5 100 (5 reps)

Bench

93 101.5 106.5 (7 reps)

DL

88 97.5 104 (7 reps)

Rows

78 88 93 (6 reps and sloppy)

Chins

7.5 12.5 15 (6 reps)

Dips

15 20 25

So dips was the only thing I got fully through and only just :D

This week I'll stick to those numbers and get the full 3x8 out then after that I'll start increasing weights again and will treat it such that when I can get 6-7 reps on the final set I'll add again.

Hammy doesn't feel too bad today but I'm about to go turn some spanners so we'll see how it feels later.

Was good to do a session :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Didnt realise RB's had more then 1 head.
    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
×
×
  • Create New...